%
With " touch screen" embedded computerRealization in painted steel (epoxy paint), frontal realization in stainless steel AISI 304.* Washing machine (electric)Motorized closing of the porthole.Anti-balance control (ground anchor not necessary).Multilingual, 200 memorizable programs (8 programmed from factory).Super spin-drying 1000 turns/min. (factor-G 300).Stainless steel tank and basket AISI 304.Residual humidity 50%.Cold or warm water connection.Upper basin with 3 compartments for washing...
%
- Water condenser.- Versatile pasto turbine cookers for cooking, tempering, pasteurizing and freezing all mixtures or pastes. - Multilingual display with 14 pre-programmed cycles and 10 programmable production cycles. - Different heat treatments are carried out in a single cylinder, avoiding any handling or transfer. - Possibility of slow, fast or intermittent agitation. - Automatic memory of the last cycle. - Mix per cycle: 30/60 litres. - Cycle time: 90/130 min.
%
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Stainless steel base AISI 304 18/10.Electric heating, thermostat from 30 to 90°C.Adjustable thermostat from 30°C to 90°C.Rubber feets.
%
%
%
%
Realisation in anodized aluminium, base in stainless steel.Automatic or manual cutting.Programmation of the cutting from 10 to 50 slices or continuous.Blade in stainless steel AISI 304, automatic sharpening.Blade protection easy to remove.Cut capacity 245x300 mm, cut adjustment from 0 to15 mm, trajectory of carriage 330 mm, plate 270x260 mm.Low tension control 24 V.Belt drive.
%
Realisation in anodized aluminium, base in stainless steel.Automatic or manual cutting.Programmation of the cutting from 10 to 50 slices or continuous.Blade in stainless steel AISI 304, automatic sharpening.Blade protection easy to remove.Cut capacity 245x300 mm, cut adjustment from 0 to15 mm, trajectory of carriage 330 mm, plate 270x260 mm.Low tension control 24 V.Belt drive.
%
Vacuum pump capacity 250m3/h (Busch type).Cycle time 15-30 seconds.Stainless steel cover.Chamber dimensions: 2x 1100x730x230 mm (Sealing length: 4 x 1100mm).Working height 900 mm.4 sealing bars (2 per chamber)Digital control panel with 10 programs, maintenance program and pump cleaning.Soft air: gradual vacuuming.On request: gas injection system "nitrogen", ....Professional machines on pedestals.Vacuum is managed in % thanks to the integrated vacuum sensor, no more risk of inadvertent...
%
%
%
Chamber: 1050x700x150 mm (9 kW), 6 pizzas Ø 350 mm.2 ovens superposable (6+6 )Stainless steel front side, "decorative" removablehood, independent and "ergonomic" switch panel in painted steel.Bottom refractory stones chamber, high thickness fibreglass insulation.Adjustable steam exhauster, against shock built-in inner light, suitable for high temperatures 500°C.Door with spring system hinge, double thermal handle, large dimensions safety door glass, gasket in ceramic fibreglass.Heating by...
%
%
Dough weight 80 to210 gr. adjustable pizza diameter 140 to 310 mm. Very flexible and performing rolling machines.Front and lateral structure in stainless steel AISI 304, back carter in white sheet.Cold rolling, round shaped pizza dough (oblique top roller couple).Food suitable Teflon rollers; they have adjustable thickness grip, plexiglass top protection, bottom protection in stainless steel.Electric switches at low tension 24 Volts, finger touch.The equipment is manufactured following the...
%
2 distinct flat surfaces, the upper surface (service side) is placed 70 mm above the first (better visibility of the food)Capacity 2x GN 1/1Built-in dimensions 765x585 Flat surfaces, with a slightly raised peripheral edge, allowing for better food exposure.Cooling by means of a coil evaporator (made of copper), placed just below the plate .1/2" drainControl panel (service side) with electronic 0° +8° control, digital displayCFC-free polyurethane foam insulationPredisposed for the placement of...
%
Capacity 3x GN 1/1.Recessed dimensions 1090x585. Flat surface, with a slightly raised peripheral edge, allowing better food exposure.Cooling by a coil evaporator (copper), placed just below the plate.Drain 1/2"Control panel with electronic regulation from 0° +8°, digital displayCFC-free expanded polyurethane insulationPredisposed for the placement of an additional thermometer to display the T° on the customer side (On request)Integrated refrigeration unit, refrigerant R290aAutomatic...
%
Tours/minute: rpm 15000. Conçu pour petites productions.Bloc moteur avec corps en PVC, poignée ergonomique.Protection IP34.Tube démontable.Tube mixer, couteau et cloche en acier inox AISI 304, le couteau se démonte aisément.Interrupteur On/Off, démarrage direct ("DVC" dispositif vitesse constante, équipé de série).Dispositif de sécurité en cas de surchauffe.Appareil construit dans le respect des normes (CE) en vigueur.
%
Structure in AISI 304 stainless steel.Polycarbonate tank (capacity from 3 to 5.5 litres), with 2-part lid for easy filling, equipped with a "self-cleaning" metering tap.Vertical evaporator, made of AISI 304 stainless steelRefrigerant gas R290, vertical mixing system "exclusive patent" guaranteeing perfect homogeneity (without foam formation!).Very versatile, regulating the fineness of the "granita".Fully removable, making daily maintenance easier.Appliances built in compliance with the...
%
Temperature setting on each tank (+2° to +8°C).Polycarbonate tanks, ABS cover, equipped with metering valve, completely removable for easy maintenance.Rotating pallet system (thus avoiding foam problems).Tropicalized thermal unit (ambient temperature +43°C).Refrigerant evaporator in stainless steel AISI 304.Refrigerant gas R290The device is built in compliance with the current CE standards.
%
2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible (kit is not necessary),...
%
Glass doors with integrated LED-light.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without rougness).Doors with ergonomic handle and reversible...