%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Stainless steel base AISI 304 18/10.Electric heating, thermostat from 30 to 90°C.Adjustable thermostat from 30°C to 90°C.Rubber feets.
%
%
%
%
Cooling capacity 1577 (W/f) for chamber volume 16,3 m³ / 16300 Lit (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve. Supplied with a cable for the connection of the door heater. "Overlapping" refrigeration units.Unit certified in climatic class 5 (40°C Temperature - 40% Humidity).All units are supplied as standard with a high pressure switch and KVL valve.Automatic hot gas defrost with self-evaporation and overflow.The evaporator drain pipe is equipped...
%
Realisation in anodized aluminium, base in stainless steel.Automatic or manual cutting.Programmation of the cutting from 10 to 50 slices or continuous.Blade in stainless steel AISI 304, automatic sharpening.Blade protection easy to remove.Cut capacity 245x300 mm, cut adjustment from 0 to15 mm, trajectory of carriage 330 mm, plate 270x260 mm.Low tension control 24 V.Belt drive.
%
Realisation in anodized aluminium, base in stainless steel.Automatic or manual cutting.Programmation of the cutting from 10 to 50 slices or continuous.Blade in stainless steel AISI 304, automatic sharpening.Blade protection easy to remove.Cut capacity 245x300 mm, cut adjustment from 0 to15 mm, trajectory of carriage 330 mm, plate 270x260 mm.Low tension control 24 V.Belt drive.
%
An intermediate glass.Double LED lighting of the display (under the upper and lower glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM ).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work surface.LED...
%
LED lighting of the exposure (under the upper glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles.Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM ).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work surface.LED lighting of the exposure.Intermediate...
%
Two intermediate glass.Double LED lighting of the display (under the upper and lower glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM ).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work surface.LED...
%
%
%
%
Dough weight 80 to210 gr. adjustable pizza diameter 140 to 310 mm. Very flexible and performing rolling machines.Front and lateral structure in stainless steel AISI 304, back carter in white sheet.Cold rolling, round shaped pizza dough (oblique top roller couple).Food suitable Teflon rollers; they have adjustable thickness grip, plexiglass top protection, bottom protection in stainless steel.Electric switches at low tension 24 Volts, finger touch.The equipment is manufactured following the...
%
2 distinct flat surfaces, the upper surface (service side) is placed 70 mm above the first (better visibility of the food)Capacity 2x GN 1/1Built-in dimensions 765x585 Flat surfaces, with a slightly raised peripheral edge, allowing for better food exposure.Cooling by means of a coil evaporator (made of copper), placed just below the plate .1/2" drainControl panel (service side) with electronic 0° +8° control, digital displayCFC-free polyurethane foam insulationPredisposed for the placement of...
%
Capacity 3x GN 1/1.Recessed dimensions 1090x585. Flat surface, with a slightly raised peripheral edge, allowing better food exposure.Cooling by a coil evaporator (copper), placed just below the plate.Drain 1/2"Control panel with electronic regulation from 0° +8°, digital displayCFC-free expanded polyurethane insulationPredisposed for the placement of an additional thermometer to display the T° on the customer side (On request)Integrated refrigeration unit, refrigerant R290aAutomatic...
%
Tours/minute: rpm 15000. Conçu pour petites productions.Bloc moteur avec corps en PVC, poignée ergonomique.Protection IP34.Tube démontable.Tube mixer, couteau et cloche en acier inox AISI 304, le couteau se démonte aisément.Interrupteur On/Off, démarrage direct ("DVC" dispositif vitesse constante, équipé de série).Dispositif de sécurité en cas de surchauffe.Appareil construit dans le respect des normes (CE) en vigueur.
%
Structure in AISI 304 stainless steel.Polycarbonate tank (capacity from 3 to 5.5 litres), with 2-part lid for easy filling, equipped with a "self-cleaning" metering tap.Vertical evaporator, made of AISI 304 stainless steelRefrigerant gas R290, vertical mixing system "exclusive patent" guaranteeing perfect homogeneity (without foam formation!).Very versatile, regulating the fineness of the "granita".Fully removable, making daily maintenance easier.Appliances built in compliance with the...
%
Temperature setting on each tank (+2° to +8°C).Polycarbonate tanks, ABS cover, equipped with metering valve, completely removable for easy maintenance.Rotating pallet system (thus avoiding foam problems).Tropicalized thermal unit (ambient temperature +43°C).Refrigerant evaporator in stainless steel AISI 304.Refrigerant gas R290The device is built in compliance with the current CE standards.
%
2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible (kit is not necessary),...
%
Glass doors with integrated LED-light.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without rougness).Doors with ergonomic handle and reversible...
%
"Wall" model with back board.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...