%
Temperature: -2° -14°C- Manufactured in solid wood.- Plexiglas dome.- Stainless steel AISI 304 display area.- Built-in airtight unit (ambient t° +32°C).- Static evaporator treated against the "coating" acids and the salts. - Refrigerant R134A.- Frame on castors.- Manual defrosting.NB: for the temperature update, this trolley needs to be connected on an electric network +/- 2 hours in advance ; then store the ice cream which might be at its service temperature (-14°C), this trolley isn't...
%
Turns/minute: 15000 rpm.On/Off switch, stainless steel screws.. ABS molded body, inner stainless steel and aluminium structure, polished aluminium hopper, 2 liters receiving receptacle en ABS molded.. Fitted with safety microswitch on hopper lever and receiving receptacle, fitted with thermal motor relay.. Sturdy belt-driven transmission, minimal power loss.. The equipment is manufactured following the (CE) standards in force.
%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Turns per minute: 2600 rpm.Tank capacity: 3,3 Lt.Useful tank capacity: 1,5 Lt. Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High safety guaranteed by a double...
%
Standard with speed drive.Turns per minute: 1100/2600 rpm.Tank capacity: 5,3 LtUseful tank capacity: 3,1 Lt Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High...
%
%
- Turns/minute: rpm 145.- Duration of the production cycle 90-120 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control panel...
%
- Turns/minute : rpm 180.- Duration of the production cycle 120-150 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control...
%
Temperature setting on each tank (+2° to +8°C).Polycarbonate tanks, ABS cover, equipped with metering valve, completely removable for easy maintenance.Rotating pallet system (thus avoiding foam problems).Tropicalized thermal unit (ambient temperature +43°C).Refrigerant evaporator in stainless steel AISI 304.Refrigerant gas R290The device is built in compliance with the current CE standards.
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable) widely sized....
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable) widely sized....
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating, "hard-wearing".Strengthened protection cables for a better security without affecting the heat distribution.
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating.Strengthened protection cables for a better security, without affecting the heat distributionLateral supports for heating bridge.Chromium-plated feet, in the shape of "C".Free space underneath the heating bridge: 343 mm.
%
Ventilated refrigeration, temperature: +2° +10° .Light box.Internal dimensions 585x495xh1515 mmRefrigerant gas R600aStandard: 6 adjustable grids 574x405 mm. Exterior manufactured in plastic laminate (white), interior in molded ABS (white).Interior lighting, On-Off switchMechanical thermostat, with an analog display thermometer.Double glazing door (Thermopane®), reversible, with chassis in anodised aluminum, handle (very robust), door hinges with stop 100°, closing with magnetic seal.Included...
%
Ventilated refrigeration, temperature: +2° +10° .Light box.Internal dimensions 585x495xh1515 mmRefrigerant gas R600aStandard: 6 adjustable grids 574x405 mm. Exterior manufactured in plastic laminate (white), interior in molded ABS (white).Interior lighting, On-Off switchMechanical thermostat, with an analog display thermometer.Double glazing door (Thermopane®), reversible, with chassis in anodised aluminum, handle (very robust), door hinges with stop 100°, closing with magnetic seal.Included...
%
%
Produces 24 kg per 24 hours, recessed version, Reserve in ABS (polyurethane insulation), capacity 4 kg.Air condenser."Spray" system with brass nozzles, (designed to prevent the magnetization of limestone).Tropicalized hermetic unit ambient temperature + 43 ° CRefrigerant gas R404a or R452a, air-cooled condenser.Manufactured in stainless steel AISI 304, adjustable feet.The equipment is manufactured following the (CE) standards in force.
%
%
- Dimensions tank 310x510xh180 mm.- Manufactured in stainless steel AISI 304, with adjustable feet in stainless steel- Top "pressed" with lateral edges.- Tank pressed stainless steel AISI 304 with perforated base.- Electric heating by armoured element in stainless steel, placed under the tank. Controlled temperature 30°C to 90°C by thermostat.
%
Inside volume: 122 liters.Inside dimensions: 508x355xh720 mm.Load capacity: 161 cans (33 cl.) or 84 bottles (33 cl.).1 swingdoor on hinges, (reversible).Included: 2 grids 498x335 mm.Cooling R600a.Glass door(s), double glazing, "Thermopane"®.Closure by keys.Interior lighting type LED.Included: for each door, 2 adjustable shelves and removable height.Built-in compressor unit climatic class 4 (30°C & 55% HR).Sound level 45 db (A).Electronic regulation, digital display T ° + 2 ° + 10...
%
Glass doors (Thermopane®) 510 mm wide, useful passage 470xh737 mmLED lighting, on each doorInternal dimensions 1120x430x737 mm2 rilsanized grids (450x430 mm) per door, adjustable, 3 interior storage (standing bottles) free height 737 mmLoad capacity in bottles 33cl = 294, in cans 33 cl = 420, 50 cl = 252Height without feet 820 mm4 adjustable feet (70 mm).Outside realization in Skinplate (color black), inside in Skinplate (color white), food guarantee and against corrosion (7 years...