%
Stainless steel tank and drum AISI 304.Steel base (epoxy paint).Mechanic timer from 0 to 15 minutes.Delivered with bolts for the ground anchor.
%
%
- Version to fit in to or to put down. - Delivered with 2 pressure bottles, with one tap fit on to 3 exits (easy dosing).- Thermostatic control until 90°C, hold temperature = 50°C. (without overheating nor desiccation).- Electrical resistance around the stainless steel tray.- Electronic timer.
%
- Air condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 15/30 litres. - Cycle time: 80/120min.
%
- Air condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 15/30 litres. - Cycle time: 80/120min.
%
- Water condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 15/30 litres. - Cycle time: 80/120min.
%
- Water condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 15/30 litres. - Cycle time: 80/120min.
%
%
%
- 6 shafts for cups, height 500 mm.- 6 built-in spoon holders.- Top part in stainless steel, with coating.- Heating through an independent rotating resistance.- Inner plate rotating on 360°, mounted on 6 wheels.
%
%
%
Special for carpaccio, cheese...Manufactured in anodise aluminium, cutting capacity 200x150 mm."Dry" gear transmission system, adjustable cutting distance 0-15 mm.“Non-stick”, chrome-plated, hardened steel blade (6-year warranty).Automatic sharpener.Control (24 V).
%
%
Structure support AISI 304 for gastronome tray, maximum depth 150mm.Refrigerated display vat available only on ventilated showcase.Bain-marie and dry heat display vat available only on neutral display case.NB: It is recommended not to put an intermediate shelf.
%
- Flue spigot diam 250 mm.NB : recommended for machines without steam condenser DVM-C.
%
Capacity 4x GN 1/1.Recessed dimensions 1415x585. Deep-drawn tank 160mm deep (GN-150mm trays), rounded corners and corners (perfect hygiene)1/2" drain.Cooling by a coil evaporator (copper), placed just below the tankControl panel with electronic regulation of +2° +8°, digital displayCFC-free expanded polyurethane insulationPredisposed for the placement of an additional thermometer to display the T° on the customer side (On request)Integrated refrigeration unit, refrigerant R290aAutomatic...
%
2 distinct flat surfaces, the upper surface (service side) is placed 70 mm above the first (better visibility of the food)Capacity 3x GN 1/1.Recessed dimensions 1090x585. Flat surfaces, with a slightly raised peripheral edge, allowing for better food exposure.Cooling by means of a coil evaporator (made of copper), placed just below the plate .1/2" drainControl panel (service side) with electronic 0° +8° control, digital displayCFC-free polyurethane foam insulationPredisposed for the placement...
%
Recommended for machines with rinsing pump or "Break Tank" device.Productivity 150 Lit/h (water 15°C).3 separate compartments, hydraulic, inspection (front), electric.Pressure gauge(s) to display the water pressure.Membrane removable from the front.Activated charcoal filter, including by-pass function. Made of stainless steel.
%
With expansion tank (5,5 Lit. at 3 bar), for all kind of machines.Productivity 150 Lit/h (water 15°C).3 separate compartments, hydraulic, inspection (front), electric.Pressure gauge(s) to display the water pressure.Membrane removable from the front.Activated charcoal filter, including by-pass function. Made of stainless steel.
%
Capacity 380 Lit.Equipped with: 4 adjustable grids, 499x360mm Load capacity: 455 cans 33cl or 217 bottles 50 cl.Interior made of ABS, exterior made of white lacquered steel.Mechanical thermostat.Digital thermometer.Key locks on the frame, delivered as standard.Door with reversible handle (see ref. CK38/SE).Light box and LED lights in the door frame, controlled by on/off switch.Ventilated evaporator type "ROLLBOND".Refrigerant R600a.Automatic defrosting with auto evaporation.2 unidirectional...
%
- Double model to alternate all types of cooking.- Useful dimensions plate: 535x240 mm.- Food enamel plates with high thermal conductivity value. - Easy and easy maintenance, thanks to its juice drawer, 100% smooth surface and scraper, which is delivered as standard. - Smooth lower plate, grooved upper plate, self-balancing with adjustable pressure spring (new concept, more flexible, easy regulation!) and equipped with an all-stainless steel handle (very robust). - Heating by means of "coloy"...
%
Oven "LENGTHWISE" loading plates GN 1/3, 1/2 and 2/3Standard with 1 GN Grid 2/3Compact ovens.Direct steam by "nebulizer".Convection heating: by stainless steel armored heating elements placed behind the turbine deflector.In depth loading, spacing 67 mm.Easy after-sales service, access to controls from the lateral part.Turbine deflector on hinges, easy maintenance.Cooking chamber stainless steel AISI 304, rounded corners and edges.Condensate harvest bowl, below the door.Halogen light.Door with...
%
Designed in stainless steel.Energy saver system.Regulation of the speed.Completely thermal appliance.Permanent stocking which allows keeping them warm and in a dry place.Bread support, dimensions 254x177 mm.Productivity, 12 toasts/minute.Maximal thickness of the toasts: 32 mm.