%
%
- 6 shafts for cups, height 500 mm.- 6 built-in spoon holders.- Top part in stainless steel, with coating.- Heating through an independent rotating resistance.- Inner plate rotating on 360°, mounted on 6 wheels.
%
"Dry" gear transmission system.Blade in stainless steel, anti-stick.Manufactured in anodised aluminium, automatic sharpener.Cutting capacity 200x150 mm, adjustable cutting distance 0-15 mm.
%
%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
- Flue spigot diam 250 mm.NB : recommended for machines without steam condenser DVM-C.
%
Recommended for machines with rinsing pump or "Break Tank" device.Productivity 150 Lit/h (water 15°C).3 separate compartments, hydraulic, inspection (front), electric.Pressure gauge(s) to display the water pressure.Membrane removable from the front.Activated charcoal filter, including by-pass function. Made of stainless steel.
%
With expansion tank (5,5 Lit. at 3 bar), for all kind of machines.Productivity 150 Lit/h (water 15°C).3 separate compartments, hydraulic, inspection (front), electric.Pressure gauge(s) to display the water pressure.Membrane removable from the front.Activated charcoal filter, including by-pass function. Made of stainless steel.
%
- Deep-drawn top top 15/10th - 2 stainless steel lifting arms - Possibility of right or left positioning, see one on each side (4 baskets version) - 9 programs to choose from "memorable" or manual - Front accessibility for all maintenance - Water protection degree IPX4 - Made of AISI 304 stainless steel, 2 adjustable stainless steel feet - Appliances built in compliance with current standards (CE)ADVANTAGE - PASTA CONCEPT : - You want to diversify your menu with delicious pasta. To be able to...
%
Deep-drawn top top 20/10 th3 stainless steel lifting armsPossibility of right or left positioning, see one on each side (version 6 baskets)9 programs to choose from "memorable" or manualFront accessibility for all maintenanceWater protection degree IPX5Made of AISI 304 stainless steel, 2 adjustable stainless steel feetAppliances built in compliance with current standards (CE)
%
- Diameter of the basin 420, depth 485 mm.- Outlet tap of 1,1/2".- Made of AISI 304 stainless steel, "deep drawn" top (15/10th), adjustable stainless steel feet (150/200 mm), waterproof "IPX5". - Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the tank. - Deep-drawn" cover, made of AISI 316 stainless steel with double...
%
Diameter of the basin 420, depth 485 mm.Outlet tap of 1,1/2". Made of AISI 304 stainless steel, "deep-drawn" top (15/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the tank.Deep-drawn" cover, made of AISI 316 stainless steel with double walls...
%
Version 8 drawers GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Right panel(s) in "toughened glass".Created for bakery, pastry, snack,...Stainless steel exposition plan AISI 304.Without storeroom.Granite work display.Series intermediary glass, with lighting.
%
Right panel(s) in "toughened glass".Created for bakery, pastry, snack,...Stainless steel exposition plan AISI 304.Without storeroom.Granite work display.Series intermediary glass, with lighting.
%
Right panel(s) in "toughened glass".Created for bakery, pastry, snack,...Stainless steel exposition plan AISI 304.Without storeroom.Granite work display.Series intermediary glass, with lighting.
%
Right panel(s) in "toughened glass".Created for bakery, pastry, snack,...Stainless steel exposition plan AISI 304.Without storeroom.Granite work display.Series intermediary glass, with lighting.
%
Tank diameter 600 mm, depth 420 mm.Deep-drawn" tank, bottom made of polished AISI 316 stainless steel (20/10 mm thick) wall made of 304 stainless steel (20/10 mm thick). Indirect heating, double jacket made of 304 stainless steel (15/10 mm thick). Made of AISI 304 stainless steel, version on AISI 304 stainless steel columns (delivered with floor fixing kit). Covering: made of AISI 304 stainless steel (10/10 mm thick). Work surface: made of AISI 304 stainless steel (15/10 mm thick).Deep-drawn"...
%
Tank diameter 600 mm, depth 540 mm.Deep-drawn" tank, bottom made of polished AISI 316 stainless steel (20/10 mm thick) wall made of 304 stainless steel (20/10 mm thick). Indirect heating, double jacket made of 304 stainless steel (15/10 mm thick). Made of AISI 304 stainless steel, version on AISI 304 stainless steel columns (delivered with floor fixing kit). Covering: made of AISI 304 stainless steel (10/10 mm thick). Work surface: made of AISI 304 stainless steel (15/10 mm thick).Deep-drawn"...
%
Tank diameter 400 mm, depth 465 mm."Deep-drawn" tank, bottom made of polished AISI 316 stainless steel (20/10 mm thick) wall made of 304 stainless steel (15/10 mm thick). Indirect heating, double jacket made of 304 stainless steel (15/10 mm thick). Made of AISI 304 stainless steel, stainless steel base. Covering: made of AISI 304 stainless steel (10/10 mm thick). Work surface: made of AISI 304 stainless steel (15/10 mm thick)."Deep-drawn" tank wall made of 304 stainless steel, bottom made of...
%
Inside volume: 122 liters.Inside dimensions: 508x355xh720 mm.Load capacity: 161 cans (33 cl.) or 84 bottles (33 cl.).1 swingdoor on hinges, (reversible).Included: 2 grids 498x335 mm.Cooling R600a.Glass door(s), double glazing, "Thermopane"®.Closure by keys.Interior lighting type LED.Included: for each door, 2 adjustable shelves and removable height.Built-in compressor unit climatic class 4 (30°C & 55% HR).Sound level 45 db (A).Electronic regulation, digital display T ° + 2 ° + 10...