%
3 Filters ANTI-FAT labyrinths (2x 400x500 & 1x 500x500 mm) Model with built-in centrifugal fan "watertight" (IP55) (central position, in vertical).Designed in stainless steel AISI 441, assembly by points welding.Filters anti-fat has stainless steel labyrinths AISI 430.Peripheral channel for the fat collection, fitted with a drainage tap.Built-in lighting (LED) waterproof (IP65), high temperature.Speed regulator built-in the frontal.
%
Frame in stainless steel, all the parts that are in contact with the dough are also in stainless steel.Adjustement of the thickness from the sheet.Warning device to protect the roller.
%
%
%
Oven "CROSSWISE" loading plates GN 2/1 ( or GN 1/1).1 transfer carriage and 1 detachable pitch of 60mm "anti tilting".Adjustable feet in stainless steel. Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable....
%
Cooling capacity 3490 (W/f) for room volume 34,3 m³ / 34300 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve.Also equipped with a high pressure switch (fixed calibration) (C-PMAX-R). Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a...
%
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Stainless steel sheet structure.Heated by electric elements.Adjustable thermostat from 30 to 90°C solo per piano.Upper frame with infrared lamps (3x250 W).Separate switches for food warmer surface and infrared lamps.Anti-germ plexiglas protection.
%
Cooling capacity rendered 2961 (W/f) for chamber volume 28,2 m³ / 28200 Lit. (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Ceiling" refrigeration units.All units are supplied as standard with a high pressure switch and KVL valve as well as cables for door and light micro-switches.Separate control panel, connected to the unit by a 5m cable, control of the functions by microprocessor with touch-sensitive keys.Automatic hot gas defrosting with self-evaporation,...
%
Capacity: 10x GN1/4, 1x 1/9 h 150 mmSupport strip trays GN 1/9 are delivered standard.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by...
%
Capacity: GN 12x 1/4, 1x 1/9 h150 mm.Support strip trays GN 1/9 standard delivered.NB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting...
%
Capacity: GN 10x1/3 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Capacity: GN 11x 1/3, 1x 1/9 h150 mmSupport strip trays GN 1/9 standard delivered.NB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting...
%
Oven "CROSSWISE" loading plates GN 2/1 ( or GN 1/1).1 transfer carriage and 1 detachable pitch of 60mm "anti tilting".Adjustable feet in stainless steel. Internal construction in stainless steel AISI 304 and external construction in stainless steel AISI 430, thermal insulation in ceramic fiber.Stainless-steel feet.Cooking chamber: fully welded, rounded corners and edges. Sealing gasket fixed on the front of the cooking chamber. Stamped bottom collects condensation towards the drain. Plate...
%
%
Energy efficiency class : C (Climate Class 4 “room temperature +30C° - relative humidity 55%”).Endowment : 3 grid GN 2/1 (530x650 mm).Refrigerant R600a.Delivered with 4 wheels, 2 with brakes. Made of food-grade stainless steel, with AISI 304 interior and AISI 441 exterior (gray treated steel at the back), monocoque frame.Internal embossed side panels.Embossed interior bottom with rounded angles and corners (smooth surface without roughness).Bottom equipped with a drain plug for major...
%
Energy efficiency class : B (Climate Class 4 “room temperature +30C° - relative humidity 55%”).Endowment : 3 grid GN 2/1 (530x650 mm).Refrigerant R600a.Delivered with 4 wheels, 2 with brakes. Made of food-grade stainless steel, with AISI 304 interior and AISI 441 exterior (gray treated steel at the back), monocoque frameInternal embossed side panels.Embossed interior bottom with rounded angles and corners (smooth surface without roughness)Bottom equipped with a drain plug for major...
%
%