%
Connection cold or warm water.Upper basin with 3 compartments for washing products.Emergency stop button, "Hot shot" kind.Stainless steel base allowing the ground anchor.Designed in stainless steel AISI 304.
%
- Water condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 60/120 litres. - Cycle time: 100/120 min.
%
- Water condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 60/120 litres. - Cycle time: 100/120 min.
%
3 Filters ANTI-FAT labyrinths (2x 400x500 & 1x 500x500 mm) Model with built-in centrifugal fan "watertight" (IP55) (central position, in vertical).Designed in stainless steel AISI 441, assembly by points welding.Filters anti-fat has stainless steel labyrinths AISI 430.Peripheral channel for the fat collection, fitted with a drainage tap.Built-in lighting (LED) waterproof (IP65), high temperature.Speed regulator built-in the frontal.
%
Internal dimensions 660x420xh820Standard equipment: 1 grid EN 600x4003 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
%
Frame in stainless steel, all the parts that are in contact with the dough are also in stainless steel.Adjustement of the thickness from the sheet.Warning device to protect the roller.
%
%
4 separate cooking zones Ø 230 mm (4x 3,5 kW).Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders, waterproof "IPX4".Ceramic glass induction hob (6 mm). Focus diameter 230 mm, energy regulator.Principle of INDUCTION:The heat is produced by a magnetic field directly inside the container, this field is created electronically, there is no heating element, which gives it great security. Cooking is done almost without any heat loss; it is the most economical...
%
- 5 independent plates, Ø 180 mm (5x 2 kW). - Electric convection oven GN 1/1 (3 kW), 530x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 5 independent plates, Ø 180 mm (5x 2 kW). - Electric convection oven GN 1/1 (3 kW), 530x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- Useful dimensions of the cooking surface 995x520 mm, 49,40 dm2- Manufactured in stainless steel 18/10 AISI 304.- Cooking plates in cast iron with high conduction of heath, equipped with a welded peripheral border, to guarantee a perfect cover-up. Frontal catching drawer for cook fluid.- Electric heating, through stainless steel resistance, situated under the plate itself. Temperature regulation through a thermostat from 120°C to 320°C.Version : - with hard chrome plate "50 µm".
%
4 zones Ø 220 mm independent (4x 3,5 kW).AISI 304 stainless steel construction, adjustable cylindersWatertight top (15/10 mm) in AISI 304 stainless steel.Rear chimney in stainless steel AISI 304.Cooking top, watertight "IPX4".Glass ceramic hob (6 mm), with 4 independent inductors underneath.Energy regulator with 6 positions (each hearth), with pilot light, front access for easy maintenance.INDUCTION Principle: The heat is produced by a magnetic field directly inside the container, this field...
%
Plate (755x625 mm), with 4 zones (4x 3,5 kW)Open cupboard (GN 2/1) (760x740xh360 mm).Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304.Cooking surface, watertight "IPX4".Plate (15 mm) in cast iron, heating by resistors positioned below.Combustion chamber thermally insulated with glass wool.Regulation (+/- de 80° to 450°C) by 7-position switch (each fireplace),...
%
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Capacity: 10x GN1/4, 1x 1/9 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic...
%
Capacity: GN 12x 1/4, 1x 1/9 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at...
%
Capacity: GN 10x1/3 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Capacity: GN 11x 1/3, 1x 1/9 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at...
%