%
3 Filters ANTI-FAT labyrinths (2x 400x500 & 1x 500x500 mm) Model with built-in centrifugal fan "watertight" (IP55) (central position, in vertical).Designed in stainless steel AISI 441, assembly by points welding.Filters anti-fat has stainless steel labyrinths AISI 430.Peripheral channel for the fat collection, fitted with a drainage tap.Built-in lighting (LED) waterproof (IP65), high temperature.Speed regulator built-in the frontal.
%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Frame in stainless steel, all the parts that are in contact with the dough are also in stainless steel.Adjustement of the thickness from the sheet.Warning device to protect the roller.
%
Made of AISI 441 stainless steel.Heating by electric resistance.Thermostat control.Reinforced shelves.Welded structure.
%
%
Designed in stainless steel.ON / OFF switchShielded steel element heating.Strengthened protection cable for a better security, without affecting the heat distributionWith suspension chains.
%
%
Perforated (back) grate and tank in stainless steel.Lighting on the upper part.3 exhibition shelves (stainless steel) with "price holders" mouldings, adjustable and tiltable trammels.Electronic regulator (digital display).Built-in compressor group, klimaatklasse 3 (T° +25°C & RH 60%).Refrigerant gas R290.Ventilated evaporator (forced air).Exterior made of plasticized steel plate, walls in ABS, mouldings for "trolley" on the front side.On request: night curtain.
%
Perforated (back) grate and tank in stainless steel.Lighting on the upper part.3 exhibition shelves (stainless steel) with "price holders" mouldings, adjustable and tiltable trammels.Electronic regulator (digital display).Built-in compressor group, klimaatklasse 3 (T° +25°C & RH 60%).Refrigerant gas R290.Ventilated evaporator (forced air).Exterior made of plasticized steel plate, walls in ABS, mouldings for "trolley" on the front side.On request: night curtain.
%
Perforated (back) grate and tank in stainless steel.Lighting on the upper part.3 exhibition shelves (stainless steel) with "price holders" mouldings, adjustable and tiltable trammels.Electronic regulator (digital display).Built-in compressor group, klimaatklasse 3 (T° +25°C & RH 60%).Refrigerant gas R290.Ventilated evaporator (forced air).Exterior made of plasticized steel plate, walls in ABS, mouldings for "trolley" on the front side.On request: night curtain.
%
Perforated (back) grate and tank in stainless steel.Lighting on the upper part.3 exhibition shelves (stainless steel) with "price holders" mouldings, adjustable and tiltable trammelsElectronic regulator (digital display).Built-in compressor group, klimaatklasse 3 (T° +25°C & RH 60%).Refrigerant gas R290.Ventilated evaporator (forced air).Exterior made of plasticized steel plate, walls in ABS, mouldings for "trolley" on the front side.On request: night curtain.
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
- Made of stainless steel AISI 441, finishing brushed and polished. - Provided with thermal insulation. - Heating by electrical resistance, with reflector allowing an uniform distribution of heat. - Modulation of heat through an energy regulator, with indicator light. - Standard: 2 side brackets for fixing in "ceiling" version. - Power cord (1500 mm) on the right. - NB Between the food heater and dishes we recommend a distance of 330 mm is necessary.PLUS:- Ideal equipment to keep all your...
%
Capacity: 10x GN1/4, 1x 1/9 h 150 mmSupport strip trays GN 1/9 are delivered standard.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by...
%
Capacity: GN 12x 1/4, 1x 1/9 h150 mm.Support strip trays GN 1/9 standard delivered.NB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting...
%
Capacity: GN 10x1/3 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Capacity: GN 11x 1/3, 1x 1/9 h150 mmSupport strip trays GN 1/9 standard delivered.NB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting...
%
Inside volume: 122 liters.Inside dimensions: 508x355xh720 mm.Load capacity: 161 cans (33 cl.) or 84 bottles (33 cl.).1 swingdoor on hinges, (reversible).Included: 2 grids 498x335 mm.Cooling R600a.Glass door(s), double glazing, "Thermopane"®.Closure by keys.Interior lighting type LED.Included: for each door, 2 adjustable shelves and removable height.Built-in compressor unit climatic class 4 (30°C & 55% HR).Sound level 45 db (A).Electronic regulation, digital display T ° + 2 ° + 10...
%
%
Energy efficiency class : C (Climate Class 4 “room temperature +30C° - relative humidity 55%”).Oversized evaporator.Endowment : 3 grid GN 2/1 (530x650 mm).Refrigerant R290.Counter door with heating element.Standard vacuum valve.Delivered with 4 wheels, 2 with brakes Made of food-grade stainless steel, with AISI 304 interior and AISI 441 exterior (gray treated steel at the back), monocoque frame.Internal embossed side panels.Embossed interior bottom with rounded angles and corners (smooth...
%
Energy efficiency class : C (Climate Class 4 “room temperature +30C° - relative humidity 55%”).Oversized, ventilated evaporator.Endowment : 3 grid GN 2/1 (530x650 mm).Refrigerant R290.Delivered with 4 wheels, 2 with brakes. Made of food-grade stainless steel, with AISI 304 interior and AISI 441 exterior (gray treated steel at the back), monocoque frameInternal embossed side panelsEmbossed interior bottom with rounded angles and corners (smooth surface without roughness).Bottom equipped with a...