%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm, rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin.Manufactured in stainless steel AISI 304 on adjustable feet in PVC.Closed at service side with 2 sliding doors.
%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm, rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin.Manufactured in stainless steel AISI 304 on adjustable feet in PVC.Closed at service side with 2 sliding doors.
%
Production: 10/12 oranges (maximum diameter 70 mm) per minute.Storage capacity: 3 oranges.Loading ramp and recovery tank supplied as standard.Pressure control.Made of "food" materials that do not undergo any alteration in contact with orange juice.Designed for easy maintenance, exterior and interior.Automatic shutdown.
%
Delivery with 1 plates in stainless steel and 1 grill 460x340 (Possibility of also receiving grids or plates of 433x333 mm)Grill salamander (0.7 kW). Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable",...
%
Capacità 3 GN 1/1Top superiore 1,2 mm ed arrotondato verso il basso 50 mm.Tino GN-200 mm, angoli arrotondati, scarico e troppo pieno.Riempimento dell'acqua nel tino manuale.Riscaldamento elettrico per resistenze situate sotto al tino.Regolazione per termostato, t° di 30°C a 90°C.Protezione per termostato di sicurezza.Armadio inferiore aperto lato servizioRealizzazione in acciaio inossidabile AISI 304 salita su piedi regolabili.N.B.: consegnato senza bac gastronorm.
%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm,rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin. Manufactured in stainless steel AISI 304 on adjustable feet in PVC.
%
Production 60 pieces/hour (cooking time 1 minute).Enameled cast-iron plate.Armoured spiral shaped elements made of stainless steel, treated "incoloy".Thermostatic regulation from 0° t0 300°C, control warning light.Standard delivered with wooden scrapper.Stainless steel frame.Equipment is manufactured following the (CE) standards in force.
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
Version to fit in to or to put down.Delivered with 2 pressure bottles, with one tap fit on to 3 exits (easy dosing).Thermostatic control until 90°C, hold temperature = 50°C. (without overheating nor desiccation).Electrical resistance around the stainless steel tray.Electronic timer.
%
Turns/minute: 14000 rpm.Stainless steel cup (900 cl).Shaft with 4 stainless steel knives, ideal for cocktails and sorbets preparation.
%
2 labyrinths filters ANTI GREASE (2x 400x500 mm) Model with built-in centrifugal fan "watertight" (IP55) incorporated (central position, in vertical).Designed in stainless steel AISI 441, assembly by points welding.Filters anti-fat has stainless steel labyrinths AISI 430.Peripheral channel for the fat collection, fitted with a drainage tap.Built-in lighting (LED) waterproof (IP65), high temperature.Speed regulator built-in the frontal.
%
Capacity 40 GN 2/1 levels (or 80x GN 1/1).SPECIAL BANQUETING: Standard 20 grids to optimize space inside the trollley.Up to eight (8) plates with a diameter of 300 mm can be stored per level, for a total of 160 plates. Construction in austenitic stainless steel (food).Walls and door made of double injected prey (high density CFC-free polyurethane).Door opening at 120°, with vertical latch and key lock, with a seal in the door frame, easily replaceable without tools.Hinges with stop at 100°,...
%
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Version with 2 motors.Standard 2 speeds.Turns per minute: 1400/2800 rpm.Tank capacity: 14,5 LtUseful tank capacity: 8,2 LtMade of stainless steel.AISI 304 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and clean.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery"...
%
%
%
Delivery with 1 plates in stainless steel and 1 grill 460x340 (Possibility of also receiving grids or plates of 433x333 mm)Grill salamander (0.7 kW). Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable",...
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
- Specially designed for fast food chains, franchises and any high-volume establishment.- Bottom plate, equipped with an independent selector switch.- Useful dimensions plate: 360x360 mm.- Food enamel plates with high thermal conductivity value. - Easy and easy maintenance, thanks to its juice drawer, 100% smooth surface and scraper, which is delivered as standard. - Smooth lower plate, grooved upper plate, self-balancing with adjustable pressure spring (new concept, more flexible, easy...
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
%
Designed in stainless steel.Independent heating regulation above and underneath.Energy saver system.Height, 76 mm.Thermal appliance thanks to the insulation and the interior fan.Productivity: 13 toasts/minute.Maximal thickness of the toasts: 244x70 mm.Aluminum collection tray for the toasts.
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 6 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R600a, drain for the condensate.Regulation by electronic thermostat (digital), Lighting by "LED". NB Provide discharge (or) a condensate drain pan.