%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm,rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin.Manufactured in stainless steel AISI 304 on adjustable feet in PVC.Closed at service side with 2 sliding doors.
%
Top 1,2 mm with rounding downwards 50 mm.Basin GN-200 mm,rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin.Manufactured in stainless steel AISI 304 on adjustable feet in PVC.
%
- Manufactured in massif wood (dark walnut cod. 4), top shelf, two storage levels underneath.- Peripheral plate posing structure (250 mm), tilting downwards.- Refrigerated surface 1280x600 mm, copper evaporator with pipe system, "Dome" in plexiglas, automatic up-and-down movement.- Frame on swivelling castors.
%
- Air condenser. - Gravity operation- Machine for two flavors and 1 soft ice cream mix.- Gravity feeding of the cylinders.- Cone holder with 3 tubes.- 2 trays: 6 litres.- The storage tanks for the mixture have, for hygiene purposes, the following features perfect, an autonomous refrigeration system.- Hourly production: 13.5 Kg.- Hourly production of 75 gr. cone: 180 pcs.
%
- Air condenser. - Gravity operation- Machine for two flavors and 1 soft ice cream mix.- Gravity feeding of the cylinders.- Cone holder with 3 tubes.- 2 trays: 6 litres.- The storage tanks for the mixture have, for hygiene purposes, the following featuresperfect, an autonomous refrigeration system.- Hourly production: 13.5 Kg.- Hourly production of 75 gr. cone: 180 pcs.
%
Included: 20 pairs of runners (400 x 600 mm).Inner door with heating resistance and under-pressure valve.4 adjustable stainless steel feet.Cooling gas R134.Interior and exterior made of (food) stainless steel AISI 304 (back made of galvanized steel), monocoque frame.Racks and rails in stainless steel (maximal capacity 27 slides, 50-mm spacing), which help to position the trays as one pleases, stamped inside bottom, with drain plug (major maintenance) and rounded angles and corners (without...
%
Version to fit in to or to put down.Delivered with 2 pressure bottles, with one tap fit on to 3 exits (easy dosing).Thermostatic control until 90°C, hold temperature = 50°C. (without overheating nor desiccation).Electrical resistance around the stainless steel tray.Electronic timer.
%
%
2 labyrinths filters ANTI GREASE (2x 400x500 mm) Model with built-in centrifugal fan "watertight" (IP55) incorporated (central position, in vertical).Designed in stainless steel AISI 441, assembly by points welding.Filters anti-fat has stainless steel labyrinths AISI 430.Peripheral channel for the fat collection, fitted with a drainage tap.Built-in lighting (LED) waterproof (IP65), high temperature.Speed regulator built-in the frontal.
%
%
Realization: panoramic window and 2 sides door in plexiglas.Frame in stainless steel, adjustable feet.A built in humidification system gives a continu temperature without dehydration.Heating system: armoured elements in stainless treated "incoloy", thermostatic regulation 0 till 110°C.Show: trough a GN 1/1 plate 25 mm height, illuminated sign delivered with menu sign.
%
Panoramic window and 2 sides door in plexiglas.Frame in stainless steel, adjustable feet.A built in humidification system gives a continu temperature without dehydration.Heating system: armoured elements in stainless treated incoloy, thermostatic regulation 0 till 110°C.Show: trough a GN 1/1 plate 25 mm height, illuminated sign delivered with menu sign.
%
%
Structure support AISI 304 for gastronome tray, maximum depth 150mm.Refrigerated display vat available only on ventilated showcase.Bain-marie and dry heat display vat available only on neutral display case.NB: It is recommended not to put an intermediate shelf.
%
Stainless steel body.Anodized aluminium rollers and rods.Heating surface temperature adjustable by thermostat.Film cutting by means of a low-voltage heated wire.Machine produced in accordance with the actual CE standards.
%
- Turns/minute: rpm 180.- Duration of the production cycle 150-180 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control...
%
%
Production 2400/800 pieces/h.Portions from 50 to 300 gr. "Millimetric" cut check by photocell.Transparant lid with micro-switch.Tank capacity 30 kg, knives and endless screws made of stainless steel.24-V low voltage control panel.Safety micro-switch.Entirely dismountable for an easy maintenance.Outside realization made of "epoxy paint" steel.Delivered with 2 forms CN/45 & CN70, base & pouring funnel for coupling BSL-300A.
%
Production 2400/800 pieces/h.Portions from 50 to 300 gr. "Millimetric" cut check by photocell.Transparant lid with micro-switch.Tank capacity 30 kg, knives and endless screws made of stainless steel.24-V low voltage control panel.Safety micro-switch.Entirely dismountable for an easy maintenance.Outside realization made of "epoxy paint" steel.Delivered with 2 forms CN/45 & CN70, base & pouring funnel for coupling BSL-300A.
%
%
%
Produces 153 kg per 24/hours.Storage in ABS, capacity 55 kg.4 lower regulation cylindersAir condenser. System with helicoidal fillings (continuous production).Evaporator in stainless steel.Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290 .Manufactured in stainless steel AISI 304, adjustable stainless steel feet.The equipment is manufactured following the (CE) standards in force.
%
Produces 153 kg per 24/hours.Storage in ABS, capacity 55 kg.4 lower regulation cylindersWater condenser. System with helicoidal fillings (continuous production).Evaporator in stainless steel.Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290 .Manufactured in stainless steel AISI 304, adjustable stainless steel feet.The equipment is manufactured following the (CE) standards in force.
%
Production 157 kg/24/h. to combine with a storage unit.Continuous production, "worm" system, geared motor with thermal circuit breaker.Stainless steel evaporator.Air condenser (water version on request). System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290 .Manufactured in stainless steel AISI 304.Adjustable stainless steel feet.Machine without reserve to combine with an independent reserve in stainless steel, with...