%
1 chamber: 1240x1260xh180mm.Capacity: 6x 600x400 mm. Stackable oven modules, designed for medium productivity.External construction in AISI 304 stainless steel.The floor of the furnace is made of thermo diffusing steel.Height of the baking vault 180 mm.Ideally suited for baking on platters.Mould made of AISI 430 stainless steel.Heating by shielded resistors on the vault as well as under the floor of the oven.Oven door with stainless steel handle, equipped with a large safety glass.Oura for...
%
Charging height diam. 365 mm (height glasses 325 mm). From 60 to 30 baskets/hour, 2 cycles, 60''-120''.Rotating (Upper and lower) wash and rinse arms.Self cleaning sprinklers.Tank (20 Lit., 2,1 kW) rounded edges, "stamped" bottom.Stamped walls.Stamped double walled doors, removable seal.Removable control panel.Automatic filling of the tank.Check valve.Hot water rinse (water consumption per cycle 2.4 liters), boiler (pressure) in stainless steel (6 Lit., 4.9 kW).Micro switch, when the door...
%
Version with incorporated water softener (ATTENTION: cold water connection).Charging height diam. 365 mm (height glasses 325 mm). From 60 to 30 baskets/hour, 2 cycles, 60''-120''.Rotating wash and rinse arms.Self cleaning sprinklers.Tank (20 Lit., 2,1 kW) rounded edges, "stamped" bottom.Stamped walls.Stamped double walled doors, removable seal.Removable control panel.Automatic filling of the tank.Washing pump 230V/1N 50Hz.Check valve.Hot water rinse (water consumption per cycle 2.4 liters),...
%
Version with incorporated drain pump.Charging height diam. 365 mm (height glasses 325mm). From 60 to 30 baskets/hour, 2 cycles, 60''-120''.Rotating wash and rinse arms.Self cleaning sprinklers.Tank (20 Lit., 2,1 kW) rounded edges, "stamped" bottom.Stamped walls.Stamped double walled doors, removable seal.Removable control panel.Automatic filling of the tank.Washing pump 230V/1N 50Hz.Check valve.Hot water rinse (water consumption per cycle 2.4 liters), boiler (pressure) in stainless steel (6...
%
Height of plates load Ø 365 mm (height glasses 325 mm).From 30 to 20 baskets/hour, PLD cycle 120'', 180'', continuously and ''Sanitisation''.3 phases: wash, unload, rinse.Standard discharge pump.Standard rinse pump (atmospheric boiler). Realization: entirely in stainless steel AISI 304. Rotating washing and rinsing arms (upper and lower) (made of composite material). Self-cleaning nozzles. Tank (20 lt - 2,1 kW) with rounded edges, "deep-drawn" bottom. Stamped basket slides, no roughness and...
%
Continuous water softener, incorporated (ATTENTION: connection to cold water).Height of plates load Ø 365mm (height glasses 325 mm).From 30 to 20 baskets/hour, PLD cycle 120'', 180'', continuously and "Sanitisation".3 phases: wash, unload, rinse.Standard discharge pump.Standard rinse pump (atmospheric boiler). Realization entirely in stainless steel AISI 304. Rotating washing and rinsing arms (upper and lower) (made of composite material). Self-cleaning nozzles. Tank (20 lt - 2,1 kW) with...
%
4 independent square plates (3x 3 kW, 1x 4 kW).Cupboard (GN 2/1) (660x940xh360 mm). Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304.Square cast iron plates, 300x300 mm, with a waterproof edge in stainless steel, safety device in case of overheating. Regulation of the heating power by means of a 7-position switch, frontal accessibility allowing a very easy maintenance.
%
- Dimensions of the basin 240x380xh235 mm.- Oil capacity, min 5,5 lit., max 7 lit.- 1 chromed basket, dimensions 225x325xh90 mm.- Made of 304 stainless steel, deep-drawn "top" thickness 15/10 mm, adjustable cylinders, waterproof "IPX4". - Y-shaped deep-drawn tank with rounded corners, equipped with a cold zone. Made of AISI 304 stainless steel. Drain tap (ball valve). Stainless steel cover as standard. - Electric heating of the "Y" tank, by radiant elements placed under the tank, regulation...
%
Dimensions of the basin 240x380xh235 mm.Oil capacity, min 5,5 lit., max 7 lit.1 chromed basket, dimensions 225x325xh90 mm.Made of 304 stainless steel, deep-drawn "top" thickness 15/10 mm, adjustable cylinders, waterproof "IPX4".Y-shaped deep-drawn tank with rounded corners, equipped with a cold zone. Made of AISI 304 stainless steel. Drain tap (ball valve). Stainless steel cover as standard.Electric heating of the "Y" tank, by radiant elements placed under the tank, regulation from 105°C to...
%
Tank dimensions 730x615xh200 mm, surface area 45 dm2.Motorized tank tilting.Duomat" tank. Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th), large adjustable stainless steel feet, waterproof "IPX5".Water tap for filling the tank.Upper cover of the "deep-drawn" tank, hinges with "torsion spring", gradual closing and opening.Highly thermally conductive tank (Food certified according to European regulation CE n.1935/2004).Electric heating, by stainless steel armoured resistors,...
%
Tank dimensions 730x615xh200 mm, surface area 45 dm2.Motorized tank tilting.Duomat" tank. Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th), large adjustable stainless steel feet, waterproof "IPX5".Water tap for filling the tank.Upper cover of the "deep-drawn" tank, hinges with "torsion spring", gradual closing and opening.Highly thermally conductive tank (Food certified according to European regulation CE n.1935/2004).Electric heating, by stainless steel armoured resistors,...
%
Tank dimensions 730x615xh200 mm, surface area 45 dm2.Tilting of the tank by a manual handwheel.Duomat" tank. Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th), large adjustable stainless steel feet, waterproof "IPX5".Water tap for filling the tank.Upper cover of the "deep-drawn" tank, hinges with "torsion spring", gradual closing and opening.Highly thermally conductive tank (Food certified according to European regulation CE n.1935/2004).Electric heating, by stainless steel...
%
Tank dimensions 730x615xh200 mm, surface area 45 dm2.Tilting of the tank by a manual handwheel.Duomat" tank. Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th), large adjustable stainless steel feet, waterproof "IPX5".Water tap for filling the tank.Upper cover of the "deep-drawn" tank, hinges with "torsion spring", gradual closing and opening.Highly thermally conductive tank (Food certified according to European regulation CE n.1935/2004).Electric heating, by stainless steel...
%
4 independent square plates (3x 3 kW, 1x 4 kW).Open cupboard (GN 2/1) (760x740xh360 mm).Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304.Square cast iron plates, 300x300 mm, with a waterproof edge in stainless steel, safety device in case of overheating. Regulation of the heating power by means of a 7-position switch, frontal accessibility allowing a very easy...
%
Temperature -1° +6° CRefrigerant R600aRoll bond evaporator, ventilated.Automatic defrost, self-evaporating condensate.Supplied with 2 (very sturdy) adjustable grids (493x392 mm). AISI 430 stainless steel exterior, white molded ABS interior.Glass door (Thermopane®), reversible, with aluminum frame, magnetic seal (snap-action), easy replacement without tools, very sturdy handle.LED interior lightKey lock as standardElectronic control, digital displayCFC-free expanded polyurethane insulation (60...
%
Curved anti-thermal glass panel.Interior water basin to catch the cooking fluid, reduce the formation of smoke during the cooking process and avoid dryness of the food.Rotating system with 4 baskets.Thermostat till 300°C.Interior lighting.
%
Capacity: 5x GN1/4 h150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Capacity: 6x GN1/4, 1x GN1/9 h150 mmSupport strip trays GN 1/9 standard delivered.NB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Refrigeration unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting...
%
Capacity: 8x GN1/4 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Capacity: : GN 9x GN1/4 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at will).Electronic...
%
Capacity: GN 4x1/3, 1x1/9 h 150 mm.Support strip trays GN 1/9 are delivered standard.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the...
%
Capacity: GN 6x 1/3 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at will).Electronic...
%
Capacity: GN 7x1/3 mm.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Capacity: GN 8x 1/3, 1x 1/9 h150 mmSupport strip trays GN 1/9 standard delivered .NB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting...