%
1 chamber: 1240x1260xh180mm.Capacity: 6x 600x400 mm. Stackable oven modules, designed for medium productivity.External construction in AISI 304 stainless steel.The floor of the furnace is made of thermo diffusing steel.Height of the baking vault 180 mm.Ideally suited for baking on platters.Mould made of AISI 430 stainless steel.Heating by shielded resistors on the vault as well as under the floor of the oven.Oven door with stainless steel handle, equipped with a large safety glass.Oura for...
%
4 independent square plates (3x 3 kW, 1x 4 kW).Cupboard (GN 2/1) (660x940xh360 mm). Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304.Square cast iron plates, 300x300 mm, with a waterproof edge in stainless steel, safety device in case of overheating. Regulation of the heating power by means of a 7-position switch, frontal accessibility allowing a very easy maintenance.
%
Tank dimensions 730x615xh200 mm, surface area 45 dm2.Motorized tank tilting.Duomat" tank. Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th), large adjustable stainless steel feet, waterproof "IPX5".Water tap for filling the tank.Upper cover of the "deep-drawn" tank, hinges with "torsion spring", gradual closing and opening.Highly thermally conductive tank.Electric heating, by stainless steel armoured resistors, positioned under the tank.Safety device for interrupting operation...
%
Tank dimensions 730x615xh200 mm, surface area 45 dm2.Motorized tank tilting.Duomat" tank. Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th), large adjustable stainless steel feet, waterproof "IPX5".Water tap for filling the tank.Upper cover of the "deep-drawn" tank, hinges with "torsion spring", gradual closing and opening.Highly thermally conductive tank.Electric heating, by stainless steel armoured resistors, positioned under the tank.Safety device for interrupting operation...
%
Tank dimensions 730x615xh200 mm, surface area 45 dm2.Tilting of the tank by a manual handwheel.Duomat" tank. Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th), large adjustable stainless steel feet, waterproof "IPX5".Water tap for filling the tank.Upper cover of the "deep-drawn" tank, hinges with "torsion spring", gradual closing and opening.Highly thermally conductive tank.Electric heating, by stainless steel armoured resistors, positioned under the tank.Safety device for...
%
Tank dimensions 730x615xh200 mm, surface area 45 dm2.Tilting of the tank by a manual handwheel.Duomat" tank. Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th), large adjustable stainless steel feet, waterproof "IPX5".Water tap for filling the tank.Upper cover of the "deep-drawn" tank, hinges with "torsion spring", gradual closing and opening.Highly thermally conductive tank.Electric heating, by stainless steel armoured resistors, positioned under the tank.Safety device for...
%
Cooling capacity 1800 (W/f) for room volume 14,9 m³ / 14900 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a...
%
4 independent square plates (3x 3 kW, 1x 4 kW).Open cupboard (GN 2/1) (760x740xh360 mm).Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304.Square cast iron plates, 300x300 mm, with a waterproof edge in stainless steel, safety device in case of overheating. Regulation of the heating power by means of a 7-position switch, frontal accessibility allowing a very easy...
%
Température -1° +6° CRéfrigérant R600aÉvaporateur de type Roll bond, ventilé.Dégivrage automatique, auto évaporation du condensât.Livré avec 2 grilles (très robustes) (493x392 mm), réglables.Réalisation extérieure en acier inox AISI 430, intérieure blanc en ABS moulé.Porte vitrée (Thermopane®), réversible, avec encadrement en aluminium, fermeture par joint magnétique (à pression) remplacement aisé sans outils, poignée très robuste.Lumière intérieure de type LEDSerrure a clés de...
%
%
Cooling capacity rendered 1881 (W/f) for chamber volume 15,7 m³ / 15700 Lit. (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Ceiling" refrigeration units.All units are supplied as standard with a high pressure switch and KVL valve as well as cables for door and light micro-switches.Separate control panel, connected to the unit by a 5m cable, control of the functions by microprocessor with touch-sensitive keys.Automatic hot gas defrosting with self-evaporation,...
%
Capacity: 5x GN1/4 h150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Capacity: 6x GN1/4, 1x GN1/9 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Refrigeration unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at...
%
Capacity: 8x GN1/4 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Capacity: : GN 9x GN1/4 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at will).Electronic...
%
Capacity: GN 4x1/3, 1x1/9 h 150 mm.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator...
%
Capacity: GN 6x 1/3 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at will).Electronic...
%
Capacity: GN 7x1/3 mm.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Capacity: GN 8x 1/3, 1x 1/9 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at...