%
Production: 10/12 oranges (maximum diameter 70 mm) per minute.Storage capacity: 3 oranges.Loading ramp and recovery tank supplied as standard.Pressure control.Made of "food" materials that do not undergo any alteration in contact with orange juice.Designed for easy maintenance, exterior and interior.Automatic shutdown.
%
Turns/minute: 14000 rpm.Stainless steel cup (900 cl).Shaft with 4 stainless steel knives, ideal for cocktails and sorbets preparation.
%
3 Filters ANTI-FAT labyrinths (2x 400x500 & 1x 500x500 mm) Model with built-in centrifugal fan "watertight" (IP55) (central position, in vertical).Designed in stainless steel AISI 441, assembly by points welding.Filters anti-fat has stainless steel labyrinths AISI 430.Peripheral channel for the fat collection, fitted with a drainage tap.Built-in lighting (LED) waterproof (IP65), high temperature.Speed regulator built-in the frontal.
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Frame in stainless steel, all the parts that are in contact with the dough are also in stainless steel.Adjustement of the thickness from the sheet.Warning device to protect the roller.
%
%
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 6 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R600a, drain for the condensate.Regulation by electronic thermostat (digital), Lighting by "LED". NB Provide discharge (or) a condensate drain pan.
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 8 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R134A, drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Adjustable feet.NB Provide discharge (or) a condensate drain pan.
%
4 plates 300x300 mm, independent (4x 2,5 kW).Oven (5,3 kW) GN 2/1 (560x660xh310 mm). Made of stainless steel AISI 304, stainless steel adjustable feet.Top (15/10 mm) in stainless steel AISI 304.Rear chimney in stainless steel AISI 304.Cooking top, watertight "IPX4".Cast iron plates of high thickness (h.40 mm) "flush", with safety device in case of overheating.Regulation by 7-position switch (each heater), with indicator lamp, front access for easy maintenance.Stainless steel oven, rounded...
%
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Right panel(s) in "toughened glass".Created for bakery, pastry, snack,...Stainless steel exposition plan AISI 304.Without storeroom.Worktop made of AISI 304 stainless steel.Series intermediary glass, with lighting type LED.Note : Plexiglass gates not included.
%
Right panel(s) in "toughened glass".Created for bakery, pastry, snack,...Stainless steel exposition plan AISI 304.Without storeroom.Worktop made of AISI 304 stainless steel.Series intermediary glass, with lighting type LED.Note : Plexiglass gates not included.
%
Energy class: C.Coolant expansion R600a via capillary tube.Internal dimensions: 860x480xh725 mm.Temperature: -14° -24°Supplied with 1 basket. Solid hinged lid with key lock.65 mm CFC-free polyurethane insulation.Mechanical thermostat.Thermometer for internal temperature display.On/off switch.Hermetic unit for ambient temperature up to +32°C, static condenser.Static evaporator located in coil within walls.Manual defrost with front drainage for condensed water.Internal finish in "WAFFLE"...
%
Capacity: 10x GN1/4, 1x 1/9 h 150 mmSupport strip trays GN 1/9 are delivered standard.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by...
%
Capacity: GN 12x 1/4, 1x 1/9 h150 mm.Support strip trays GN 1/9 standard delivered.NB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting...
%
Capacity: GN 10x1/3 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Capacity: GN 11x 1/3, 1x 1/9 h150 mmSupport strip trays GN 1/9 standard delivered.NB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting...
%
%
4 plates 300x300 mm, independent (4x 2,5 kW).Oven (5,3 kW) GN 2/1 (560x660xh310 mm). Made of stainless steel AISI 304, stainless steel adjustable feet.Top (15/10 mm) in stainless steel AISI 304, IPX5 water resistance.Rear chimney in stainless steel AISI 304.Cooking top, watertight "IPX4".Cast iron plates of high thickness (h.40 mm) "flush", with safety device in case of overheating.Regulation by 7-position switch (each heater), with indicator lamp, front access for easy maintenance.Stainless...
%
Energy efficiency class : C (Climate Class 4 “room temperature +30C° - relative humidity 55%”).Endowment : 3 grid GN 2/1 (530x650 mm).Refrigerant R600a.Delivered with 4 wheels, 2 with brakes. Made of food-grade stainless steel, with AISI 304 interior and AISI 441 exterior (gray treated steel at the back), monocoque frame.Internal embossed side panels.Embossed interior bottom with rounded angles and corners (smooth surface without roughness).Bottom equipped with a drain plug for major...