%
Production: 10/12 oranges (maximum diameter 70 mm) per minute.Storage capacity: 3 oranges.Loading ramp and recovery tank supplied as standard.Pressure control.Made of "food" materials that do not undergo any alteration in contact with orange juice.Designed for easy maintenance, exterior and interior.Automatic shutdown.
%
- Coffee storage bin capacity 2 kg.- Dosing from 5 to 12 grams.- Grinder Ø 60 mm.- Duration of continuous use 30 min.- Protection level IP 21.Note: acoustic level (80 dB).
%
3 slices of bread per minute.Adjustable speed.Selection knob (4 functions).Opening of 186xh88 mm.Removable front and back racks.Permanent greasing of motor.Zigzagging warming element.Clean up plate and removable crumb receptacle for better cleaning.
%
Turns/minute: 14000 rpm.Stainless steel cup (900 cl).Shaft with 4 stainless steel knives, ideal for cocktails and sorbets preparation.
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Included: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
Wall-mounted" version with raised rear edgeIncluded: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic...
%
Included: 3 grids (405x460 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
Wall-mounted" version with raised rear edge.Included: 3 grids (405x460 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with...
%
%
Blade length 2400 mm.Height cap. 365 mm.AISI 304 stainless steel waterproof construction.Equipped with meat pusher and portion device.Interlocked waste tray is removable from outside.Removable door and upper pulley for easier cleaning.Aluminum pulleys with sealed ball bearings.Single-phase motors comes with standard thermal protection.Easy unlocking of the upper pulley allows for easier cleaning and blade replacement.Removable PVC scrapers.IP 54 24 V on/off switch with safety microswitch.The...
%
7 pairs of slides EN 600x400 per door provided1 evaporator.4 adjustable stainless steel feet. One-piece structure, back, interior and exterior manufactured in (food) stainless steel.Upper top in stainless steel AISI 304 (removable) thickness (40 mm).Stamped interior bottom, with draining tap (high maintenance), rounded angles (without roughness), (adjustable) stainless steel racks and slides in (L) (65-mm spacing).(Reversible) doors with handle (not visible and not salient), magnetic joint...
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 6 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R600a, drain for the condensate.Regulation by electronic thermostat (digital), Lighting by "LED". NB Provide discharge (or) a condensate drain pan.
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 8 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R134A, drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Adjustable feet.NB Provide discharge (or) a condensate drain pan.
%
Included: 3 grids (560x542 mm).4 adjustable stainless steel feet. Monoblock structure, inside and outside manufactured in stainless steel (food), the back is in galvanized steel.Stamped inside bottom with draining cap (high maintenance), rounded angles and corners (without bumps), racks and slides (anti-swinging) in stainless steel.Reversible doors (provided for key lock) (lock in option), with built-in handles (not salient), magnetic joint (easy replacement, without tools), hinge with...
%
20 pairs of slides EN 600x400 providedVentilated evaporator.4 adjustable stainless steel feet. One-piece structure, interior and exterior manufactured in (food) stainless steel, back in galvanized steel.Stamped interior bottom, with draining tap (high maintenance), rounded angles and corners (without roughness), (adjustable) stainless steel rack and slides in (L) (65-mm spacing).Reversible doors (predisposition for key lock) with handle (not visible and not salient), magnetic joint (easy...
%
20 thermoformed slides EN 600x400 (spacing 65 mm).Temperature + 2 ° + 8 ° C.Refrigerant R600a.Evaporator of the roll bond type, ventilated.Automatic defrost, auto evaporation of condensate.Standard: 5 grids (600x400 mm), adjustable.Monobloc structure, exterior construction in AISI 430 stainless steel, white ABS molded interior, PVC back.Stamped interior bottom, with draining tap (high maintenance), rounded angles and corners.Reversible door with integrated handle (not visible and not...
%
Included: 2 GN grids (325x535 mm), with guides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the rear) of austenitic stainless steel (food-grade), top (40 mm).Interior bottom is embossed, with a large maintenance drain plug, rounded corners (without roughness), stainless steel grids and guides (anti-tilting).Doors with recessed handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at...
%
Wall-mounted" version with raised rear edge.Included: 2 GN grids (325x535 mm), with guides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the rear) of austenitic stainless steel (food-grade), top (40 mm).Interior bottom is embossed, with a large maintenance drain plug, rounded corners (without roughness), stainless steel grids and guides (anti-tilting).Doors with recessed handles (non-protruding), magnetic seal (easy replacement without tools),...
%
Included: 3 grids (325x535 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, interior and exterior (also the back) construction in austenitic stainless steel (food), upper top (40 mm).Stamped inside bottom with draining cap (high maintenance), rounded angles and corners (without bumps), racks and slides (anti-swinging) in stainless steel.Doors, with built-in handles (not salient), magnetic joint (easy replacement, without tools), hinge with automatic return (blocking at...
%
Wall-mounted" version with raised rear edge.Included: 3 grids (325x535 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, interior and exterior (also the back) construction in austenitic stainless steel (food), upper top (40 mm).Stamped inside bottom with draining cap (high maintenance), rounded angles and corners (without bumps), racks and slides (anti-swinging) in stainless steel.Doors, with built-in handles (not salient), magnetic joint (easy replacement, without...
%
Right panel(s) in "toughened glass".Created for bakery, pastry, snack,...Stainless steel exposition plan AISI 304.Without storeroom.Worktop made of AISI 304 stainless steel.Series intermediary glass, with lighting type LED.Note : Plexiglass gates not included.