%
Production: 10/12 oranges (maximum diameter 70 mm) per minute.Storage capacity: 3 oranges.Loading ramp and recovery tank supplied as standard.Pressure control.Made of "food" materials that do not undergo any alteration in contact with orange juice.Designed for easy maintenance, exterior and interior.Automatic shutdown.
%
Turns/minute: 14000 rpm.Stainless steel cup (900 cl).Shaft with 4 stainless steel knives, ideal for cocktails and sorbets preparation.
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
%
Good for small production : 30 kg/hour.Frame in aluminium alloy and stainless steel.Functionning by "cylinder" roll Ø 110 mm, provided with an upper lever (with safety microswitch device),opening 110x65 mm.Gear traction in oil bath.Engine in 1400 Tr / Minutes, equipped with thermal protection, low voltage control (24 V) Protected.
%
Ventilated version, homogeneous distribution of the temperature.Height of the adjustable exposure base, GN containers, bottles, etc...Capacity 4x GN 1/1.Recessed dimensions 1415x690. Deep-drawn tank 115 mm (GN-100 mm trays), rounded corners and corners (perfect hygiene).1/2" drainVentilated cooling by a finned evaporator coupled to a fan, all placed under the tankControl panel with electronic regulation from 0° +4°, digital displayCFC-free expanded polyurethane insulationPredisposed for the...
%
Exterior chassis in "aluminum alloy".The body of the chopper and the inside out leadscrew are also manufactured in treated "aluminum alloy" for food and stainless steel, all the interior parts are easily dismantled allowing easy maintenance.Upper bowl in stainless steel AISI 304.Standard delivered with a 6 mm grid.Grid and blade in stainless steel "auto-sharping".Wheel drive in oil bath.Low voltage control 24V.Aplliances are in compliance with standards (CE) in force.
%
Made of anodized aluminum alloy (food grade) and stainless steel, removable top cover, easy maintenanceVentilated motorTouch-sensitive controls.Optimal product evacuation, thanks to its inclined design, delivered with 2 expeller discs, 1 "top" and 1 "bottom". Continuous power supply, easy to work with, high safety guaranteed by micro switches on the lever and on the upper cover24V low voltage controls, protection class (IP54), NVR (No-Voltage Release) avoiding any involuntary start-up The...
%
2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible (kit is not necessary),...
%
Glass doors with integrated LED-light.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without rougness).Doors with ergonomic handle and reversible...
%
"Wall" model with back board.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
"Wall" model with back board.Glass doors with integrated LED-light.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without rougness).Doors with...
%
Refrigeration unit on the left side.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Sink 340x400x200mm integrated in the work top (right side), delivered with a siphon; drain screen and overflow (NB: tap on request, opening on the work top (27 mm))."Wall" model with turned-up back edge.4 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), per door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides...
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 6 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R600a, drain for the condensate.Regulation by electronic thermostat (digital), Lighting by "LED". NB Provide discharge (or) a condensate drain pan.
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 8 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R134A, drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Adjustable feet.NB Provide discharge (or) a condensate drain pan.
%
Cooling capacity rendered 824 (W/f) for chamber volume 5,0 m³ / 5000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Energy class: D.Included: 3 grids (472x435 mm).4 adjustable stainless steel feet.Refrigerant R290. Made of stainless steel (food-grade), inside AISI 304/441 and outside AISI 441 (rear in treated steel, grey color), monocoque frame.Racks and guides in stainless steel (anti-tipping), allowing to position the grids as desired.Stamped inner bottom and rounded corners and angles (without asperities).Door with ergonomic handle (not protruding) and reversible (predisposition for key lock), closing...
%
Self-service sale.570mm deep. Fits perfectly in small spaces.External construction in plastic sheet metal, ABS sides.Electronic regulator (digital display).AISI 304 stainless steel perforated tank and grid. LED top lighting.3 adjustable exposure shelves (290 mm) (stainless steel). Equipped with "price holder" mouldingsVentilated evaporator (forced air). Double" self-evaporation of condensates, hot gas + electric resistances.Refrigerant gas R290Built-in compressor unit, climatic class 3 (+25°C...
%
Self-service sale.570mm deep. Fits perfectly in small spaces.External construction in plastic sheet metal, ABS sides.Electronic regulator (digital display).AISI 304 stainless steel perforated tank and grid. LED top lighting.3 adjustable exposure shelves (290 mm) (stainless steel). Equipped with "price holder" mouldingsVentilated evaporator (forced air). Double" self-evaporation of condensates, hot gas + electric resistances.Refrigerant gas R290Built-in compressor unit, climatic class 3 (+25°C...
%
Production 75 kg/24 h., capacity reserve 37kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Refrigerant gas R290 Curved "tempered glass" glass panels, tilting downwards.Intermediary glass panel, lighting of the display, TL type.Exterior manufactured in plasticized steel plate, ABS laterall walls, work top in granite, 230V/1 plug.Display in AISI 304 stainless steel.Electronic regulator (digital display), analog thermometer in the display.2 (static) evaporators treated against food acids (or) ventilated evaporator (forced air).Built-in compressor unit, climate class 3 (+25°C & RH...