%
Tank GN 1/3, delivered with 6 specific baskets, numbered.Thermal lateral handles and stainless steel lid.Heatng resistance, except for tank (standard bain-marie).On/Off switch and thermostat from 0 to 100°C, with limiting device.
%
"Thermopane" glass door, with stainless steel frame.Included: 3 grids GN 2/1 (530x650 mm).Inner door with warming elements and depression valve.4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Glass door (double...
%
Stainless steel base AISI 304 18/10.Electric heating, thermostat from 30° to 90°C.
%
Top in stainless steel of 1.5 mm thickness.Multiple spring system.Heating through resistance, adjustable thermostat going form 30°C to 120°C.Submerged control panel, spiral cable 1.5 m.4 swivel castors Ø 125.mm, 2 with brake.Handle and 4 angle shock absorbers, non marking.Manufactured in stainless steel AISI 304, double wall isolation.
%
- Air condenser.- Vertical turbine, ideal for restaurants, requires little maintenance and is very easy to use. - Easy installation due to its compact size. - Minimum mixing capacity 0.5 lit. and maximum 1 lit. - Noise level lower than 70 dB. - Cycle with time control or temperature control. - Vertical evaporator cylinders for a larger exchange surface. - Exclusive distribution device. - System self diagnosis. - Cycle time: 15/20 min. - Hourly production: 5 liters. NB: mainly for cold work.
%
2 compressor groups and 2 evaporators, independent.Included: 2 x 2 grids GN2/1 (530x650 mm).Freezer: inner door fitted with warming resistance, copper coil evaporator, embedded in the walls (3 sides), manual defrost and depression valve, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant gas R290 Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the...
%
- Air condenser.- Vertical turbine with automatic extraction, low maintenance and very easy to use.- Easy installation due to its compact size.- Minimum mixing capacity 1 liter and maximum 2 liters.- Noise level below 70 dB.- Cycle with time control or with temperature control.- Vertical cylinders-evaporators for a bigger surface of exchange.- Exclusive dispensing device.- Auto diagnostic system.- Cycle time: 10/20 min.- Hourly production: 12 liters.NB: mainly for cold work.
%
- Air condenser.- Vertical turbine with automatic extraction, low maintenance and very easy to use.- Easy installation due to its compact size.- Minimum mixing capacity 1 liter and maximum 2 liters.- Noise level below 70 dB.- Cycle with time control or with temperature control.- Vertical cylinders-evaporators for a bigger surface of exchange.- Exclusive dispensing device.- Auto diagnostic system.- Cycle time: 10/20 min.- Hourly production: 12 liters.NB: mainly for cold work.
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Cooling capacity rendered 1960 (W/f) for chamber volume 16,4 m³ / 16400 Lit. (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. "Overlapping" refrigeration units.Unit certified in climatic class 5 (40°C Temperature - 40% Humidity).All units are supplied as standard with a high pressure switch and KVL valve.Automatic hot gas defrost with self-evaporation and overflow.The evaporator drain pipe is equipped with a resistor to prevent ice formation. Refrigerant gas...
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Neutral counter.An intermediate glass.Double LED lighting of the display (under the upper and lower glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work...
%
Neutral counter.LED lighting of the display (under the upper glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work surface.LED lighting of the...
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Superior top 1.5 mm, rounded edges.Plate to keep temperature in vitroceramics.Electric heating by element sited under the tank.Made in stainless steel AISI 304.
%
%
Capacity 40 levels GN 2/1 (or 80x GN 1/1).Standard 10 pair of slides and 10 plasticized grids GN 2/1. Stainless steel austenitic structure (food).Opening door at 120 °, with a vertical lock with a key code.Hinges with stop at 100 °, closing with automatic recall.Built-in compressor unit (ambient T ° 32 ° C)Refrigerant gas R290Ventilated internal evaporator.Integrated control panel, digital display.Electronic controller with automatic defrost.Possibility of use GN 2/1 or GN 1/1, spaced 60...
%
%
%
Stainless steel sheet structure, brushed finishing. Insulated withexpanded polyurethane panels.Insulated top lids opening outwards through 180° to form supportsurfaces, complete with edges to retain condensation.Pressed stainless steel basin without sharp edges, withthermostats, for GN containers up to 20 cm depth (not included).Heated with dry resistance elements underneath each basin.Insulated movement handles.Edge bumper strips in grey non-marking rubber.Castors diam. 16 cm, with two...
%
Structuur in R.V.S platen met een geborstelde afwerking.Geïsoleerd met uitgebreide polyurethaanpanelen.De hoogste deksels openen op 180° om het werkblad te vormen, uitgerust met randen om condensatie te behouden.R.V.S kuipen zonder scherpe randen, met onafhankelijke hermometers en thermostaten, voor de GN-containers tot 20 cmdiepte (niet inbegrepen).Verwarmd met weerstandselementen onder elke kuip.Neutraal lager compartiment, deuren die naar buiten vouwend met scharnieren worden...
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 3 shelves, sliding doors on service side, opened doors on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Internal dimensions 660x420xh825Standard equipment: 1 grid EN 600x4003 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...