%
- Heating surface 910x525mm. - Lower storage cabinet, with 2 sliding doors.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- All around, electric element heating, to block the elements, high productivity and optimal distribution of the heating, regulation by switches (from 50°C till 250°C) - Adjustable flue, easy cleaning.- Insulation of the appliance...
%
Internal dimensions: 380x250xh63mm.Delivered with 3 tongs. Heating by quartz resistors (2 lower, 2 upper).Quartz protection grid (lower and upper).Timer from 0 to 15 minutes, coupled to a control lamp.Extractable bottom bowl.Made in stainless steel AISI 304.Cylinders at the base.Appliances built in compliance with the standards (CE) in force.
%
Supplied as standard with 1 stainless steel plate and 1 grid 460x340 (433x333 mm grids or plates can also be supplied). Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable", removable inner glass for easy...
%
- Heating surface 910x525mm.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- All around, electric element heating, to block the elements, high productivity and optimal distribution of the heating, regulation by switches (from 50°C till 250°C) - Adjustable flue, easy cleaning.- Insulation of the appliance with a 10 mm "alu" plate.- Lower board with 2...
%
Internal dimensions : 2x 380x250xh63 mm.Delivered with 6 tongs. Heating by quartz resistors (2 lower, 2 in the middle and 2 upper).Quartz protection grid.Timer from 0 to 15 minutes, coupled to a control lamp, and selector for use 1 or 2 levels.Extractable bottom bowl.Made in stainless steel AISI 304.Cylinders at the base.Appliances built in compliances with the standards (CE) in force.
%
Delivery with 1 plates in stainless steel and 1 grill 460x340 (Possibility of also receiving grids or plates of 433x333 mm)Grill salamander (0.7 kW). Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable",...
%
- Heating surface 1150x525mm. - Lower storage cabinet, with 2 sliding doors.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- All around, electric element heating, to block the elements, high productivity and optimal distribution of the heating, regulation by switches (from 50°C till 250°C) - Adjustable flue, easy cleaning.- Insulation of the appliance...
%
Independent selection of the 3 quartz ramps with 3 tubes: function toaster or salamander, without pre-heating, high output (400 toasts/hour).2 grids with thermal handles (1 with stainless steel closing).Realization in stainless steel.Floor space 510x320 mm.Heating by infrared "quartz" tubes.Quartz ramp selector, timer 15 min. with continuous position, tensioning warning light, heating warning light.Protection grids of the "quartz" tubes, dismountable (exclusive patent).Removable lower...
%
Delivery with 2 plates in stainless steel and 1 grill EN 600x400 mm. Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable", removable inner glass for easy maintenance.
%
- Heating surface 1150x525mm.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- All around, electric element heating, to block the elements, high productivity and optimal distribution of the heating, regulation by switches (from 50°C till 250°C) - Adjustable flue, easy cleaning.- Insulation of the appliance with a 10 mm "alu" plate.- Lower board with 2...
%
Independent selection of the 2 quartz ramps with 3 tubes: function toaster or salamander, without pre-heating, high output (200 toasts/hour).2 grids with thermal handles.Realization in stainless steel.Floor space 510x320 mm.Heating by infrared "quartz" tubes.Quartz ramp selector, timer 15 min. with continuous position, tensioning warning light, heating warning light.Protection grids of the "quartz" tubes, dismountable (exclusive patent).Removable lower collection tank.Lift-off of the back...
%
Delivered with 1 grid 460x340 mm. 1 turbine "autoreverse". Chamber with rounded corners.Easily removable" gasket on counter door.Easily-removable base plate structure (70 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Micro-switch to stop fan when opening.Electrical heating: stainless steel armored heaters located behind the turbine deflectors.Control...
%
- Heating surface 910x525mm. - Lower storage cabinet, with 2 sliding doors.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- Heating by aligned slit-burners (7 kW), optimal distribution of the heating.- Regulation by gas valves, with a light and a thermoelectric sensor.- Evacuation of the burned gases on 3 sides.- Insulation of the appliance with a 10...
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
- Heating surface 910x525mm.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- Heating by aligned slit-burners (7 kW), optimal distribution of the heating.- Regulation by gas valves, with a light and a thermoelectric sensor.- Evacuation of the burned gases on 3 sides.- Insulation of the appliance with a 10 mm "alu" plate.- Adjustable flue, easy...
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
- Heating surface 1150x525mm. - Lower storage cabinet, with 2 sliding doors.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- Heating by aligned slit-burners (7 kW), optimal distribution of the heating.- Regulation by gas valves, with a light and a thermoelectric sensor.- Evacuation of the burned gases on 3 sides.- Insulation of the appliance with a 10...
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
- Heating surface 1150x525mm.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- Heating by aligned slit-burners (7 kW), optimal distribution of the heating.- Regulation by gas valves, with a light and a thermoelectric sensor.- Evacuation of the burned gases on 3 sides.- Insulation of the appliance with a 10 mm "alu" plate.- Adjustable flue, easy...
%
%
Heating surface 492x412mm. Stainless steel plate (AISI 420), thickness 16mmPeripheral groove with cut-out for grease removal, collection drawer at the front, easy cleaningHeating by electric resistance, covering the whole surface, uniform heat distribution, regulation by switches (from 50°C to 250°C)Insulation of the device, with 10 mm "aluman" plateThese versions are also suitable for flush mounting (on customer's request)Made of stainless steelAppliances in conformity with the norms (CE),...
%
%
- Heating surface 492x412mm- Chromium-nickel- steel plate (AISI 420), thickness 16 mm. - Channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning. - All around, electric element heating, uniform distribution of the heating, regulation by switches (from 50°C till 250°C) - Insulation of the appliance with a 10 mm "alu" plate. - Slot-in models (customer care). - Designed in chromium-nickel-steel.- Appliances are complied with the CE in force. - Fat...
%
- Structure with slides for plates (5 levels) included (600x400 EN or 530x325 GN1/1)- Manufactured in stainless steel (AISI 304)