%
Variable speed (from 35 to 60 movements per minute)Production capacity 5 to 23 kg (40 Lt)Flour capacity 3 to 15 kgTimer supplied as standardTank Ø 425xh295 mmAnalog control panel with low voltage 24 V (IP55).Traction by gears made of nylon (high hardness), very quiet operation.All moving parts are mounted on spherical bearingsEmergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304 stainless steel.Protective plexiglass, with safety...
%
2 speeds (40 to 60 movements per minute)Production capacity 5 to 40 kg (70 Lt)Flour capacity 3 to 25 kgTimer supplied as standardAdjustable right armTank Ø 530xh320 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
%
Variable speed (40 to 60 movements per minute)Production capacity 5 to 40 kg (70 Lt)Flour capacity 3 to 25 kgTimer supplied as standardAdjustable right armTank Ø 530xh320 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
Sold with one gridlle GN 2/31 fan "autoreverse"Inside and outside made off stainless steel AISI 430.Cooking area: fully welded, fully hermetic, rounded edges and angles. - Joint on the inner door, easily removable.Stamped bottom collects the condensate to the waste unit. Plate holder structure, easily removable (75 mm) anti toppling.Heat diffusers easily removable.Evacuation pipe for the condensate.Motors with "autoreverse" turbines (2800 t/mn) guarantee a perfect heat diffusion.Door:...
%
Variable speed (from 35 to 60 movements per minute)Production capacity 5 to 45 kg (65 Lt)Flour capacity 3 to 25 kgTimer supplied as standardTank Ø 500xh340 mmAnalog control panel with low voltage 24 V (IP55).Traction by gears made of nylon (high hardness), very quiet operation.All moving parts are mounted on spherical bearingsEmergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304 stainless steel.Protective plexiglass, with safety...
%
%
Variable speed (35 to 60 movements per minute)Production capacity 5 to 60 kg (92 Lt)Flour capacity 3 to 40 kgTimer supplied as standardAdjustable right armTank Ø 550xh390 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
Delivered with one gridlle GN 1/12 fans "autoreverse"Interior and exterior construction in AISI 430 stainless steel.Cooking chamber: fully welded, fully waterproof, rounded corners and corners.Seal on the counter door, easily removable.Deep-drawn bottom that collects condensation towards the discharge.Easily removable (75 mm) antitipper plate holder structure.Deflectors easily removable.Oura for condensate drainage.Engine(s) with turbines (2800 rpm) "auto-reverse" guarantee a homogeneous heat...
%
2 speeds (Fork: 1st Speed 19 rpm and 2nd Speed 27 rpm) & (Tank: 1st Speed 6 rpm and 2nd Speed 10 rpm)Timer timerSpiral diameter 27 mmDiameter of the tank 580 mm height 230 mm (40 litres) = 35 kg of dough.Comes standard with wheels, 2 of which are equipped with brakes.Optional: scraper in tank, in stainless steel and polyethylene.Analog control panel with low voltage 24V.2-speed motor, gearbox drive (independent tank and fork), self-lubricating, pulley transmission, very quiet...
%
Delivered with one gridlle GN 1/12 fans "autoreverse"Inside and outside made off stainless steel AISI 430.Cooking area: fully welded, fully hermetic, rounded edges and angles. - Joint on the inner door, easily removable.Stamped bottom collects the condensate to the waste unit. Plate holder structure, easily removable (75 mm) anti toppling.Heat diffusers easily removable.Evacuation pipe for the condensate.Motors with "autoreverse" turbines (2800 t/mn) guarantee a perfect heat diffusion.Door:...
%
%
%
2 speeds (Fork: 1st Speed 19 rpm and 2nd Speed 29 rpm) & (Tank: 1st Speed 6 rpm and 2nd Speed 9 rpm)TimerScraper in tank, in stainless steel and polyethylene supplied as standard.Spiral diameter 31 mmDiameter of the tank 660 mm height 330 mm (70 litres) = 60 kg of dough.Comes standard with 2 fixed wheels (nylon) and 2 cylinders at the front.Analog control panel with low voltage 24V.2-speed motor, gearbox drive (independent tank and fork), self-lubricating, pulley transmission, very quiet...
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. (Adjustable) vent valve widely...
%
%
%
Production capacity 100 kg (160 Lt)Flour capacity 66 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 700xh410 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. (Adjustable) vent valve widely...
%
Production capacity 130 kg (200 Lt)Flour capacity 86 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 800xh430 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Oven "CROSSWISE" loading plates GN 2/1 ( or GN 1/1).Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable)...
%
Production capacity 160 kg (250 Lt)Flour capacity 106 kg2 speeds, automatically adjustable (Spiral: 1st Speed 111 rpm and 2nd Speed 223 rpm) & (Tank: 15 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 900xh430 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable) widely sized....
%
Production capacity 200 kg (290 Lt)Flour capacity 133 kg2 speeds, automatically adjustable (Spiral: 1st Speed 111 rpm and 2nd Speed 223 rpm) & (Tank: 15 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 900xh470 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...