%
Capacity bread / hour: 300.Slice thickness: from 9 to 14mm and 16mm.Roll size: 440X300X170mm.Power: 550W.Power supply: TRI.380V (MONO optional).
%
Frame: white color (RAL 9003), other colors on request with added valueBread loading: from the rearCutting width: 450mmSlice thickness: 11 mm as standard (other possible thicknesses: 9 or 13 mm to be specified when ordering, with a lead time of 8 weeks)Maximum height of the loaves: 16 cm - Ball: ø 33 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start by operating the lever"Punch" emergency stop device on the frontPower supply: three-phase 380 volts +...
%
Standard equipment includes 1 GN 2/3 grid.1 "autoreverse" turbine. Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Joint on the inner door, easily removable.Stamped bottom collects the condensate to the waste unit. Plate holder structure, easily removable (70 mm).Heat diffusers easily removable.Evacuation pipe for the condensate.Motors with "autoreverse" turbines (2800 t/mn) guarantee a perfect heat diffusion.Micro-switch stops the fan when the door...
%
Bread capacity / hour: 300.Slice thickness: from 9 to 14mm; 16mm; 12 + 14mm and 14 + 16.Size of the bread: 600X300X170.Power: 550W.Power supply: TRI.380V (MONO optional)
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
%
Bread capacity / hour: 300.Slice thickness: 9-> 14mm / 16mm.Max bread dimension: 440X300X170mm.Motor power: 550W.Voltage: 230 / 400V 3Ph 50Hz.
%
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
CAPACITY: loaves / hour 250 SLICE THICKNESS: 9 -> 14 mm / 16 mm SUN. MAX. BREAD: 440 x 300 x 165 mmMOTOR POWER: 550WVOLTAGE: 400V 3Ph 50Hz / * 230V 1Ph 50Hz (opt.)
%
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
Frame: WHITE RAL N°9003, other colors on request with capital gainBread loading: from aboveCutting width: 450mmSlice thickness: 11 mm as standard (other thicknesses possible: 9 or 13 mm to be specified when ordering, with 8 week lead time)Maximum height of the loaves: 18 cm - Ball: ø 30 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start-up by actuation of the lever"Punch" emergency stop device on the sidePower supply: three-phase 380 volts + neutral + earth...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
- Gas model. - In option : Trolley 15 or 18x 450x650 mm (or) 15 or 18x 500x700 mm, burner (gas or fuel oil) as well as the trolley inside (not delivered with the oven).- Designed for high productivity, double quick to put inside and to take off.- Façade in chromium-nickel-steel AISI 304.- Steel heat exchanger "high productivity", very low energy consumption.- Turning chariot, hanging for the upper chariot.- Cooking chamber, designed in chromium-nickel-steel AISI 304.- Oven door with thermal...
%
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
- Electric model. - In option : Trolley 15 or 18x 450x650 mm (or) 15 or 18x 500x700 mm, as well as the trolley inside (not delivered with the oven).- Designed for high productivity, double quick to put inside and to take off.- Façade in chromium-nickel-steel AISI 304.- Turning trolley, hanging for the upper chariot.- Cooking chamber, designed in chromium-nickel-steel AISI 304.- Oven door with thermal handle, security device and large security glass.- Standard vacuum for the evacuation of the...
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. (Adjustable) vent valve widely...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...