%
- Tablette de découpe en polyéthylène 730x230xh20 mm.- Plan de travail embouti. - Réalisation en acier inox AISI 304/441 en 12/10 mm. - Egouttage avec décharge 1/2'' (Diam 16 mm) , avec double fond perforée. - Munie d'un trou vide ordure. - Structure soudée. Vérins en inox réglables.
%
Degreaser product for professional use, to remove greasy dirt in the kitchen, but especially to polish any polished or satin-finished steel surface like tables, hoods, interiors of refrigeration cells, slicers, trolleys, etc. .; Degreases perfectly and makes the surface shine again.MODALITIES OF USE: Ready to use to spray directly on surfaces to be cleaned and polished. Leave for a few seconds, then wipe with disposable paper.
%
Very solid construction for intensive use.Drawer with thermostatic control.Direct closure drawer.Full opening of the drawer which allows to lift-up the trays, without spilling the food.
Capacity bread / hour: 300.Slice thickness: from 9 to 14mm and 16mm.Roll size: 440X300X170mm.Power: 550W.Power supply: TRI.380V (MONO optional).
%
- Polyethylen tablet 1330x230xh20 mm- Submerged top.- Manufactured in stainless steel AISI 304/441 of 12/10 mm.- Drainage with disharge 1/2" (Diam. 16 mm), with double perforated bottom. - Equipped with a garbage hole. Back border.- Welded structure. Adjustable stainless steel legs.
%
Very solid construction for intensive use.2 drawers with separated thermostatic control.Full opening of the drawers with allows lifting-up the trays, without spilling the food.
Frame: white color (RAL 9003), other colors on request with added valueBread loading: from the rearCutting width: 450mmSlice thickness: 11 mm as standard (other possible thicknesses: 9 or 13 mm to be specified when ordering, with a lead time of 8 weeks)Maximum height of the loaves: 16 cm - Ball: ø 33 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start by operating the lever"Punch" emergency stop device on the frontPower supply: three-phase 380 volts +...
%
- Tank 1070x310xh180 mm, outlet valve and tube. - Polyethylen tablet 730x230xh20 mm.- Submerged top.- Manufactured in stainless steel 18/10 AISI 304/441 of 12/10 mm.- Equipped with a garbage hole.- Welded structure. Adjustable stainless steel legs.
%
Very solid construction for intensive use.3 drawers with separated thermostatic control.Full opening of the drawers with allows lifting-up the trays, without spilling the food.
Bread capacity / hour: 300.Slice thickness: from 9 to 14mm; 16mm; 12 + 14mm and 14 + 16.Size of the bread: 600X300X170.Power: 550W.Power supply: TRI.380V (MONO optional)
%
- Tank 1630x310xh180 mm, outlet valve and tube.- Polyethylen tablet 1330x230xh20 mm.- Submerged top.- Manufactured in stainless steel AISI 304/441 of 12/10 mm.- Equipped with a garbage hole. Back border.- Welded structure. Adjustable stainless steel legs.
Bread capacity / hour: 300.Slice thickness: 9-> 14mm / 16mm.Max bread dimension: 440X300X170mm.Motor power: 550W.Voltage: 230 / 400V 3Ph 50Hz.
CAPACITY: loaves / hour 250 SLICE THICKNESS: 9 -> 14 mm / 16 mm SUN. MAX. BREAD: 440 x 300 x 165 mmMOTOR POWER: 550WVOLTAGE: 400V 3Ph 50Hz / * 230V 1Ph 50Hz (opt.)
Frame: WHITE RAL N°9003, other colors on request with capital gainBread loading: from aboveCutting width: 450mmSlice thickness: 11 mm as standard (other thicknesses possible: 9 or 13 mm to be specified when ordering, with 8 week lead time)Maximum height of the loaves: 18 cm - Ball: ø 30 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start-up by actuation of the lever"Punch" emergency stop device on the sidePower supply: three-phase 380 volts + neutral + earth...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5600 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5800 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...