%
Autonomous working.Manufactured in aluminium and ABS, collecting tray in food PVC.Stainless steel bowl (3 Lit.)Engine (800 rpm) with reduction gearbox (not direct)Lid with safety microswitch device.Control device for the ice thickness.
%
Degreaser product for professional use, to remove greasy dirt in the kitchen, but especially to polish any polished or satin-finished steel surface like tables, hoods, interiors of refrigeration cells, slicers, trolleys, etc. .; Degreases perfectly and makes the surface shine again.MODALITIES OF USE: Ready to use to spray directly on surfaces to be cleaned and polished. Leave for a few seconds, then wipe with disposable paper.
Capacity bread / hour: 300.Slice thickness: from 9 to 14mm and 16mm.Roll size: 440X300X170mm.Power: 550W.Power supply: TRI.380V (MONO optional).
%
Turns/minute: 15000 rpm.On/Off switch, stainless steel screws.. ABS molded body, inner stainless steel and aluminium structure, polished aluminium hopper, 2 liters receiving receptacle en ABS molded.. Fitted with safety microswitch on hopper lever and receiving receptacle, fitted with thermal motor relay.. Sturdy belt-driven transmission, minimal power loss.. The equipment is manufactured following the (CE) standards in force.
Frame: white color (RAL 9003), other colors on request with added valueBread loading: from the rearCutting width: 450mmSlice thickness: 11 mm as standard (other possible thicknesses: 9 or 13 mm to be specified when ordering, with a lead time of 8 weeks)Maximum height of the loaves: 16 cm - Ball: ø 33 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start by operating the lever"Punch" emergency stop device on the frontPower supply: three-phase 380 volts +...
Bread capacity / hour: 300.Slice thickness: from 9 to 14mm; 16mm; 12 + 14mm and 14 + 16.Size of the bread: 600X300X170.Power: 550W.Power supply: TRI.380V (MONO optional)
Bread capacity / hour: 300.Slice thickness: 9-> 14mm / 16mm.Max bread dimension: 440X300X170mm.Motor power: 550W.Voltage: 230 / 400V 3Ph 50Hz.
CAPACITY: loaves / hour 250 SLICE THICKNESS: 9 -> 14 mm / 16 mm SUN. MAX. BREAD: 440 x 300 x 165 mmMOTOR POWER: 550WVOLTAGE: 400V 3Ph 50Hz / * 230V 1Ph 50Hz (opt.)
Frame: WHITE RAL N°9003, other colors on request with capital gainBread loading: from aboveCutting width: 450mmSlice thickness: 11 mm as standard (other thicknesses possible: 9 or 13 mm to be specified when ordering, with 8 week lead time)Maximum height of the loaves: 18 cm - Ball: ø 30 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start-up by actuation of the lever"Punch" emergency stop device on the sidePower supply: three-phase 380 volts + neutral + earth...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5600 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5800 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...