%
- Air condenser.- Vertical turbine, ideal for restaurants, requires little maintenance and is very easy to use. - Easy installation due to its compact size. - Minimum mixing capacity 0.5 lit. and maximum 1 lit. - Noise level lower than 70 dB. - Cycle with time control or temperature control. - Vertical evaporator cylinders for a larger exchange surface. - Exclusive distribution device. - System self diagnosis. - Cycle time: 15/20 min. - Hourly production: 5 liters. NB: mainly for cold work.
%
Capacity 60 plates or max 350 mm.Manufactured in stainless steel. Interior and exterior.Thermostat up to 90° C (double wall).1 swing door.1 intermediate grille.
Capacity bread / hour: 300.Slice thickness: from 9 to 14mm and 16mm.Roll size: 440X300X170mm.Power: 550W.Power supply: TRI.380V (MONO optional).
%
- Air condenser.- Vertical turbine with automatic extraction. - Minimum mixing capacity 2 litres and maximum 4 litres. - Noise level below 70 dB. - Vertical evaporator cylinders for a larger exchange surface. - Cycle with time control or temperature control. - Exclusive distribution device. - System self diagnosis. - Cycle time: 10/15 min. - Hourly production: 20 litres. NB: mainly for cold work, delivered on wheels.
%
- Capacity for 120 plates (diam. 340 mm) or vats GN 2/3 and GN 1/1.- Delivered with 3 adjustable grids: 700x345 mm.- Made of stainless steel, interior and exterior.- Equipped with a thermostat until 130°C, allowing a heart temperature of 65°C. (standards HACCP).- Water reserve for moisture maintenance.- 2 Thermo-ventilators for a perfect heat distribution.- Doors with magnetic closing.- Perfectly mobile, on 4 wheels, 2 with brakes.
Frame: white color (RAL 9003), other colors on request with added valueBread loading: from the rearCutting width: 450mmSlice thickness: 11 mm as standard (other possible thicknesses: 9 or 13 mm to be specified when ordering, with a lead time of 8 weeks)Maximum height of the loaves: 16 cm - Ball: ø 33 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start by operating the lever"Punch" emergency stop device on the frontPower supply: three-phase 380 volts +...
%
%
- Polyvalante for 60 plates (diam. 340 mm) or vats GN 2/3.- Standard 3 grids: 330x345 mm.- Made of stainless steel, interior and exterior.- Equipped with a thermostat until 130°C, allowing a heart temperature of 65°C. (standards HACCP).- Water reserve for moisture maintenance.- Thermo-ventilator for a perfect heat distribution.- Doors with magnetic closing.- Perfectly mobile, on 4 wheels, 2 with brakes.
Bread capacity / hour: 300.Slice thickness: from 9 to 14mm; 16mm; 12 + 14mm and 14 + 16.Size of the bread: 600X300X170.Power: 550W.Power supply: TRI.380V (MONO optional)
%
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 3 lit. and maximum 7 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis.- Cycle time: 8/12 min.- Hourly production: 50 litres.NB: mainly for cold work
Bread capacity / hour: 300.Slice thickness: 9-> 14mm / 16mm.Max bread dimension: 440X300X170mm.Motor power: 550W.Voltage: 230 / 400V 3Ph 50Hz.
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 3 lit. and maximum 7 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis.- Cycle time: 8/12 min.- Hourly production: 50 litres.NB: mainly for cold work.
CAPACITY: loaves / hour 250 SLICE THICKNESS: 9 -> 14 mm / 16 mm SUN. MAX. BREAD: 440 x 300 x 165 mmMOTOR POWER: 550WVOLTAGE: 400V 3Ph 50Hz / * 230V 1Ph 50Hz (opt.)
%
- Water condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 3 lit. and maximum 7 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis.- Cycle time: 8/12 min.- Hourly production: 50 litres.NB: mainly for cold work.
Frame: WHITE RAL N°9003, other colors on request with capital gainBread loading: from aboveCutting width: 450mmSlice thickness: 11 mm as standard (other thicknesses possible: 9 or 13 mm to be specified when ordering, with 8 week lead time)Maximum height of the loaves: 18 cm - Ball: ø 30 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start-up by actuation of the lever"Punch" emergency stop device on the sidePower supply: three-phase 380 volts + neutral + earth...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
Three-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
- Water condenser- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.