%
%
%
%
%
Temperature: +2° +10°Hermetic cool unit (surrounding temperature t° +32°C).Polyuretan insulation without CFC.Serpentine copper evaporator placed inside the walls.Refrigerant gas R600a.Electronic thermostat.Automatic defrosting by hot gas with auto-evaporation.Manufactured in moulded ABS of food quality.Appliances are complied with the CE in force.N.B: delivered without containers.
%
%
Minimum height : 16cmMaximum height : 23cm
%
%
%
%
%
%
%
%
%
Fonctions :Possibility of inserting food having a temperature until 90° C.- Version NNC: 3 cycles personnalisables (software +3°C, hardware +3°C,maintenance), version BCC: 5 cycles personnalisables (software +3 or -18°C, hardware +3 or -18°C, maintenance), specific cycles for the ice cream.- Function CRUISE.- Function CCRT which considers the residual time remaining before the end of the cycle.- Function TURBO CCTC especially conceived for the continuously production.- Sensor with 3 probes...
%
Delivered with stainless steel lidDelivered with standard slides 4x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Fonctions :Possibility of inserting food having a temperature until 90° C.- Version NNC: 3 cycles personnalisables (software +3°C, hardware +3°C,maintenance), version BCC: 5 cycles personnalisables (software +3 or -18°C, hardware +3 or -18°C, maintenance), specific cycles for the ice cream.- Function CRUISE.- Function CCRT which considers the residual time remaining before the end of the cycle.- Function TURBO CCTC especially conceived for the continuously production.- Sensor with 3 probes...
%
Delivered with "toughened" glass on top.Delivered with standard slides 4x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 6x GN1/1 or 5x 600x400mm.Production per cycle: 30Kg (+70° +3°) and 30Kg (+70° -18°).Chamber size: 505x705xh450mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....
%
Capacity: 5x GN1/4 h150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 10x GN1/1 or 8x 600x400mm.Production per cycle: 50Kg (+70° +3°) and 50Kg (+70° -18°).Chamber size: 505x705xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....
%
Delivered with stainless steel lid(s).Standard delivered slides 6x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Cell for loading GN 2/1 (or GN 1/1).Load capacity: 10x GN2/1 or 8x 600x400mm.Production per cycle: 100Kg (+70° +3°) and 70Kg (+70° -18°).Chamber size: 670x843xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness. Deep-drawn bottom that...