%
Exterior chassis in "aluminum alloy".The body of the chopper and the inside out leadscrew are also manufactured in treated "aluminum alloy" for food and stainless steel, all the interior parts are easily dismantled allowing easy maintenance.Upper bowl in stainless steel AISI 304.Standard delivered with a 6 mm grid.Grid and blade in stainless steel "auto-sharping".Cylinder parmesan rasp, with upper lever and the cylinder body made of "aluminum alloy" treated alimentary.Ventilated motor,...
%
2 independent burners 1x2.1 & 1x2.5 KwDesigned for building-in 385x585 mmControl box delivered separately Vitroceramic with infra-red radiant heating zones, quick warming up.Easy maintenance of the cooking surfaceGraduated energy regulator for each heating zone, with indicator lamp.Manufactured in stainless steel AISI 304.
%
%
Aluminum alloy" outer frameThe body of the chopper as well as the internal auger are also made of "aluminium alloy" treated for food and stainless steel, all the internal parts are easily dismantled for an easy maintenance.Upper bowl in stainless steel Aisi 304.Supplied as standard with 6 mm gridSelf-sharpening" stainless steel grid and knifeParmesan grater with cylinder, with upper lever and the body of the cylinder made of food-treated "aluminum alloy".Ventilated motor, ideally designed for...
%
2 independent burners 1x2.1 & 1x2.5 KwDesigned for building-in 385x585 mmControl box delivered separately Vitroceramic with infra-red radiant heating zones, quick warming up.Easy maintenance of the cooking surfaceGraduated energy regulator for each heating zone, with indicator lamp.Manufactured in stainless steel AISI 304.
%
%
Tank : 325x535xh175 mm, GN until 150 mm.Designed for building-in 385x585 mmControl box delivered separatelyNB : delivered without GN container.Tank in stainless steel AISI 304, with one perforated base grill, drainage tap (bullet) put under the machine.Heating by armoured elements made of stainless steel, put under the bottom of the tank, outside.On/Off switch, with indicator lampRegulation from 30° to 90°C, by thermostat.Manufactured in stainless steel AISI 304.NB : delivered without GN...
%
%
Tank 320x370x145 mm (20L).Designed for building-in 385x585 mmControl box delivered separately.NB : baskets A65/CP-C4 not included.Tank in stainless steel AISI 316, resistant to salt corrosion and wear (15/10th), with one overflow pipe for starch and one perforated double base in stainless steel.The drain tap (bullet) is put under the machine.Heating by armoured elements made of stainless steel, put inside the tray.Regulation by a 4-position switch, with indicator lamp.Manufactured in...
%
%
- Tank 320x370x145 mm (20L).- Designed for building-in 385x585 mm - Control box delivered separately.- NB : baskets A65/CP-C4 not included.- Tank in stainless steel AISI 316, resistant to salt corrosion and wear (15/10th), with one overflow pipe for starch and one perforated double base in stainless steel.- The drain tap (bullet) is put under the machine.- Heating by armoured elements made of stainless steel, put inside the tray.- Regulation by a 4-position switch, with indicator lamp.-...
%
%
Tank 620x370x145 mm (40L).Designed for building-in 685x585 mmControl box delivered separately.NB : baskets A65/CP-C4 not included. Tank in stainless steel AISI 316, resistant to salt corrosion and wear (15/10th), with one overflow pipe for starch and one perforated double base in stainless steel.The drain tap (bullet) is put under the machine.Heating by armoured elements made of stainless steel, put inside the tray.Regulation by a 4-position switch, with indicator lamp.Manufactured in...
%
%
Tank 620x370x145 mm (40L).Designed for building-in 685x585 mmControl box delivered separately.NB : baskets A65/CP-C4 not included. Tank in stainless steel AISI 316, resistant to salt corrosion and wear (15/10th), with one overflow pipe for starch and one perforated double base in stainless steel.The drain tap (bullet) is put under the machine.Heating by armoured elements made of stainless steel, put inside the tray.Regulation by a 4-position switch, with indicator lamp.Manufactured in...
%
%
Tank 245x365xh210 mm, min. 9 L, max. 10 LBasket 220x300xh110 mm.Designed for building-in 385x585 mmControl box delivered separately. "Stamped tank" in stainless steel AISI 304, rounded interior corners for a simple and hygienic maintenance, with cold zone, (bullet) outlet tap put under the machine.One grill made of chrome steel wire put inside the basin to retain impurities, stainless steel lid.Heating by armoured elements made of stainless steel, put inside the tank, resistances tumbling...
%
Fonctions :Possibility of inserting food having a temperature until 90° C.- Version NNC: 3 cycles personnalisables (software +3°C, hardware +3°C,maintenance), version BCC: 5 cycles personnalisables (software +3 or -18°C, hardware +3 or -18°C, maintenance), specific cycles for the ice cream.- Function CRUISE.- Function CCRT which considers the residual time remaining before the end of the cycle.- Function TURBO CCTC especially conceived for the continuously production.- Sensor with 3 probes...
%
Tank 245x365xh210 mm, min. 9 L, max. 10 LBasket 220x300xh110 mm.Designed for building-in 385x585 mmControl box delivered separately. "Stamped tank" in stainless steel AISI 304, rounded interior corners for a simple and hygienic maintenance, with cold zone, (bullet) outlet tap put under the machine.One grill made of chrome steel wire put inside the basin to retain impurities, stainless steel lid.Heating by armoured elements made of stainless steel, put inside the tank, resistances tumbling...
%
Fonctions :Possibility of inserting food having a temperature until 90° C.- Version NNC: 3 cycles personnalisables (software +3°C, hardware +3°C,maintenance), version BCC: 5 cycles personnalisables (software +3 or -18°C, hardware +3 or -18°C, maintenance), specific cycles for the ice cream.- Function CRUISE.- Function CCRT which considers the residual time remaining before the end of the cycle.- Function TURBO CCTC especially conceived for the continuously production.- Sensor with 3 probes...
%
Hard chromium plate "50 µm".Cooking surface 395x520 mm, 20.5 dm2.Designed for building-in 385x585 mmControl box delivered separately. Cast iron plate with high heat conductibility, with one peripheral welded edge, guaranteeing a perfect watertightness.Drip tray for cooking juice (100x500xh 57 mm = 2.8 Lit) under the machine.Heating by armoured elements made of stainless steel, put under the plate.Regulation from 120° to 320°C by thermostat, with indicator lamp.Manufactured in stainless steel...
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 6x GN1/1 or 5x 600x400mm.Production per cycle: 30Kg (+70° +3°) and 30Kg (+70° -18°).Chamber size: 505x705xh450mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....
%
Hard chromium plate "50 µm".Cooking surface 395x520 mm, 20.5 dm2.Designed for building-in 385x585 mmControl box delivered separately. Cast iron plate with high heat conductibility, with one peripheral welded edge, guaranteeing a perfect watertightness.Drip tray for cooking juice (100x500xh 57 mm = 2.8 Lit) under the machine.Heating by armoured elements made of stainless steel, put under the plate.Regulation from 120° to 320°C by thermostat, with indicator lamp.Manufactured in stainless steel...
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 10x GN1/1 or 8x 600x400mm.Production per cycle: 50Kg (+70° +3°) and 50Kg (+70° -18°).Chamber size: 505x705xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....