%
%
%
%
Casing in 18/10 stainless steel, cast iron plate, with groove at the bottom and at the top, very short preheating time, a cleanliness drawer and large juice collector, the left and right plates are individually switched on with thermostats and indicator light. separate control
%
- Specially designed for fast food chains, franchises and any high-volume establishment.- Bottom plate, equipped with an independent selector switch.- Useful dimensions plate: 360x360 mm.- Food enamel plates with high thermal conductivity value. - Easy and easy maintenance, thanks to its juice drawer, 100% smooth surface and scraper, which is delivered as standard. - Smooth lower plate, grooved upper plate, self-balancing with adjustable pressure spring (new concept, more flexible, easy...
%
%
- Double model to alternate all types of cooking.- Useful dimensions plate: 535x240 mm.- Food enamel plates with high thermal conductivity value. - Easy and easy maintenance, thanks to its juice drawer, 100% smooth surface and scraper, which is delivered as standard. - Smooth lower plate, grooved upper plate, self-balancing with adjustable pressure spring (new concept, more flexible, easy regulation!) and equipped with an all-stainless steel handle (very robust). - Heating by means of "coloy"...
%
%
- Model specifically designed for panini cooking.- Useful dimensions plate: 360x240 mm.- Food enamel plates with high thermal conductivity value. - Easy and easy maintenance, thanks to its juice drawer, 100% smooth surface and scraper, which is delivered as standard. - Smooth lower plate, grooved upper plate, self-balancing with adjustable pressure spring (new concept, more flexible, easy regulation!) and equipped with an all-stainless steel handle (very robust). - Heating by means of "coloy"...
%
%
Cast-iron plate, necessary measurements 365x255 mm.Stabilizing system in the upper plate, in order to keep the upper plate always in a horizontal position.Thermostat regulation up to 250°.
%
%
Plate in cast iron with ally for food, useful dimensions 225x255 mm.Stabilizing system in the top plate, allowing a constant horizontal position.Top plate handle in heatproof material.Heating resistances, situated under the cast iron plate.Regulation through thermostat till 250°C, together with a warning light.Structure in AISI 304 stainless steel.Adjustable lower legs.The equipment is manufactured following the (CE) standards in force
%
%
Plate in cast iron, useful dimensions 550x255 mm.Stabilizing system in the top plate, allowing a constant horizontal position.Regulation through thermostat till 250°C.
%
Fonctions :Possibility of inserting food having a temperature until 90° C.- Version NNC: 3 cycles personnalisables (software +3°C, hardware +3°C,maintenance), version BCC: 5 cycles personnalisables (software +3 or -18°C, hardware +3 or -18°C, maintenance), specific cycles for the ice cream.- Function CRUISE.- Function CCRT which considers the residual time remaining before the end of the cycle.- Function TURBO CCTC especially conceived for the continuously production.- Sensor with 3 probes...
%
Upper plate gridlled, underplate flat all in vitroceramic.Easy maintenance working surface : 558 x 250 mm.Reception tub for liquids in front.Fitted with balanced springs on upper partRegulation thermostat till 250°C (from 20 till 200° in 4 min. till 300°C in 6 min). Low energy consumption.Chassis in stainless AISI 304.
%
Fonctions :Possibility of inserting food having a temperature until 90° C.- Version NNC: 3 cycles personnalisables (software +3°C, hardware +3°C,maintenance), version BCC: 5 cycles personnalisables (software +3 or -18°C, hardware +3 or -18°C, maintenance), specific cycles for the ice cream.- Function CRUISE.- Function CCRT which considers the residual time remaining before the end of the cycle.- Function TURBO CCTC especially conceived for the continuously production.- Sensor with 3 probes...
%
Upper plate gridlled, underplate flat all in vitroceramic.Easy maintenance working surface : 370x250 mm.Reception tub for liquids in front.Fitted with balanced springs on upper partRegulation thermostat till 300°C (from 20 till 200° in 4 min. till 300°C in 6 min). Low energy consumption.Frame in stainless AISI 304.
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 6x GN1/1 or 5x 600x400mm.Production per cycle: 30Kg (+70° +3°) and 30Kg (+70° -18°).Chamber size: 505x705xh450mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 10x GN1/1 or 8x 600x400mm.Production per cycle: 50Kg (+70° +3°) and 50Kg (+70° -18°).Chamber size: 505x705xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....
%
Cell for loading GN 2/1 (or GN 1/1).Load capacity: 10x GN2/1 or 8x 600x400mm.Production per cycle: 100Kg (+70° +3°) and 70Kg (+70° -18°).Chamber size: 670x843xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness. Deep-drawn bottom that...
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 20x GN1/1 or 16x 600x400mm.Production per cycle: 100Kg (+70° +3°) and 85Kg (+70° -18°).Chamber size: 525x705xh1453mm.Core probe.Compressor unit not included.Trolley & charger 600x400 EURONORM (on request ref: AC/2P2...)NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick,...
%
Cell for loading plates GN 2/1 (or GN 1/1).Load capacity: 20x GN2/1 or 16x 600x400mm.Production per cycle: 200Kg (+70° +3°) and 170Kg (+70° -18°).Chamber size: 780x946xh1850mm.Cell delivered disassembled.Core probe.Compressor unit not included.Trolley & charger 600x400 EURONORM (on request ref: AC/2P2...)NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm...