%
Variable speed (from 35 to 60 movements per minute)Production capacity 5 to 23 kg (40 Lt)Flour capacity 3 to 15 kgTimer supplied as standardTank Ø 425xh295 mmAnalog control panel with low voltage 24 V (IP55).Traction by gears made of nylon (high hardness), very quiet operation.All moving parts are mounted on spherical bearingsEmergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304 stainless steel.Protective plexiglass, with safety...
%
Included: 20 pairs of runners (400 x 600 mm).Inner door with heating resistance and under-pressure valve.4 adjustable stainless steel feet.Cooling gas R134.Interior and exterior made of (food) stainless steel AISI 304 (back made of galvanized steel), monocoque frame.Racks and rails in stainless steel (maximal capacity 27 slides, 50-mm spacing), which help to position the trays as one pleases, stamped inside bottom, with drain plug (major maintenance) and rounded angles and corners (without...
Heat sealer for stainless steel trays with locking, 2 CLTP cavities Manual heat sealer delivered with double cavity tooling for 192x138 and 138x96 trays.sealing effortlessly thanks to the mechanical system.Advantages:guarantees perfect sealing of packaging thanks to its simple mechanical locking.
%
2 speeds (40 to 60 movements per minute)Production capacity 5 to 40 kg (70 Lt)Flour capacity 3 to 25 kgTimer supplied as standardAdjustable right armTank Ø 530xh320 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
Included: 20 pairs of runners (600 x 800 mm).Inner door with heating resistance and under-pressure valve.4 adjustable stainless steel feet.Cooling gas R134.Interior and exterior made of (food) stainless steel AISI 304 (back made of galvanized steel), monocoque frame.Racks and rails in stainless steel (maximal capacity 27 slides, 50-mm spacing), which help to position the trays as one pleases, stamped inside bottom, with drain plug (major maintenance) and rounded angles and corners (without...
Simultaneous cutting and sealing of the film Sealing capacity: 195x160 mm Small and large format adjustable die Maximum reel width: 160 mm Electronic temperature regulation Maximum coil diameter: 200 mm Aluminum welding plate with Power supply: 230 V single phase + Earth non-stick teflon coating Power: 400 W Polished food grade stainless steel Weight: 8 kg...
%
Variable speed (40 to 60 movements per minute)Production capacity 5 to 40 kg (70 Lt)Flour capacity 3 to 25 kgTimer supplied as standardAdjustable right armTank Ø 530xh320 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
Included: 20 pairs of runners (400 x 600 mm).4 adjustable stainless steel feet.Cooling gas R134.Interior and exterior made of (food) stainless steel AISI 304 (back made of galvanized steel), monocoque frame.Racks and rails in stainless steel (maximal capacity 27 slides, 50-mm spacing), which help to position the trays as one pleases, stamped inside bottom, with drain plug (major maintenance) and rounded angles and corners (without bumps).Doors with ergonomic (not projecting) and reversible...
%
Variable speed (from 35 to 60 movements per minute)Production capacity 5 to 45 kg (65 Lt)Flour capacity 3 to 25 kgTimer supplied as standardTank Ø 500xh340 mmAnalog control panel with low voltage 24 V (IP55).Traction by gears made of nylon (high hardness), very quiet operation.All moving parts are mounted on spherical bearingsEmergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304 stainless steel.Protective plexiglass, with safety...
%
Included: 20 pairs of runners (600 x 800 mm).4 adjustable stainless steel feet.Cooling gas R134.Interior and exterior made of (food) stainless steel AISI 304 (back made of galvanized steel), monocoque frame.Racks and rails in stainless steel (maximal capacity 27 slides, 50-mm spacing), which help to position the trays as one pleases, stamped inside bottom, with drain plug (major maintenance) and rounded angles and corners (without bumps).Doors with ergonomic (not projecting) and reversible...
%
%
Variable speed (35 to 60 movements per minute)Production capacity 5 to 60 kg (92 Lt)Flour capacity 3 to 40 kgTimer supplied as standardAdjustable right armTank Ø 550xh390 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
Removable, adjustable and reinforced intermediate shelf.Made of AISI 441 stainless steel (brushed finish).
%
%
2 speeds (Fork: 1st Speed 19 rpm and 2nd Speed 27 rpm) & (Tank: 1st Speed 6 rpm and 2nd Speed 10 rpm)Timer timerSpiral diameter 27 mmDiameter of the tank 580 mm height 230 mm (40 litres) = 35 kg of dough.Comes standard with wheels, 2 of which are equipped with brakes.Optional: scraper in tank, in stainless steel and polyethylene.Analog control panel with low voltage 24V.2-speed motor, gearbox drive (independent tank and fork), self-lubricating, pulley transmission, very quiet...
%
Strengthened intermediary shelf, removable and adjustable.Manufactured in stainless steel 18/10 AISI 304 (brushed finish).
%
%
Strengthened intermediary shelf, removable and adjustable.Manufactured in stainless steel AISI 304 (Type "Scotch Brite" finish).
%
2 speeds (Fork: 1st Speed 19 rpm and 2nd Speed 29 rpm) & (Tank: 1st Speed 6 rpm and 2nd Speed 9 rpm)TimerScraper in tank, in stainless steel and polyethylene supplied as standard.Spiral diameter 31 mmDiameter of the tank 660 mm height 330 mm (70 litres) = 60 kg of dough.Comes standard with 2 fixed wheels (nylon) and 2 cylinders at the front.Analog control panel with low voltage 24V.2-speed motor, gearbox drive (independent tank and fork), self-lubricating, pulley transmission, very quiet...
%
Removable, adjustable and reinforced intermediate shelf.Made of AISI 441 stainless steel (brushed finish).
%
%
Strengthened intermediary shelf, removable and adjustable.Manufactured in stainless steel 18/10 AISI 304 (brushed finish).