%
Made of chromed steel.Flow : 26 liters/min.Gooseneck tap Ø 20 mm.Output one hole 3/4" (Ø 29 mm).
%
Finishing and general protection product for use on satin-finished, metal, wood, laminated, plastic, etc. surfaces. Evaporates quickly, does not attract dirt and leaves a film of lubricant and gloss. Frequent use avoids the formation of halos and spots.MODALITIES OF USE: It is advisable to use BRILL-SS with vaporizer, directly on the surfaces to be treated, pass with dry paper or with a clean cloth and rub until complete absorption.
%
Decarbonizing and highly degreasing detergent for professional use to remove cooking grease or carbonized deposits cooked by: ovens, plates, grills, rotisseries, deep fryers, plates of cooking, etc.MODALITIES OF USE: Possibly heat the surfaces to 30-40 ° C, spray and distribute the product on all the walls; Let stand for a few minutes, then pass with a damp sponge. If the dirt has been there for some time, let it act a little longer and remove with a spatula. It can also be used cold as long...
%
%
%
Mixer with big flow : 40 liters/min.Gooseneck tap Ø 25 mm.Output one hole 3/4" (Ø 29 mm).
%
Washing detergent for steam or convection, self-cleaning ovens.MODALITIES OF USE: the product is dosed automatically through the special programming of the oven.
%
%
Rinsing product, suitable for self-cleaning ovens as a neutralizer for residual alkalinity after rinsing.MODALITIES OF USE AND DOSES: the product is automatically dosed thanks to the special programming of the oven.
%
Mixer with big flow: 35 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 115 mm.Flexible 1200-mm length.Flow of the nozzle 16 liters/min.
%
Polishing disinfectant detergent, slightly perfumed, formulated for the cleaning and maintenance of stainless steel surfaces, to make them shine again.MODALITIES OF USE: Pour POLI-SS onto a damp sponge and pass over the surface to be cleaned, rinse well and wring with a clean cloth until it shines.
%
%
Degreaser product for professional use, to remove greasy dirt in the kitchen, but especially to polish any polished or satin-finished steel surface like tables, hoods, interiors of refrigeration cells, slicers, trolleys, etc. .; Degreases perfectly and makes the surface shine again.MODALITIES OF USE: Ready to use to spray directly on surfaces to be cleaned and polished. Leave for a few seconds, then wipe with disposable paper.
%
%
Universal degreasing and disinfecting detergent for professional use that eliminates all types of dirt on all surfaces in the kitchen; UNIV-SG is safe for users (Law 81/08 Ex 626) and effective for cleaning food contact equipment (HACCP).The formula is particularly rich, allows a very high dilution of the product whereas the absence of the mentions of danger on the label make the handling simple and safe.UNIV-SG is suitable for cleaning work surfaces, tiles, hoods and filters, refrigerator...
%
Mixer with big flow: 30 lit./min.Swan neck tap Ø 20 mm.Sprinkler length 1000 mm, wall attachment.Faucet flow 10 lit./min.Output one hole attachment (Ø 35 mm).
%
%
Made of chromed steel.Flow rate (pressure 3 bar) tap 38 litres/minute.Gooseneck Ø 20 mm.Single hole outlet Ø min.27/max.35, thread length 80 mm, hoses G 1/2 femaleMaximum pressure 6.5 bar and maximum temperature 65°C
%
%
%
%
Flow rate (pressure 3 bar) hand shower 16 litres/minute.Non-return valve as standard (standard EN 1717 Belgaqua.)Wall bracket 150 mm1200 mm hand shower hose (DVGW standards).Single hole outlet Ø min.27/max.35, thread length 80 mm, hoses G 1/2 femaleMaximum pressure 6.5 bar and maximum temperature 65°C bar.
%
Flow rate (pressure 3 bar) tap 45 litres/minute, hand shower 16 litres/minute.Non-return valve as standard (standard EN 1717 Belgaqua.)Wall bracket 150 mmGooseneck Ø 25 mm (L.250mm).Hand shower hose 1050 mm (DVGW standards).Single hole outlet Ø min.27/max.35, thread length 80 mm, hoses G 1/2 femaleMaximum pressure 6.5 bar and maximum temperature 65°C bar.
%
Gooseneck Ø 25 mm.Single hole outlet Ø min.27/max.35, thread length 80 mm, hoses G 3/4 femaleFlow rate (pressure 3 bar) tap 50 litres/minute.Placed on a 300 mm stainless steel column.Maximum pressure 6.5 bar and maximum temperature 65°C