%
2 independent burners 1x2.1 & 1x2.5 KwDesigned for building-in 385x585 mmControl box delivered separately Vitroceramic with infra-red radiant heating zones, quick warming up.Easy maintenance of the cooking surfaceGraduated energy regulator for each heating zone, with indicator lamp.Manufactured in stainless steel AISI 304.
%
2 independent burners 1x2.1 & 1x2.5 KwDesigned for building-in 385x585 mmControl box delivered separately Vitroceramic with infra-red radiant heating zones, quick warming up.Easy maintenance of the cooking surfaceGraduated energy regulator for each heating zone, with indicator lamp.Manufactured in stainless steel AISI 304.
%
%
Tank : 325x535xh175 mm, GN until 150 mm.Designed for building-in 385x585 mmControl box delivered separatelyNB : delivered without GN container.Tank in stainless steel AISI 304, with one perforated base grill, drainage tap (bullet) put under the machine.Heating by armoured elements made of stainless steel, put under the bottom of the tank, outside.On/Off switch, with indicator lampRegulation from 30° to 90°C, by thermostat.Manufactured in stainless steel AISI 304.NB : delivered without GN...
%
Sold with one gridlle GN 2/31 fan "autoreverse"Inside and outside made off stainless steel AISI 430.Cooking area: fully welded, fully hermetic, rounded edges and angles. - Joint on the inner door, easily removable.Stamped bottom collects the condensate to the waste unit. Plate holder structure, easily removable (75 mm) anti toppling.Heat diffusers easily removable.Evacuation pipe for the condensate.Motors with "autoreverse" turbines (2800 t/mn) guarantee a perfect heat diffusion.Door:...
%
Tank 320x370x145 mm (20L).Designed for building-in 385x585 mmControl box delivered separately.NB : baskets A65/CP-C4 not included.Tank in stainless steel AISI 316, resistant to salt corrosion and wear (15/10th), with one overflow pipe for starch and one perforated double base in stainless steel.The drain tap (bullet) is put under the machine.Heating by armoured elements made of stainless steel, put inside the tray.Regulation by a 4-position switch, with indicator lamp.Manufactured in...
%
%
- Tank 320x370x145 mm (20L).- Designed for building-in 385x585 mm - Control box delivered separately.- NB : baskets A65/CP-C4 not included.- Tank in stainless steel AISI 316, resistant to salt corrosion and wear (15/10th), with one overflow pipe for starch and one perforated double base in stainless steel.- The drain tap (bullet) is put under the machine.- Heating by armoured elements made of stainless steel, put inside the tray.- Regulation by a 4-position switch, with indicator lamp.-...
%
Tank 620x370x145 mm (40L).Designed for building-in 685x585 mmControl box delivered separately.NB : baskets A65/CP-C4 not included. Tank in stainless steel AISI 316, resistant to salt corrosion and wear (15/10th), with one overflow pipe for starch and one perforated double base in stainless steel.The drain tap (bullet) is put under the machine.Heating by armoured elements made of stainless steel, put inside the tray.Regulation by a 4-position switch, with indicator lamp.Manufactured in...
%
Delivered with one gridlle GN 1/12 fans "autoreverse"Inside and outside made off stainless steel AISI 430.Cooking area: fully welded, fully hermetic, rounded edges and angles. - Joint on the inner door, easily removable.Stamped bottom collects the condensate to the waste unit. Plate holder structure, easily removable (75 mm) anti toppling.Heat diffusers easily removable.Evacuation pipe for the condensate.Motors with "autoreverse" turbines (2800 t/mn) guarantee a perfect heat diffusion.Door:...
%
Tank 620x370x145 mm (40L).Designed for building-in 685x585 mmControl box delivered separately.NB : baskets A65/CP-C4 not included. Tank in stainless steel AISI 316, resistant to salt corrosion and wear (15/10th), with one overflow pipe for starch and one perforated double base in stainless steel.The drain tap (bullet) is put under the machine.Heating by armoured elements made of stainless steel, put inside the tray.Regulation by a 4-position switch, with indicator lamp.Manufactured in...
%
%
Tank 245x365xh210 mm, min. 9 L, max. 10 LBasket 220x300xh110 mm.Designed for building-in 385x585 mmControl box delivered separately. "Stamped tank" in stainless steel AISI 304, rounded interior corners for a simple and hygienic maintenance, with cold zone, (bullet) outlet tap put under the machine.One grill made of chrome steel wire put inside the basin to retain impurities, stainless steel lid.Heating by armoured elements made of stainless steel, put inside the tank, resistances tumbling...
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. (Adjustable) vent valve widely...
%
Tank 245x365xh210 mm, min. 9 L, max. 10 LBasket 220x300xh110 mm.Designed for building-in 385x585 mmControl box delivered separately. "Stamped tank" in stainless steel AISI 304, rounded interior corners for a simple and hygienic maintenance, with cold zone, (bullet) outlet tap put under the machine.One grill made of chrome steel wire put inside the basin to retain impurities, stainless steel lid.Heating by armoured elements made of stainless steel, put inside the tank, resistances tumbling...
%
%
Hard chromium plate "50 µm".Cooking surface 395x520 mm, 20.5 dm2.Designed for building-in 385x585 mmControl box delivered separately. Cast iron plate with high heat conductibility, with one peripheral welded edge, guaranteeing a perfect watertightness.Drip tray for cooking juice (100x500xh 57 mm = 2.8 Lit) under the machine.Heating by armoured elements made of stainless steel, put under the plate.Regulation from 120° to 320°C by thermostat, with indicator lamp.Manufactured in stainless steel...
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. (Adjustable) vent valve widely...
%
Hard chromium plate "50 µm".Cooking surface 395x520 mm, 20.5 dm2.Designed for building-in 385x585 mmControl box delivered separately. Cast iron plate with high heat conductibility, with one peripheral welded edge, guaranteeing a perfect watertightness.Drip tray for cooking juice (100x500xh 57 mm = 2.8 Lit) under the machine.Heating by armoured elements made of stainless steel, put under the plate.Regulation from 120° to 320°C by thermostat, with indicator lamp.Manufactured in stainless steel...
%
Oven "CROSSWISE" loading plates GN 2/1 ( or GN 1/1).Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable)...
%
Hard chromium plate "50 µm".Cooking surface 695x520 mm, 36.1 dm2.Designed for building-in 385x585 mmControl box delivered separately. Cast iron plate with high heat conductibility, with one peripheral welded edge, guaranteeing a perfect watertightness.Drip tray for cooking juice (100x500xh 57 mm = 2.8 Lit) under the machine.Heating by elements made of stainless steel, put under the plate.Regulation from 120° to 320°C by thermostat, with indicator lamp.Manufactured in stainless steel AISI 304.
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. Oura (not adjustable) widely sized....
%
Hard chromium plate "50 µm".Cooking surface 695x520 mm, 36.1 dm2.Designed for building-in 385x585 mmControl box delivered separately. Cast iron plate with high heat conductibility, with one peripheral welded edge, guaranteeing a perfect watertightness.Drip tray for cooking juice (100x500xh 57 mm = 2.8 Lit) under the machine.Heating by elements made of stainless steel, put under the plate.Regulation from 120° to 320°C by thermostat, with indicator lamp.Manufactured in stainless steel AISI 304.
%
Oven "CROSSWISE" loading plates GN 2/1 ( or GN 1/1).Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. (Adjustable) vent...