%
Bottom mirror (enhances the presented products_backup_1_1)Basement for the storage of plates and cutlery.Posterns in brushed stainless steel, roof made from hardened glass , LED illumination Service shelf made of stainless steel, one of each side (folding shelves), easy passage, standard doors (0.8 m). Heating by 2 armoured resistances in vats of stainless steel. Expanded polyurethane insulation, CFC-free. Drain for the water in the tank system. Electronic controller (digital).
Interesting to buy, perfect in performanceMeet basic needsWith the gas fryer, there is no electrical connection requiredCold and deep zoneDurbale temperature sensorSupplied with two baskets and a lidHeight adjustable feetAvailable in natural gas or propane*standard with Millivolt regulator Yield: 40kg / hour
%
%
Bottom mirror (enhances the presented products_backup_1_1)Basement for the storage of plates and cutlery.Posterns in brushed stainless steel, roof made from hardened glass , LED illumination Service shelf made of stainless steel, one of each side (folding shelves), easy passage, standard doors (0.8 m). Heating by 2 armoured resistances in vats of stainless steel. Expanded polyurethane insulation, CFC-free. Drain for the water in the tank system. Electronic controller (digital).NB: delivered...
%
- Useful capacity of the tank (+/- 8,5 liters).- Basket dimensions 220x190xh110 mm.- Designed in stainless steel.- Frontal drainage tap, fitted with a safety device. - Stainless steel baskets ("strengthened") with thermal handle. - Shielded element heating "treated" and immersed in the tank. - Cold area: no carbonization of the wastes, no taste transmission. - On/Off switch, thermostat from 0°C to 180°C, safety thermostat as well, wires of the bulbs fitted with a protection. - Easy cleaning:...
%
Standard equipment includes 1 GN 2/3 grid.1 "autoreverse" turbine. Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Joint on the inner door, easily removable.Stamped bottom collects the condensate to the waste unit. Plate holder structure, easily removable (70 mm).Heat diffusers easily removable.Evacuation pipe for the condensate.Motors with "autoreverse" turbines (2800 t/mn) guarantee a perfect heat diffusion.Micro-switch stops the fan when the door...
%
Bottom mirror (enhances the presented products_backup_1_1)Basement for the storage of plates and cutlery.Posterns in brushed stainless steel, roof made from hardened glass , LED illumination Service shelf made of stainless steel, one of each side (folding shelves), easy passage, standard doors (0.8 m). Heating by 2 armoured resistances in vats of stainless steel. Expanded polyurethane insulation, CFC-free. Drain for the water in the tank system. Electronic controller (digital). NB: delivered...
%
- Useful capacity of the tank (+/- 8,5 liters)- Basket dimensions 220x190xh110 mm.- Designed in stainless steel, fitted with 2 lateral and thermal handles. - Stainless steel tank AISI 304, fitted with a lid.- Frontal drainage tap, fitted with a safety device.- Stainless steel baskets ("strengthened") with thermal handle.- Shielded element heating "treated" and immersed in the tank. - Cold area: no carbonization of the wastes, no taste transmission.- On/Off switch, thermostat from 0° to 180°C,...
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
%
Bottom mirror (give more importance to the presented products_backup_1_1)Basement for the storage of plates and cutlery.Posterns in brushed stainless steelRoof made from hardened glass , LED illuminationBar service in stainless steel, one of each side (fold-down shelves)Easy passage, standard doors (0.8 m) Built-in compressor group, climate class 4 (30 ° C & 55% HR).Evaporator "coil" type in the stainless steel tank.Ecological refrigerant R290 (without CFC).Expanded polyurethane...
%
- Useful (+/- 3,5 liters). - Basket 120x220xh110 mm.- Made of stainless steel, 2 athermic handles, with cover. - Stainless steel basket (very robust "reinforced"), athermic handle. - Stainless steel tank AISI 304, equipped with cover. - Heating by "treated" shielded resistance heating, immersed in tank. - Cold zone: no carbonization of food waste. - Thermostat from 0°C to 180°C, as well as a safety thermostat (bulb wires with protection). - Easy maintenance: removable control box (equipped...
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
%
Bottom mirror (give more importance to the presented products_backup_1_1)Basement for the storage of plates and cutlery.Posterns in brushed stainless steelRoof made from hardened glass , LED illuminationBar service in stainless steel, one of each side (fold-down shelves), easy passage, standard doors (0.8 m)Built-in compressor group, climate class 4 (30 ° C & 55% HR).Evaporator "coil" type in the stainless steel tank.Ecological refrigerant R290 (without CFC).Expanded polyurethane...
%
- Useful capacity of the tanks (+/- 6.5 liters).- Basket dimensions 220x190xh110 mm.- Designed in stainless steel, fitted with 2 lateral and thermal handles. - Stainless steel baskets ("strengthened") with thermal handle.- Stainless steel tank AISI 304, fitted with a lid.- Shielded element heating "treated" and immersed in the tank.- Cold area: no carbonization of the wastes, no taste transmission.-Thermostat from 0° to 180°C, safety thermostat as well, wires of the bulbs fitted with a...
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
%
Bottom mirror (give more importance to the presented products_backup_1_1)Basement for the storage of plates and cutlery.Posterns in brushed stainless steelRoof made from hardened glass , LED illuminationBar service in stainless steel, one of each side (fold-down shelves) - easy passage, standard doors (0.8 m)Built-in compressor group, climate class 4 (30 ° C & 55% HR).Evaporator "coil" type in the stainless steel tank.Ecological refrigerant R290 (without CFC).Expanded polyurethane...
%
%
- Useful capacity of the tanks (+/- 6.5 liters).- Basket dimensions 220x190xh110 mm.- Designed in stainless steel, fitted with 2 lateral and thermal handles. - Stainless steel baskets ("strengthened") with thermal handle.- Stainless steel tank AISI 304, fitted with a lid.- Shielded element heating "treated" and immersed in the tank.- Cold area: no carbonization of the wastes, no taste transmission.-Thermostat from 0° to 180°C, safety thermostat as well, wires of the bulbs fitted with a...
%
%
- Standard with electric switch.- Useful capacity of the tank (+/- 7 liters).- Basket dimensions 220x190xh110mm.- Designed in stainless steel, fitted with 2 lateral and thermal handles. - Stainless steel baskets ("strengthened") with thermal handle.- Stainless steel tank AISI 304, fitted with a lid.- Drain tap, equipped with a safety device. - Shielded element heating "treated" and immersed in the tank.- Cold area: no carbonization of the wastes, no taste transmission.-Thermostat from 0° to...
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. (Adjustable) vent valve widely...
%
- Standard with electric switch.- Useful capacity of the tank (+/- 7 liters).- Basket dimensions 220x190xh110mm.- Designed in stainless steel, fitted with 2 lateral and thermal handles. - Stainless steel baskets ("strengthened") with thermal handle.- Stainless steel tank AISI 304, fitted with a lid.- Drain tap, equipped with a safety device. - Shielded element heating "treated" and immersed in the tank.- Cold area: no carbonization of the wastes, no taste transmission.-Thermostat from 0° to...
%