Capacity bread / hour: 300.Slice thickness: from 9 to 14mm and 16mm.Roll size: 440X300X170mm.Power: 550W.Power supply: TRI.380V (MONO optional).
Very easy to use and control citrus juicer. You just have to place half of the fruit and lower the lever to start the mechanism.
%
- Manufactured in stainless steel AISI 441. - 3 drawers for the plates 600x400.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
Frame: white color (RAL 9003), other colors on request with added valueBread loading: from the rearCutting width: 450mmSlice thickness: 11 mm as standard (other possible thicknesses: 9 or 13 mm to be specified when ordering, with a lead time of 8 weeks)Maximum height of the loaves: 16 cm - Ball: ø 33 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start by operating the lever"Punch" emergency stop device on the frontPower supply: three-phase 380 volts +...
Sliding doors3 adjustable shelves Adjustable feet
%
AISI 304L stainless steelTank same as LMASWSupplied with 2 jerry cans of 13 liters clean water / dirty waterWorks with a foot operated pumpEquipped with 2 wheels at the back for easy movementThe "Plus product"Ideal for rooms without water supply,Travel,Event operations (fairs, etc.)
Bread capacity / hour: 300.Slice thickness: from 9 to 14mm; 16mm; 12 + 14mm and 14 + 16.Size of the bread: 600X300X170.Power: 550W.Power supply: TRI.380V (MONO optional)
%
- Manufactured in stainless steel AISI 441.- 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
The free-standing non-heated washbasin is also availablewith its optional hygiene kit including:• an AISI 304L stainless steel backsplash - W460 x D30 x H620 mm• an automatic soap dispenser (ref. LMDSAVA page 151)• a paper dispenser (ref. LMDESSI page 150)• a plastic bin (ref. LMPBP page 150)
Bread capacity / hour: 300.Slice thickness: 9-> 14mm / 16mm.Max bread dimension: 440X300X170mm.Motor power: 550W.Voltage: 230 / 400V 3Ph 50Hz.
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
AISI 304L stainless steelEquipped with a 3.7kW electric instantaneous water heater2 jerry cans of 13 L ensuring the supply of cold water and the evacuation of waste waterA suitable power socket (2.5 mm² cable) can produce water at 45°C in a few seconds, adjustable via an easily accessible mixer tap.Consumes electricity only when the tap is turned on under the action of the pedalAlso equipped with a soap dispenser (ref. LMDSAV) for cleaning, a space for a hand towel roll for hygienic hand...
CAPACITY: loaves / hour 250 SLICE THICKNESS: 9 -> 14 mm / 16 mm SUN. MAX. BREAD: 440 x 300 x 165 mmMOTOR POWER: 550WVOLTAGE: 400V 3Ph 50Hz / * 230V 1Ph 50Hz (opt.)
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
Frame: WHITE RAL N°9003, other colors on request with capital gainBread loading: from aboveCutting width: 450mmSlice thickness: 11 mm as standard (other thicknesses possible: 9 or 13 mm to be specified when ordering, with 8 week lead time)Maximum height of the loaves: 18 cm - Ball: ø 30 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start-up by actuation of the lever"Punch" emergency stop device on the sidePower supply: three-phase 380 volts + neutral + earth...
All AISI 304L stainless steelAdjustable gooseneck faucet, operated by foot pedalEC/EF pre-mixer 1/2" 15x21Check valveIntegrated trash can
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
- Manufactured in stainless steel AISI 441. - Top : in stainless steel 15/10, reinforced by a stainless steel sheet on the bottom.- Modules: 3 drawers for the shelves 600x400, plates structures 6 slide levels 600x400.- Hopper: capacity 125 lit., lid + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
AISI 304L stainless steelWithout backsplash, with drain and siphonRectangular deep-drawn tank of 1140 x 320 x 165 mmEquipped with 2 electronically controlled mixer taps - 6V lithium battery (CR-P2)Operating pressure: 1 to 5 barFlow rate: 3 l/min by integrated flow limiterEC/EF connection in 3/8" (12-17)
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
- Manufactured in stainless steel AISI 441. - Top : in stainless steel 15/10, reinforced by a stainless steel sheet on the bottom.- Cupboards: 2 isolated sliding doors with double wall , adjustable intermediate shelf.- Modules: 3 drawers for the shelves 600x400, plates structures 6 slide levels 600x400.- Hopper: capacity 125 lit., lid + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000,...
AISI 304L stainless steelWithout backsplash, with drain and siphoRectangular deep-drawn tank of 1140 x 320 x 165 mmEquipped with 2 goosenecks, EC/EF premixer (x2)1/2" EC/EF connectionNon-return valve (Provide 2 EC/EF water inlets)
%
Three-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...