%
Capacity 60 plates or max 350 mm.Manufactured in stainless steel. Interior and exterior.Thermostat up to 90° C (double wall).1 swing door.1 intermediate grille.
Capacity bread / hour: 300.Slice thickness: from 9 to 14mm and 16mm.Roll size: 440X300X170mm.Power: 550W.Power supply: TRI.380V (MONO optional).
Very easy to use and control citrus juicer. You just have to place half of the fruit and lower the lever to start the mechanism.
%
- Manufactured in stainless steel AISI 441. - 3 drawers for the plates 600x400.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Capacity for 120 plates (diam. 340 mm) or vats GN 2/3 and GN 1/1.- Delivered with 3 adjustable grids: 700x345 mm.- Made of stainless steel, interior and exterior.- Equipped with a thermostat until 130°C, allowing a heart temperature of 65°C. (standards HACCP).- Water reserve for moisture maintenance.- 2 Thermo-ventilators for a perfect heat distribution.- Doors with magnetic closing.- Perfectly mobile, on 4 wheels, 2 with brakes.
Frame: white color (RAL 9003), other colors on request with added valueBread loading: from the rearCutting width: 450mmSlice thickness: 11 mm as standard (other possible thicknesses: 9 or 13 mm to be specified when ordering, with a lead time of 8 weeks)Maximum height of the loaves: 16 cm - Ball: ø 33 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start by operating the lever"Punch" emergency stop device on the frontPower supply: three-phase 380 volts +...
%
%
- Polyvalante for 60 plates (diam. 340 mm) or vats GN 2/3.- Standard 3 grids: 330x345 mm.- Made of stainless steel, interior and exterior.- Equipped with a thermostat until 130°C, allowing a heart temperature of 65°C. (standards HACCP).- Water reserve for moisture maintenance.- Thermo-ventilator for a perfect heat distribution.- Doors with magnetic closing.- Perfectly mobile, on 4 wheels, 2 with brakes.
Bread capacity / hour: 300.Slice thickness: from 9 to 14mm; 16mm; 12 + 14mm and 14 + 16.Size of the bread: 600X300X170.Power: 550W.Power supply: TRI.380V (MONO optional)
%
%
- Manufactured in stainless steel AISI 441.- 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
Bread capacity / hour: 300.Slice thickness: 9-> 14mm / 16mm.Max bread dimension: 440X300X170mm.Motor power: 550W.Voltage: 230 / 400V 3Ph 50Hz.
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
CAPACITY: loaves / hour 250 SLICE THICKNESS: 9 -> 14 mm / 16 mm SUN. MAX. BREAD: 440 x 300 x 165 mmMOTOR POWER: 550WVOLTAGE: 400V 3Ph 50Hz / * 230V 1Ph 50Hz (opt.)
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
Frame: WHITE RAL N°9003, other colors on request with capital gainBread loading: from aboveCutting width: 450mmSlice thickness: 11 mm as standard (other thicknesses possible: 9 or 13 mm to be specified when ordering, with 8 week lead time)Maximum height of the loaves: 18 cm - Ball: ø 30 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start-up by actuation of the lever"Punch" emergency stop device on the sidePower supply: three-phase 380 volts + neutral + earth...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
- Manufactured in stainless steel AISI 441. - Top : in stainless steel 15/10, reinforced by a stainless steel sheet on the bottom.- Modules: 3 drawers for the shelves 600x400, plates structures 6 slide levels 600x400.- Hopper: capacity 125 lit., lid + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
- Manufactured in stainless steel AISI 441. - Top : in stainless steel 15/10, reinforced by a stainless steel sheet on the bottom.- Cupboards: 2 isolated sliding doors with double wall , adjustable intermediate shelf.- Modules: 3 drawers for the shelves 600x400, plates structures 6 slide levels 600x400.- Hopper: capacity 125 lit., lid + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000,...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
- Manufactured in stainless steel AISI 441. - Top : in stainless steel 15/10, reinforced by a stainless steel sheet on the bottom.- Cupboards: 2 isolated sliding doors with double wall , adjustable intermediate shelf.- Modules: 3 drawers for the shelves 600x400, plates structures 6 slide levels 600x400.- Hopper: capacity 125 lit., lid + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000,...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
- Vervaardigd uit RVS. AISI 441- Structuur voor Dienbladen 600x400, 6niveaus