%
Finishing and general protection product for use on satin-finished, metal, wood, laminated, plastic, etc. surfaces. Evaporates quickly, does not attract dirt and leaves a film of lubricant and gloss. Frequent use avoids the formation of halos and spots.MODALITIES OF USE: It is advisable to use BRILL-SS with vaporizer, directly on the surfaces to be treated, pass with dry paper or with a clean cloth and rub until complete absorption.
%
Exceptional cut for large volumes of cooked and cold meats (not suitable for cheese). The food cart is mounted on ball bearings for a smooth sliding action. Thickness control with the button on the side. Belt operation.
%
Decarbonizing and highly degreasing detergent for professional use to remove cooking grease or carbonized deposits cooked by: ovens, plates, grills, rotisseries, deep fryers, plates of cooking, etc.MODALITIES OF USE: Possibly heat the surfaces to 30-40 ° C, spray and distribute the product on all the walls; Let stand for a few minutes, then pass with a damp sponge. If the dirt has been there for some time, let it act a little longer and remove with a spatula. It can also be used cold as long...
%
%
%
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 190x250 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
%
Washing detergent for steam or convection, self-cleaning ovens.MODALITIES OF USE: the product is dosed automatically through the special programming of the oven.
%
"Dry" gear transmission system.Blade in stainless steel, anti-stick.Manufactured in anodised aluminium, automatic sharpener.Cutting capacity 200x150 mm, adjustable cutting distance 0-15 mm.
%
Rinsing product, suitable for self-cleaning ovens as a neutralizer for residual alkalinity after rinsing.MODALITIES OF USE AND DOSES: the product is automatically dosed thanks to the special programming of the oven.
%
%
Polishing disinfectant detergent, slightly perfumed, formulated for the cleaning and maintenance of stainless steel surfaces, to make them shine again.MODALITIES OF USE: Pour POLI-SS onto a damp sponge and pass over the surface to be cleaned, rinse well and wring with a clean cloth until it shines.
%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Degreaser product for professional use, to remove greasy dirt in the kitchen, but especially to polish any polished or satin-finished steel surface like tables, hoods, interiors of refrigeration cells, slicers, trolleys, etc. .; Degreases perfectly and makes the surface shine again.MODALITIES OF USE: Ready to use to spray directly on surfaces to be cleaned and polished. Leave for a few seconds, then wipe with disposable paper.
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Universal degreasing and disinfecting detergent for professional use that eliminates all types of dirt on all surfaces in the kitchen; UNIV-SG is safe for users (Law 81/08 Ex 626) and effective for cleaning food contact equipment (HACCP).The formula is particularly rich, allows a very high dilution of the product whereas the absence of the mentions of danger on the label make the handling simple and safe.UNIV-SG is suitable for cleaning work surfaces, tiles, hoods and filters, refrigerator...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
%
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 200x260 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
%
%
Realisation in anodized aluminium, base in stainless steel.Automatic or manual cutting.Programmation of the cutting from 10 to 50 slices or continuous.Blade in stainless steel AISI 304, automatic sharpening.Blade protection easy to remove.Cut capacity 245x300 mm, cut adjustment from 0 to15 mm, trajectory of carriage 330 mm, plate 270x260 mm.Low tension control 24 V.Belt drive.
%
Realisation in anodized aluminium, base in stainless steel.Automatic or manual cutting.Programmation of the cutting from 10 to 50 slices or continuous.Blade in stainless steel AISI 304, automatic sharpening.Blade protection easy to remove.Cut capacity 245x300 mm, cut adjustment from 0 to15 mm, trajectory of carriage 330 mm, plate 270x260 mm.Low tension control 24 V.Belt drive.
%
For each and every product such as ham, sausage, raw meat, cheese.Automatic carriage motion with variable speed control (it can be used manually as well).Independent controls for carriage motion and blade.Exclusive designed carriage with a special end weight and an adjustable vertical product fence to provide stability and advance products evenly.Stainless steel base.Oblique blade, 35° inclination (a blade extractor comes standard).Max. cutting capacity: 270xh230 (Ø 255 mm), slice thickness:...