%
- Structures with slides for plates (2x8 levels) included, double row (600x400 EN or 530x325 GN1/1) - 2 glass doors- Structure for plates (74 mm), removable- Door in tempered glass (6 mm) with stainless steel handle- Heating through stainless steel armoured resistances- Adjustable slides- GN vat inside (on the bottom), tu put water and to humidify the cupboard- On/off switch- Mechanical thermosat (30° to 60°C) with pilot light- Manufactured in stainless steel- Adjustable stainless steel feet-...
%
Countertop automatic pasta cooker with steam extractor hood. The solution for those who do not have or cannot install a smoke extractor.1 portion of pasta in 1 minutePasta cooker, 300 portions of pasta per hour! The real Italian pasta, always "al dente" can now be served in only 76 cm of space, WITHOUT SPECIALIZED LABOR, and fully automatically, with a new model of pasta cooker "Voglia di Pasta" P2001 / 4.The pasta cooker which in just 76 cm of space will allow you to prepare 300 pasta per hour
%
- Structures with slides for plates (2x6 levels) included, double row (600x400 EN or 530x325 GN1/1) - 2 glass doors- Structure for plates (74 mm), removable- Door in tempered glass (6 mm) with stainless steel handle- Heating through stainless steel armoured resistances- Adjustable slides- GN vat inside (on the bottom), tu put water and to humidify the cupboard- On/off switch- Mechanical thermosat (30° to 60°C) with pilot light- Manufactured in stainless steel- Adjustable stainless steel feet-...
%
- Stainless steel 18/10- 4 baskets of 1 liter each included- Integrated vapor recovery tank- Temperature regulation: 30 ° - 120 ° C- Cooking time per basket adjustable by an audible signal- Tank capacity: 8 liters- Water connection R1 / 2 ”- Water inlet at the press of a button- Adjustable feet: 15 mm
%
2 rear edges raised Made of stainless steel AISI 441.Soundproof and reinforced worktop.Reinforced lower shelf.Welded structure.Adjustable stainless steel jacks.
%
- Structures with slides for plates (8 levels) included, double row (600x400 EN ou 530x325 GN1/1) - 2 glass doors- Structure for plates (74 mm), removable- Door in tempered glass (6 mm) with stainless steel handle- Heating through stainless steel armoured resistances- Adjustable slides- GN vat inside (on the bottom), tu put water and to humidify the cupboard- On/off switch- Mechanical thermosat (30° to 60°C) with pilot light- Manufactured in stainless steel- Adjustable stainless steel feet-...
%
%
2 rear edges raised Made of stainless steel AISI 441.Soundproof and reinforced worktop.Reinforced lower shelf.Welded structure.Adjustable stainless steel jacks.
%
- Structures with slides for plates (8 levels) included (460x340 or 433x333 or 353x325 GN2/3) - Glass door- Structure for plates (74 mm), removable- Door in tempered glass (6 mm) with stainless steel handle- Heating through stainless steel armoured resistances- Adjustable slides- GN vat inside (on the bottom), tu put water and to humidify the cupboard- On/off switch- Mechanical thermosat (30° to 60°C) with pilot light- Manufactured in stainless steel- Adjustable stainless steel feet-...
%
%
Structures with slides for plates (8 levels) included, double row (600x400 EN ou 530x325 GN1/1)2 glass doors Structure for plates (74 mm), removable.Door in tempered glass (6 mm) with stainless steel handleHeating through stainless steel armoured resistancesAdjustable slidesGN vat inside (on the bottom), to put water and to humidify the cupboardOn/off switchMechanical thermosat (30° to 60°C) with pilot lightManufactured in stainless steelAdjustable stainless steel feetEquipment manufactured...
%
%
Structures with slides for plates (8 levels) included (460x340 or 433x333 or 353x325 GN2/3)Glass door Structure for plates (74 mm), removableDoor in tempered glass (6 mm) with stainless steel handleHeating through stainless steel armoured resistancesAdjustable slidesGN vat inside (on the bottom), tu put water and to humidify the cupboardOn/off switchMechanical thermosat (30° to 60°C) with pilot lightManufactured in stainless steelAdjustable stainless steel feetEquipment manufactured following...
%
%
%
Fonctions :Possibility of inserting food having a temperature until 90° C.- Version NNC: 3 cycles personnalisables (software +3°C, hardware +3°C,maintenance), version BCC: 5 cycles personnalisables (software +3 or -18°C, hardware +3 or -18°C, maintenance), specific cycles for the ice cream.- Function CRUISE.- Function CCRT which considers the residual time remaining before the end of the cycle.- Function TURBO CCTC especially conceived for the continuously production.- Sensor with 3 probes...
%
Fonctions :Possibility of inserting food having a temperature until 90° C.- Version NNC: 3 cycles personnalisables (software +3°C, hardware +3°C,maintenance), version BCC: 5 cycles personnalisables (software +3 or -18°C, hardware +3 or -18°C, maintenance), specific cycles for the ice cream.- Function CRUISE.- Function CCRT which considers the residual time remaining before the end of the cycle.- Function TURBO CCTC especially conceived for the continuously production.- Sensor with 3 probes...
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 6x GN1/1 or 5x 600x400mm.Production per cycle: 30Kg (+70° +3°) and 30Kg (+70° -18°).Chamber size: 505x705xh450mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 10x GN1/1 or 8x 600x400mm.Production per cycle: 50Kg (+70° +3°) and 50Kg (+70° -18°).Chamber size: 505x705xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....
%
Cell for loading GN 2/1 (or GN 1/1).Load capacity: 10x GN2/1 or 8x 600x400mm.Production per cycle: 100Kg (+70° +3°) and 70Kg (+70° -18°).Chamber size: 670x843xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness. Deep-drawn bottom that...
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 20x GN1/1 or 16x 600x400mm.Production per cycle: 100Kg (+70° +3°) and 85Kg (+70° -18°).Chamber size: 525x705xh1453mm.Core probe.Compressor unit not included.Trolley & charger 600x400 EURONORM (on request ref: AC/2P2...)NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick,...
%
Cell for loading plates GN 2/1 (or GN 1/1).Load capacity: 20x GN2/1 or 16x 600x400mm.Production per cycle: 200Kg (+70° +3°) and 170Kg (+70° -18°).Chamber size: 780x946xh1850mm.Cell delivered disassembled.Core probe.Compressor unit not included.Trolley & charger 600x400 EURONORM (on request ref: AC/2P2...)NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm...