%
Production 3600/1000 pieces/hour.Round portions 20 to 300 gr.Outside realization made of steel "epoxy painting".Lid with micro switch.Endless screw made in food aluminium.24 V low voltage control panel.Emergency stop switch.Dismountable for an easier mantenance.2 back wheels for an easyer transport.
%
In addition to the qualities already known from Kenwood mixers, such as their planetary movement and longevity there are a few characteristics: very powerful 1700W motor, brilliantly polished stainless steel tank, transparent protective cover with filling hole, electronic speed control, perfect elevation system with high position, maximum protection against overloading, 1.6L glass mixer.
%
Stainless steel / plastic version, 8cm opening, with separate pulp drain in the large plastic container, equipped with rubber feet that prevent leakage and vibrations, easy to clean, all parts that come into contact with the food are there 'stainless steel, safety and lock lever for opening and closing the centrifuge. Opening 8 cm.
%
Production 3600/800 pieces/hour.Round portions 20 to 1000 gr.Outside realization made of stainless steel.Lid with micro switch.Endless screw made in food aluminium.24V low voltage control panel.Emergency stop switch.Dismountable for an easier mantenance.4 wheels of witch 2 with brakes, easyer transport.
%
Undercarriage and feet in "alloy" stable and robustmanufacturing (coulour grey).Removable stainless steel bowl.Capacity 10 L.Possibility to make the bowl go up and down through a special lever,foreseen for this effect, also fitted with a security swith toswitch of the mixer when the bowl is down.Protection grid in stainless steel on top of the bowl, when themachine is working, one can shut it down through a micro switch.Control at low power 24 V.3 speeds (low, medium and high).Driven by oiled...
%
Stainless steel / plastic version, opening 7cm, with separate pulp drain in the large plastic container, equipped with rubber feet that prevent leakage and vibrations, easy to clean, all parts that come into contact with the food are there 'stainless steel, safety and lock lever for opening and closing the centrifuge. Opening 7cm.
%
Production per hour: 20 Lit/h.Chassis in stainless steel and "aluminium alloy".Disk and filter basket in stainless steel and nylon, all the parts in contact with the food are removable. easy cleaning.Orifice 65 mm x 40 mm, pusher in PVC.Ventilated motor, 3000/6000 Turns/Minutes. Thermico.Waste collector basket (Ø180 mm, h= 270 mm).Switch On/Off, micro-switch security device.The equipment is manufactured following the (CE) standards in force
%
%
Undercarriage and feet in "alloy" stable and robustmanufacturing (coulour grey).Removable stainless steel bowl.Capacity 20 L.Possibility to make the bowl go up and down through a special lever, foreseen for this effect, also fitted with a security swith to switch of the mixer when the bowl is down.Protection grid in stainless steel on top of the bowl, when the machine is working, one can shut it down through a micro switch.Control at low power 24 V.3 speeds (low, medium and high).Driven by...
%
- Multipurpose machine featuring the: citrus juicer P501/B, T1/B Blender Milk-shake F6S/B.Info: the design will be black, with silver ventilations !!
%
%
7 liters Planetary mixerOn/Off switch, with variable speed. Planetary mixer, metal construction.Tilt-head allows for an easy receiving container removal, with microswitch, easy attachment replacement and easy cleaning.Removable stainless steel receiving container.3 metal attachments come standard (whip, hook and palette).self-lubricating gear transmission.24V, NVR (No-Voltage Release) to prevent accidental restart after power failure.Machine complying with the current CE standards.
%
Production 2400/800 pieces/h.Portions from 50 to 300 gr. "Millimetric" cut check by photocell.Transparant lid with micro-switch.Tank capacity 30 kg, knives and endless screws made of stainless steel.24-V low voltage control panel.Safety micro-switch.Entirely dismountable for an easy maintenance.Outside realization made of "epoxy paint" steel.Delivered with 2 forms CN/45 & CN70, base & pouring funnel for coupling BSL-300A.
%
Variable speed (Min. 53 rpm & Max. 517 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 10 L stainless steel tank.Table versions.Frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levelling.Fixed tank, automatic locking in working position.Protective plexiglass with safety device by microswitch.All parts in contact with the tank are made of stainless steel.Easy insertion and removal of utensils.When the...
%
Production 2400/800 pieces/h.Portions from 50 to 300 gr. "Millimetric" cut check by photocell.Transparant lid with micro-switch.Tank capacity 30 kg, knives and endless screws made of stainless steel.24-V low voltage control panel.Safety micro-switch.Entirely dismountable for an easy maintenance.Outside realization made of "epoxy paint" steel.Delivered with 2 forms CN/45 & CN70, base & pouring funnel for coupling BSL-300A.
%
%
Variable speed (Min. 56 rpm & Max. 477 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 20 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact with the...
%
3 speeds (1st Speed 107 rpm and 2nd Speed 214 rpm and 3rd Speed 428 rpm).Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 20 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in...
%
3 speeds (1st Speed 77 rpm and 2nd Speed 154 rpm and 3rd Speed 308 rpm).Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 40 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact...
%
Variable speed (Min. 65 rpm & Max. 551 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 40 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact with the...
%
%
Variable speed (Min. 65 rpm & Max. 551 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 60 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact with the...
%
%