%
Production 3600/1000 pieces/hour.Round portions 20 to 300 gr.Outside realization made of steel "epoxy painting".Lid with micro switch.Endless screw made in food aluminium.24 V low voltage control panel.Emergency stop switch.Dismountable for an easier mantenance.2 back wheels for an easyer transport.
%
Exceptional cut for large volumes of cooked and cold meats (not suitable for cheese). The food cart is mounted on ball bearings for a smooth sliding action. Thickness control with the button on the side. Belt operation.
%
Stainless steel / plastic version, 8cm opening, with separate pulp drain in the large plastic container, equipped with rubber feet that prevent leakage and vibrations, easy to clean, all parts that come into contact with the food are there 'stainless steel, safety and lock lever for opening and closing the centrifuge. Opening 8 cm.
%
Production 3600/800 pieces/hour.Round portions 20 to 1000 gr.Outside realization made of stainless steel.Lid with micro switch.Endless screw made in food aluminium.24V low voltage control panel.Emergency stop switch.Dismountable for an easier mantenance.4 wheels of witch 2 with brakes, easyer transport.
%
%
Stainless steel / plastic version, opening 7cm, with separate pulp drain in the large plastic container, equipped with rubber feet that prevent leakage and vibrations, easy to clean, all parts that come into contact with the food are there 'stainless steel, safety and lock lever for opening and closing the centrifuge. Opening 7cm.
%
Production per hour: 20 Lit/h.Chassis in stainless steel and "aluminium alloy".Disk and filter basket in stainless steel and nylon, all the parts in contact with the food are removable. easy cleaning.Orifice 65 mm x 40 mm, pusher in PVC.Ventilated motor, 3000/6000 Turns/Minutes. Thermico.Waste collector basket (Ø180 mm, h= 270 mm).Switch On/Off, micro-switch security device.The equipment is manufactured following the (CE) standards in force
%
%
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 190x250 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
%
- Multipurpose machine featuring the: citrus juicer P501/B, T1/B Blender Milk-shake F6S/B.Info: the design will be black, with silver ventilations !!
%
%
"Dry" gear transmission system.Blade in stainless steel, anti-stick.Manufactured in anodised aluminium, automatic sharpener.Cutting capacity 200x150 mm, adjustable cutting distance 0-15 mm.
%
Production 2400/800 pieces/h.Portions from 50 to 300 gr. "Millimetric" cut check by photocell.Transparant lid with micro-switch.Tank capacity 30 kg, knives and endless screws made of stainless steel.24-V low voltage control panel.Safety micro-switch.Entirely dismountable for an easy maintenance.Outside realization made of "epoxy paint" steel.Delivered with 2 forms CN/45 & CN70, base & pouring funnel for coupling BSL-300A.
%
%
Production 2400/800 pieces/h.Portions from 50 to 300 gr. "Millimetric" cut check by photocell.Transparant lid with micro-switch.Tank capacity 30 kg, knives and endless screws made of stainless steel.24-V low voltage control panel.Safety micro-switch.Entirely dismountable for an easy maintenance.Outside realization made of "epoxy paint" steel.Delivered with 2 forms CN/45 & CN70, base & pouring funnel for coupling BSL-300A.
%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 200x260 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
%
Realisation in anodized aluminium, base in stainless steel.Automatic or manual cutting.Programmation of the cutting from 10 to 50 slices or continuous.Blade in stainless steel AISI 304, automatic sharpening.Blade protection easy to remove.Cut capacity 245x300 mm, cut adjustment from 0 to15 mm, trajectory of carriage 330 mm, plate 270x260 mm.Low tension control 24 V.Belt drive.
%
Realisation in anodized aluminium, base in stainless steel.Automatic or manual cutting.Programmation of the cutting from 10 to 50 slices or continuous.Blade in stainless steel AISI 304, automatic sharpening.Blade protection easy to remove.Cut capacity 245x300 mm, cut adjustment from 0 to15 mm, trajectory of carriage 330 mm, plate 270x260 mm.Low tension control 24 V.Belt drive.
%
For each and every product such as ham, sausage, raw meat, cheese.Automatic carriage motion with variable speed control (it can be used manually as well).Independent controls for carriage motion and blade.Exclusive designed carriage with a special end weight and an adjustable vertical product fence to provide stability and advance products evenly.Stainless steel base.Oblique blade, 35° inclination (a blade extractor comes standard).Max. cutting capacity: 270xh230 (Ø 255 mm), slice thickness:...
%
Vertical, straight-blade slicer.Double-feed carriage with a clamping arm holding firmly in place all types of hams and cold meats.Max. cutting capacity: 270xh250 (Ø 250 mm), slice thickness: 0-30 mm.50 mm gap between blade and body. Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.A maintenance Kit comes...