Turns/minute: 320 rpm.Stainless steel juice bowl.Stainless steel lid and lever version. Main specifications:Black ABS molded body, rounded design.One-piece extracting cone and reamer (suitable for all citric fruits), allowing for the maximum yield and minimum waste.On/Off switch.Easy cleaning: the juice bowl assembly is instantaneously removable and dishwasher-safe.The equipment is manufactured following the (CE) standards in force.
Variable speed (Min. 65 rpm & Max. 551 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 40 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact with the...
Flow: 5000 m³/h. (with reduced pressure of 300 Pa).1220 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
15 levels, spaced 35 mm.Made in stained steel AISI 304.
- Water condenser- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
Stainless steel construction.Capacity: 12 cups in 6 minutes.Automatic filling of the tank, direct connection to the water system or manual filling through the upper valve (equipped with a safety grid), tank capacity 2.2 liters (equipped with an overflow device).Ergonomic filter holder (Ø 90 mm), made of stainless steel and equipped with athermal handle.Spray nozzle for a better coffee infusion.To start the brewing process, switch "II" and then press the "Brew" button, the "Filling" and...
General characteristics:AISI 304 stainless steel finish, between 12/10 mm and 30/10 mm thick, double cavity for better thermal and acoustic insulation (-60dB), adjustable stainless steel feet.Linear or angular implantations with left and right entries.Traction system with parallel stainless steel bars.Automatic advance system with 3 speeds.Ability to perform a continuous, basket-by-basket or delayedwash."Reversible" traction system, right left entry.Counter balanced wide opening doors with...
Flow: 5000 m³/h. (with reduced pressure of 300 Pa).1220 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
2 compressor groups and 2 evaporators, independent.Included: 2 x 2 grids GN2/1 (530x650 mm).Freezer: inner door fitted with warming resistance, copper coil evaporator, embedded in the walls (3 sides), manual defrost and depression valve, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant gas R290 Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the...
Cutter in stained steel AISI 304.Nylon handle.