%
Charging height diam. 365 mm (height glasses 325 mm). From 60 to 30 baskets/hour, 2 cycles, 60''-120''.Rotating (Upper and lower) wash and rinse arms.Self cleaning sprinklers.Tank (20 Lit., 2,1 kW) rounded edges, "stamped" bottom.Stamped walls.Stamped double walled doors, removable seal.Removable control panel.Automatic filling of the tank.Check valve.Hot water rinse (water consumption per cycle 2.4 liters), boiler (pressure) in stainless steel (6 Lit., 4.9 kW).Micro switch, when the door...
%
Version with incorporated water softener (ATTENTION: cold water connection).Charging height diam. 365 mm (height glasses 325 mm). From 60 to 30 baskets/hour, 2 cycles, 60''-120''.Rotating wash and rinse arms.Self cleaning sprinklers.Tank (20 Lit., 2,1 kW) rounded edges, "stamped" bottom.Stamped walls.Stamped double walled doors, removable seal.Removable control panel.Automatic filling of the tank.Washing pump 230V/1N 50Hz.Check valve.Hot water rinse (water consumption per cycle 2.4 liters),...
%
Version with incorporated drain pump.Charging height diam. 365 mm (height glasses 325mm). From 60 to 30 baskets/hour, 2 cycles, 60''-120''.Rotating wash and rinse arms.Self cleaning sprinklers.Tank (20 Lit., 2,1 kW) rounded edges, "stamped" bottom.Stamped walls.Stamped double walled doors, removable seal.Removable control panel.Automatic filling of the tank.Washing pump 230V/1N 50Hz.Check valve.Hot water rinse (water consumption per cycle 2.4 liters), boiler (pressure) in stainless steel (6...
%
Height of plates load Ø 365 mm (height glasses 325 mm).From 30 to 20 baskets/hour, PLD cycle 120'', 180'', continuously and ''Sanitisation''.3 phases: wash, unload, rinse.Standard discharge pump.Standard rinse pump (atmospheric boiler). Realization: entirely in stainless steel AISI 304. Rotating washing and rinsing arms (upper and lower) (made of composite material). Self-cleaning nozzles. Tank (20 lt - 2,1 kW) with rounded edges, "deep-drawn" bottom. Stamped basket slides, no roughness and...
%
Continuous water softener, incorporated (ATTENTION: connection to cold water).Height of plates load Ø 365mm (height glasses 325 mm).From 30 to 20 baskets/hour, PLD cycle 120'', 180'', continuously and "Sanitisation".3 phases: wash, unload, rinse.Standard discharge pump.Standard rinse pump (atmospheric boiler). Realization entirely in stainless steel AISI 304. Rotating washing and rinsing arms (upper and lower) (made of composite material). Self-cleaning nozzles. Tank (20 lt - 2,1 kW) with...
%
Designed according to the dimensions corresponding to the oven, all in stainless steel.Incorporated extraction motor (700 m³/h)Removable filters, for maintenance.Electronic speed regulator.Standard with support, to support the same oven.
%
Realization with rounded shapes, front in stainless steel.Incorporated extraction motor (700 M3/h)Removable filters, for maintenance.Electronic speed regulator.
%
Realization with rounded shapes, front in stainless steel.Incorporated extraction motor (700 M3/h)Removable filters, for maintenance.Electronic speed regulator.
%
Realization with rounded shapes, front in stainless steel.Incorporated extraction motor (700 M3/h)Removable filters, for maintenance.Electronic speed regulator.
%
Realization with rounded shapes, front in stainless steel.Incorporated extraction motor (700 M3/h)Removable filters, for maintenance.Electronic speed regulator.
%
%
Capacity: 10x GN 1/1 (or) 10x EN 600x400 mm (optional grids and plates).Production per cycle: 40 Kg (+70° C +3° C) or 25 Kg (+70° C -18° C).Core probe as standard.Anti-tilting" structure in stainless steel wire (removable), spacing for GN 1/1 (75 mm) & EN 600x400 (44 mm) plates.Door with integrated "non protruding" handle (On order reversible)Upper panel for accessibility to the compressor unit, hinged, easy inspection.Hinges with automatic return (90° locking).Insulation 70 mm...
%
%
Capacity: 10x GN 1/1 (or) 10x EN 600x400 mm (optional grills and plates).Prodution per cycle : 40 Kg (+70° C +3° C) or 25 Kg (+70° C -18° C).Core probe, serial."Anti tilt" Structure made of stainless steel wire (removable), space for trays GN 1/1 (75 mm) & EN 600x400 (44 mm).Door with integrated "non-projecting" handle (reversible on order).Top panel for access to the compressor unit, on hinges, easy inspection. - Hinges with automatic return (blocking at 90 °).Insulation 70 mm...
%
1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible (kit is not necessary),...
%
Glass doors with integrated LED-light.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without rougness).Doors with ergonomic handle and reversible...
%
"Wall" model with back board.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible...
%
"Wall" model with back board.Glass doors with integrated LED-light.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without rougness).Doors with...
%
Refregiration unit on the left side"Wall" model with back board.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic...
%
Refrigeration unit on the left side.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Conception MonocoqueManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
%
%
- Dimensions of the basin 240x380xh235 mm.- Oil capacity, min 5,5 lit., max 7 lit.- 1 chromed basket, dimensions 225x325xh90 mm.- Made of 304 stainless steel, deep-drawn "top" thickness 15/10 mm, adjustable cylinders, waterproof "IPX4". - Y-shaped deep-drawn tank with rounded corners, equipped with a cold zone. Made of AISI 304 stainless steel. Drain tap (ball valve). Stainless steel cover as standard. - Electric heating of the "Y" tank, by radiant elements placed under the tank, regulation...
%
Dimensions of the basin 240x380xh235 mm.Oil capacity, min 5,5 lit., max 7 lit.1 chromed basket, dimensions 225x325xh90 mm.Made of 304 stainless steel, deep-drawn "top" thickness 15/10 mm, adjustable cylinders, waterproof "IPX4".Y-shaped deep-drawn tank with rounded corners, equipped with a cold zone. Made of AISI 304 stainless steel. Drain tap (ball valve). Stainless steel cover as standard.Electric heating of the "Y" tank, by radiant elements placed under the tank, regulation from 105°C to...