%
- Structures with slides for plates (8 levels) included (460x340 or 433x333 or 353x325 GN2/3) - Glass door- Structure for plates (74 mm), removable- Door in tempered glass (6 mm) with stainless steel handle- Heating through stainless steel armoured resistances- Adjustable slides- GN vat inside (on the bottom), tu put water and to humidify the cupboard- On/off switch- Mechanical thermosat (30° to 60°C) with pilot light- Manufactured in stainless steel- Adjustable stainless steel feet-...
%
Tank GN 1/3, delivered with 6 specific baskets, numbered.Thermal lateral handles and stainless steel lid.Heatng resistance, except for tank (standard bain-marie).On/Off switch and thermostat from 0 to 100°C, with limiting device.
%
Capacity 16x 600x400, H=700 mm
%
- Capacity: 28x 600x400 mm, H =940 mm
%
Capacity 12x 600x400 mm, H=700 mm
%
Capacity 21x 600x400 mm, H=940 mm
%
- Capacity 24x 600x400 mm, H=700 mm
%
Capacity 42x 600x400 mm, H=940 mm
%
%
%
%
Cast iron mould, ensures a homogeneous baking result.Heating, by armoured resistors, in stainless steel treated "incoloy".Thermostatically controlled from 0 to 300°C.All stainless steel handle (very robust).Removable peripheral trunking, facilitating maintenance (exclusive patent).Switch-commutator and indicator light(s).Made of stainless steel, adjustable feet.Appliances built in compliance with the standards (CE) in force.
%
3 Filters ANTI-FAT labyrinths (2x 400x500 & 1x 500x500 mm) Model with built-in centrifugal fan "watertight" (IP55) (central position, in vertical).Designed in stainless steel AISI 441, assembly by points welding.Filters anti-fat has stainless steel labyrinths AISI 430.Peripheral channel for the fat collection, fitted with a drainage tap.Built-in lighting (LED) waterproof (IP65), high temperature.Speed regulator built-in the frontal.
%
Cast iron mould, ensures a homogeneous baking, ("Liège" is suitable for baking fresh or frozen waffles (type Mc Cain or Avieta).Heating by armoured resistors in stainless steel treated "Incoloy".Regulation from 0 to 300°C.All stainless steel handle (very robust).Removable peripheral trunking, facilitating maintenance (exclusive patent).Switch-commutator and indicator light(s).Made of stainless steel, adjustable feet.Appliances built in compliance with the standards (CE) in force.
%
Flow: 5000 m³/h. (with reduced pressure of 300 Pa).1220 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Flow: 5000 m³/h. (with reduced pressure of 300 Pa).1220 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
- Air condenser.- Vertical turbine with automatic extraction, low maintenance and very easy to use.- Easy installation due to its compact size.- Minimum mixing capacity 1 liter and maximum 2 liters.- Noise level below 70 dB.- Cycle with time control or with temperature control.- Vertical cylinders-evaporators for a bigger surface of exchange.- Exclusive dispensing device.- Auto diagnostic system.- Cycle time: 10/20 min.- Hourly production: 12 liters.NB: mainly for cold work.
%
- Air condenser.- Vertical turbine with automatic extraction, low maintenance and very easy to use.- Easy installation due to its compact size.- Minimum mixing capacity 1 liter and maximum 2 liters.- Noise level below 70 dB.- Cycle with time control or with temperature control.- Vertical cylinders-evaporators for a bigger surface of exchange.- Exclusive dispensing device.- Auto diagnostic system.- Cycle time: 10/20 min.- Hourly production: 12 liters.NB: mainly for cold work.
%
Stainless steel construction.Each plate with lighted On/Off switch.NB: delivered without carafes4 lower feet in ABSThe device is built in compliance with the current CE standards.
%
Flow: 6000 m³/h. (with reduced pressure of 300 Pa).920 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Flow: 6000 m³/h. (with reduced pressure of 300 Pa).920 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Cooling capacity rendered 1960 (W/f) for chamber volume 16,4 m³ / 16400 Lit. (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. "Overlapping" refrigeration units.Unit certified in climatic class 5 (40°C Temperature - 40% Humidity).All units are supplied as standard with a high pressure switch and KVL valve.Automatic hot gas defrost with self-evaporation and overflow.The evaporator drain pipe is equipped with a resistor to prevent ice formation. Refrigerant gas...
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.