%
Helemaal uitgevoerd in roestvrij staal.Aan de basis is die bestemd voor deeg te kneden (inhoud kuip: 3 kg meel) en het automatisch produceren van harde tarwe deeg (25/35 kg/u).Mes voor het automatisch snijden van lange of korte pasta.Uitrusting voor de regeling van de snelheid.Geleverd met 4 matrijzen:n°7 (1,5 mm) voor taglionin°28 (6 mm) voor tagliateln°89 (10 mm) voor macaronisfoglia 2x85 mm pasta bladen,Het apparaat is overeenkomstig met de "EG" richtlijnen voor veiligheid en...
%
Helemaal uitgevoerd in roestvrij staal.Aan de basis is die bestemd voor deeg te kneden (inhoud kuip: 3 kgmeel) en het automatisch produceren van harde tarwe deeg (8/10 kg/u).Mes voor het automatisch snijden van lange of korte pasta.Uitrusting voor de regeling van de snelheidGeleverd met 4 matrijzen:n°7 (1,5 mm) voor taglionin°28 (6 mm) voor tagliateln°89 (10 mm) voor macaronispoglia 2x85 mm pasta bladen,Het apparaat is overeenkomstig met de "EG" richtlijnen voor veiligheid en...
%
4 burners, 4x 5,5 Kw High Efficiency-Flexibility. Deep-drawn top, cast iron burners, brass crown (high efficiency).Regulation by gas valve, ignition by pilot light and safety by thermocouple.Electric convection oven GN 1/1, heating by 3 circular stainless steel resistances.Oven temperature regulation from 70°C to 270°C, by thermostat, 1 grid available.NB: smooth or ribbed trays in option.
%
5 burners: 3x 3,3 kW, 2x 2,8 kW, regulation valve with safety thermoelectric sensor, electronic ignition device.Upper grids in enameled steel (510x265 mm).Convection oven 4x GN 1/1 (535x325xh340mm) spacing 50mm, door and handle of the oven in stainless steel.Heating of the oven by circular heating elements (3 kW), regulation of the oven by thermostatic valve T° de 50° - 300° C.Designed in stainless steel, adjustable stainless steel feet.
%
"Wall" model with back board.4 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Sink 340x400x200mm integrated in the work top (right side), delivered with a siphon; drain screen and overflow (NB: tap on request, opening on the work top (27 mm))."Wall" model with turned-up back edge.4 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), per door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides...
%
Delivered with stainless steel lidDelivered with standard slides 4x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 5x GN1/4 h150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 6x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 8x GN1/4 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 9x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 10x GN1/4, 1x 1/9 h 150 mmSupport strip trays GN 1/9 are delivered standard.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by...
%
Delivered with "toughened" glass on top.Delivered with standard slides 4x 1/3 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 4x1/3, 1x1/9 h 150 mm.Support strip trays GN 1/9 are delivered standard.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the...
%
Delivered with stainless steel lid(s).Standard delivered slides 6x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 7x1/3 mm.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 8x 1/4 et 4x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 10x1/3 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
5 burners: 3x 3,3 kW, 2x 2,8 kW, regulation valve with safety thermoelectric sensor, electronic ignition device.Upper grids in enameled steel (510x265 mm).Convection oven 4x GN 1/1 (535x325xh340mm) spacing 50mm, door and handle of the oven in stainless steel.Heating of the oven by circular heating elements (3 kW), regulation of the oven by thermostatic valve T° de 50° - 300° C.Designed in stainless steel, adjustable stainless steel feet.
%