%
- Manufactured in stainless steel AISI 441. - Top : in stainless steel 15/10, reinforced by a stainless steel sheet on the bottom.- Modules: 3 drawers for the shelves 600x400, plates structures 6 slide levels 600x400.- Hopper: capacity 125 lit., lid + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - Top : in stainless steel 15/10, reinforced by a stainless steel sheet on the bottom.- Cupboards: 2 isolated sliding doors with double wall , adjustable intermediate shelf.- Modules: 3 drawers for the shelves 600x400, plates structures 6 slide levels 600x400.- Hopper: capacity 125 lit., lid + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000,...
%
- Manufactured in stainless steel AISI 441. - Top : in stainless steel 15/10, reinforced by a stainless steel sheet on the bottom.- Cupboards: 2 isolated sliding doors with double wall , adjustable intermediate shelf.- Modules: 3 drawers for the shelves 600x400, plates structures 6 slide levels 600x400.- Hopper: capacity 125 lit., lid + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000,...
%
Helemaal uitgevoerd in roestvrij staal.Aan de basis is die bestemd voor deeg te kneden (inhoud kuip: 3 kg meel) en het automatisch produceren van harde tarwe deeg (25/35 kg/u).Mes voor het automatisch snijden van lange of korte pasta.Uitrusting voor de regeling van de snelheid.Geleverd met 4 matrijzen:n°7 (1,5 mm) voor taglionin°28 (6 mm) voor tagliateln°89 (10 mm) voor macaronisfoglia 2x85 mm pasta bladen,Het apparaat is overeenkomstig met de "EG" richtlijnen voor veiligheid en...
%
Helemaal uitgevoerd in roestvrij staal.Aan de basis is die bestemd voor deeg te kneden (inhoud kuip: 3 kgmeel) en het automatisch produceren van harde tarwe deeg (8/10 kg/u).Mes voor het automatisch snijden van lange of korte pasta.Uitrusting voor de regeling van de snelheidGeleverd met 4 matrijzen:n°7 (1,5 mm) voor taglionin°28 (6 mm) voor tagliateln°89 (10 mm) voor macaronispoglia 2x85 mm pasta bladen,Het apparaat is overeenkomstig met de "EG" richtlijnen voor veiligheid en...
%
"Wall" model with back board.4 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Sink 340x400x200mm integrated in the work top (right side), delivered with a siphon; drain screen and overflow (NB: tap on request, opening on the work top (27 mm))."Wall" model with turned-up back edge.4 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), per door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides...
%
Delivered with stainless steel lidDelivered with standard slides 4x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 5x GN1/4 h150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 6x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 8x GN1/4 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 9x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 10x GN1/4, 1x 1/9 h 150 mmSupport strip trays GN 1/9 are delivered standard.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by...
%
Delivered with "toughened" glass on top.Delivered with standard slides 4x 1/3 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 4x1/3, 1x1/9 h 150 mm.Support strip trays GN 1/9 are delivered standard.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the...
%
Delivered with stainless steel lid(s).Standard delivered slides 6x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 7x1/3 mm.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 8x 1/4 et 4x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 10x1/3 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%