%
Production: 10/12 oranges (maximum diameter 70 mm) per minute.Storage capacity: 3 oranges.Loading ramp and recovery tank supplied as standard.Pressure control.Made of "food" materials that do not undergo any alteration in contact with orange juice.Designed for easy maintenance, exterior and interior.Automatic shutdown.
%
Connection cold or warm water.Upper basin with 3 compartments for washing products_backup_1_1.Emergency stop button, "Hot shot" kind.Stainless steel base allowing the ground anchor.Designed in stainless steel AISI 304.
%
- Gas model. - In option : Trolley 15 or 18x 450x650 mm (or) 15 or 18x 500x700 mm, burner (gas or fuel oil) as well as the trolley inside (not delivered with the oven).- Designed for high productivity, double quick to put inside and to take off.- Façade in chromium-nickel-steel AISI 304.- Steel heat exchanger "high productivity", very low energy consumption.- Turning chariot, hanging for the upper chariot.- Cooking chamber, designed in chromium-nickel-steel AISI 304.- Oven door with thermal...
%
- Electric model. - In option : Trolley 15 or 18x 450x650 mm (or) 15 or 18x 500x700 mm, as well as the trolley inside (not delivered with the oven).- Designed for high productivity, double quick to put inside and to take off.- Façade in chromium-nickel-steel AISI 304.- Turning trolley, hanging for the upper chariot.- Cooking chamber, designed in chromium-nickel-steel AISI 304.- Oven door with thermal handle, security device and large security glass.- Standard vacuum for the evacuation of the...
%
Turns/minute: 14000 rpm.Stainless steel cup (900 cl).Shaft with 4 stainless steel knives, ideal for cocktails and sorbets preparation.
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel),...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel),...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.NB: delivered without grids and without GN plates. Internal and external construction in AISI 304 stainless steel, thermal insulation in ceramic fibre, control panel equipped with a stainless steel filter, preventing clogging of components (ventilated panel), stainless steel feet. Cooking chamber: fully welded, corners and rounded corners. Seal...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.NB: delivered without grids and without GN plates. Internal and external construction in AISI 304 stainless steel, thermal insulation in ceramic fibre, control panel equipped with a stainless steel filter, preventing clogging of components (ventilated panel), stainless steel feet. Cooking chamber: fully welded, corners and rounded corners. Seal...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Internal and external construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet....
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Internal and external construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet....
%
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 6 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R600a, drain for the condensate.Regulation by electronic thermostat (digital), Lighting by "LED". NB Provide discharge (or) a condensate drain pan.
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Standard equipment: 8 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R134A, drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Adjustable feet.NB Provide discharge (or) a condensate drain pan.
%
2 independent plates (2x 4 kW). Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th) with waterproof liquid collection, levelling cylinders, waterproof "IPX5".Cast iron square plates, 300x300 mm, stainless steel sealing edge. Regulation by 7-position switch.Appliances built in compliance with current standards (CE)
%
2 independent plates (2x 4 kW). Made of AISI 304 stainless steel, deep-drawn "Top" (20/10th) with waterproof liquid collection, levelling cylinders, waterproof "IPX5".Cast iron square plates, 300x300 mm, stainless steel sealing edge. Regulation by 7-position switch.Appliances built in compliance with current standards (CE)
%
4 independent plates, Ø 180 mm (4x 2 kW). " Stamped " upper top.Made of AISI 304 stainless steel.Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by 6-position switch.The appliance is built in compliance with all the regulations (CE) in force.
%
Useful dimensions of the cooking surface 650x570 mm, 37.05 dm2.2 independent cooking zones.Made of AISI 304 stainless steel, adjustable jacks.Deep-drawn top (15/10 mm) in AISI 304 stainless steel.Rear chimney in stainless steel AISI 304.Cast iron cooking hob (15 mm) with high thermal conductivity, inclined at the front and equipped with a welded stainless steel anti-splash edge on 3 sides (3 mm), perfectly sealed. A cooking juice collection drawer is positioned on the front of the...
%
Useful dimensions of the cooking surface 650x570 mm, 34 dm2.Version: smooth hard chrome plate "50 µm".2 independent cooking zones. Made of stainless steel AISI 304, adjustable jacks.Deep-drawn top (15/10 mm) in stainless steel AISI 304, waterproof "IPX5".Rear chimney in stainless steel AISI 304.Cast iron cooking plate (15 mm) with high thermal conductivity completely welded to the top, inclined at the front.Anti-splash edge on 3 sides (see A7/PS...).Frontal collection tray for recuperation of...