%
Tank GN 1/3, delivered with 6 specific baskets, numbered.Thermal lateral handles and stainless steel lid.Heatng resistance, except for tank (standard bain-marie).On/Off switch and thermostat from 0 to 100°C, with limiting device.
%
Included: 3 grids GN 2/1 (530x650 mm).4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle, closing by "triple chamber" and magnetic seal (easy replacement,...
%
Included: 3 grids GN 2/1 (530x650 mm) by door.Inner door with warm resistance.Depression valve delivered standard.4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and...
%
Included: 20 pairs of slides (400x600 mm).Inner door with warming element and depression valve.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel AISI 304, inside and outside (back in galvanized steel), monocoque frame.Stainless steel racks and slides (anti-tilting), allowing to place the plates as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal...
%
Included: 20 pairs of slides (600x800 mm).Inner door with warming element and depression valve.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel AISI 304, inside and outside (back in galvanized steel), monocoque frame.Stainless steel racks and slides (anti-tilting), allowing to place the plates as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal...
%
- Manufactured in stainless steel AISI 441. - 3 drawers for the plates 600x400.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
%
%
- Manufactured in stainless steel AISI 441.- 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
%
- Vervaardigd uit RVS. AISI 441- Structuur voor Dienbladen 600x400, 6niveaus
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
%
- Manufactured in stainless steel AISI 441. - Thickness 15/10, reinforced with a stainless steel sheet on the bottom.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - Thickness 15/10, reinforced with a stainless steel sheet on the bottom.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - Thickness 15/10, reinforced with a stainless steel sheet on the bottom.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - Capacity 125 liters, lids + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.