%
Included: 3 pairs of slides + 4 meat hooks + 2 stainless steel grids 2/1, for meat maturation.Refrigerant gas R134. Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frame.Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired (67 mm spacing), deep-drawn inner bottom and rounded corners and angles (without rough edges).Glazed doors with ergonomic handle (not projecting), reversible, closing by "triple...
%
Included: 2 pairs of slides + 8 meat hooks (4 per shelf).4 adjustable stainless steel feet.Refrigerant gas R134. Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired (67 mm spacing), deep-drawn inner bottom and rounded corners and angles (without rough edges)Glazed doors with ergonomic handle (not projecting), reversible, closing by "triple...
%
With humidifierIncluded: 2 pairs of slides + 8 meat hooks.Refrigerating gas R134. Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired (67 mm spacing), deep-drawn inner bottom and rounded corners and angles (without rough edges)Glazed doors with ergonomic handle (not projecting), reversible, closing by "triple chamber" and magnetic seal (easy...
%
"Wall" model with back board.4 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Sink 340x400x200mm integrated in the work top (right side), delivered with a siphon; drain screen and overflow (NB: tap on request, opening on the work top (27 mm))."Wall" model with turned-up back edge.4 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), per door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel (Food certified according to European regulation CE n.1935/2004), bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel (Food certified according to European regulation CE n.1935/2004), bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped...
%
Tank diameter 600, depth 400 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 600, depth 400 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 600, depth 530 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 600, depth 530 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Produces 113 kg per 24/hours.Storage in ABS, capacity 30 kg.4 lower regulation cylindersAir condenser. System with helicoidal fillings (continuous production).Evaporator in stainless steal.Tropical hermetic unit for ambience temperature +43 °C.Refrigerant gas R290 .Manufactured in stainless steel AISI 304, adjustable stainless steal feet.The equipment is manufactured following the (CE) standards in force.
%
Produces 113 kg per 24/hours.Storage in ABS, capacity 30 kg.4 lower regulation cylindersWater condenser. System with helicoidal fillings (continuous production).Evaporator in stainless steel.Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290.Manufactured in stainless steel AISI 304, adjustable stainless steel feet.The equipment is manufactured following the (CE) standards in force.
%
Produces 153 kg per 24/hours.Storage in ABS, capacity 55 kg.4 lower regulation cylindersAir condenser. System with helicoidal fillings (continuous production).Evaporator in stainless steel.Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290 .Manufactured in stainless steel AISI 304, adjustable stainless steel feet.The equipment is manufactured following the (CE) standards in force.
%
Produces 153 kg per 24/hours.Storage in ABS, capacity 55 kg.4 lower regulation cylindersWater condenser. System with helicoidal fillings (continuous production).Evaporator in stainless steel.Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290 .Manufactured in stainless steel AISI 304, adjustable stainless steel feet.The equipment is manufactured following the (CE) standards in force.
%
Production 157 kg/24/h. to combine with a storage unit.Continuous production, "worm" system, geared motor with thermal circuit breaker.Stainless steel evaporator.Air condenser (water version on request). System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290 .Manufactured in stainless steel AISI 304.Adjustable stainless steel feet.Machine without reserve to combine with an independent reserve in stainless steel, with...
%
Production 157 kg/24/h. to combine with a storage unit.Water condenser. System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290.Manufactured in stainless steel AISI 304.The equipment is manufactured following the (CE) standards in force.
%
Production 280 kg/24/h. to combine with a storage unit.Air condenser. System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290.Manufactured in stainless steel AISI 304.The equipment is manufactured following the (CE) standards in force.
%
Production 280 kg/24/h. to combine with a storage unit.Water condenser. System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290.Manufactured in stainless steel AISI 304.The equipment is manufactured following the (CE) standards in force.
%
Production 400 kg/24/h. to combine with a storage unit.Air condenser. System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290.Manufactured in stainless steel AISI 304.The equipment is manufactured following the (CE) standards in force.
%
Production 400 kg/24/h. to combine with a storage unit.Water condenser. System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290.Manufactured in stainless steel AISI 304.The equipment is manufactured following the (CE) standards in force.
%
Produces 67 kg per 24/hours.Storage in ABS, capacity 10 kg.4 lower regulation cylinders Air condenser. System with helicoidal fillings (continuous production).Evaporator in stainless steal.Tropical hermetic unit for ambience temperature +43 °C.Refrigerant gas R290.Manufactured in stainless steel AISI 304, adjustable stainless steal feet.The equipment is manufactured following the (CE) standards in force.
%
Produces 67 kg per 24/hours.Storage in ABS, capacity 10 kg.4 lower regulation cylindersWater condenser. System with helicoidal fillings (continuous production).Evaporator in stainless steel.Tropical hermetic unit for ambience temperature +43 °C.Refrigerant gas R290 Manufactured in stainless steel AISI 304, adjustable stainless steel feet.The equipment is manufactured following the (CE) standards in force.
%
Tank diameter 400 mm, depth 420 mm.Drain tap 6/4". Made of stainless steel AISI 304, adjustable feet in stainless steel.Pressed and sealed top (15/10 mm) in stainless steel AISI 304.Rear chimney in stainless steel AISI 304.Deep-drawn tank made of AISI 304 stainless steel, bottom in AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with removable strainer for protection of the drain valve, corners with...