%
Ribbon saw in stainless steel of 1550 mm. designed for cutting meat and frozen fish.Maximum cutting height 170 mm.Engine 1hp, tension regulator of the ribbon.Frame made of anodised aluminium.Security microswitch, engine brake, low tension operators.Equipped with a push-button, calibration plate in stainless steel AISI 304.
%
Left drain surface. Manufactured in stainless steel AISI 304/441 of 12/10 mm.Submerged top and back border of 85 mm.Dimensions tank: 500x400xh275 mm.Soundproof exterior bottom.Outlet valve and tube, adjustable stainless steel legs.Removable structure.Reinforced lower shelf (optional).
%
Tubular stainless steel structure, cross-section 2.5x2.5 cm, weldednext to the stainless steel finishing panel.High level suitable for insertion of GN containers for a total of 3x GN 1/1 with depths up to 20 cm.Lower levels with extractable stainless steel shelves, depth 2 cm.Grey rubber bumpers at corners.Swiveling castors, diam. 12.5 cm, including 2 braked castors.Total capacity 100 kg.
%
Base crossed with storage for plates and cutlery.Stainless steel posterns, roof with removable protections (condiments or dishes 190 mm) , anti-breath protection cristal "plexiglas", at each side, LED lighting.2 stainless steel tracks, 1 at each side (folding shelves, easy pass, standard doors, 0.8m.).Built-in compressor group, climate class 4 (30 ° C & 55% HR).Evaporator "coil" drowned in the stainless steel tank.Drain for the condenser evacuation.Ecological refrigerant R290 (without...
%
Ribbon saw in stainless steel of 1830 mm.Max. Cutting height : 210mmEngine 1hp, tensionregulator of the ribbon.Frame made of anodised aluminium.Security microswitch, engine brake, low tension operators.Equipped with a pusher,calibration plate in stainless steel AISI 304.
%
With shelf underneath.Right drain surface.Manufactured in stainless steel 18/10 AISI 304/441 of 12/10 mm.Submerged top and back border of 85 mm.Dimensions tank: 500x400xh275mm.Soundproof exterior bottomOutlet valve and tube, adjustable stainless steel legs.Welded structure.
%
Tubular stainless steel structure, cross-section 2.5x2.5 cm.High level suitable for insertion of GN containers for a total of 3x GN 1/1 with depths up to 20 cm (containers not included).Lower levels with extractable stainless steel shelves.Grey rubber bumpers at corners.Swiveling castors, diam. 12.5 cm, including 2 braked castors.Total capacity 80 kg.
%
Base crossed with storage for plates and cutlery.Stainless steel posterns, roof with removable protections (condiments or dishes 190 mm) , anti-breath protection cristal "plexiglas", at each side, LED lighting.2 stainless steel tracks, 1 at each side (folding shelves, easy pass, standard doors, 0.8m).Built-in compressor group, climate class 4 (30 ° C & 55% HR).Evaporator "coil" drowned in the stainless steel tank.Drain for the condenser evacuation.Ecological refrigerant R290 (without...
%
Blade length 1650 mm.Height cap. 250 mm.AISI 304 stainless steel waterproof construction.Equipped with meat pusher and portion device.Interlocked waste tray is removable from outside.Removable door and upper pulley for easier cleaning.Aluminum pulleys with sealed ball bearings.Single-phase motors comes with standard thermal protection.Easy unlocking of the upper pulley allows for easier cleaning and blade replacement.Removable PVC scrapers.IP 54 24 V on/off switch with safety microswitch.The...
%
With shelf underneath.Left drain surface.Manufactured in stainless steel 18/10 AISI 304/441 of 12/10 mm.Submerged top and back border of 85 mm.Dimensions tank: 500x400xh275 mm.Soundproof exterior bottomOutlet valve and tube, adjustable stainless steel legs.Welded structure.
%
Tubular stainless steel structure, cross-section 2.5x2.5 cm.High level suitable for insertion of GN containers for a total of 3x GN 1/1 with depths up to 20 cm (containers not included).Lower levels with extractable stainless steel shelves.Grey rubber bumpers at corners.Swiveling castors, diam. 12.5 cm, including 2 braked castors.Total capacity 80 kg..
%
Base crossed with storage for plates and cutlery.Stainless steel posterns, roof with removable protections (condiments or dishes 190 mm) , anti-breath protection cristal "plexiglas", at each side, LED lighting.2 stainless steel tracks, 1 at each side (folding shelves, easy pass, standard doors, 0.8m.)Built-in compressor group, climate class 4 (30 ° C & 55% HR).Evaporator "coil" drowned in the stainless steel tank.Drain for the condenser evacuation.Ecological refrigerant R290 (without...
%
Blade length 2020 mm.Height cap. 330 mm.AISI 304 stainless steel waterproof construction.Equipped with meat pusher and portion device.Interlocked waste tray is removable from outside.Removable door and upper pulley for easier cleaning.Aluminum pulleys with sealed ball bearings.Single-phase motors comes with standard thermal protection.Easy unlocking of the upper pulley allows for easier cleaning and blade replacement.Removable PVC scrapers.IP 54 24 V on/off switch with safety microswitch.The...
%
Right drain surface. Manufactured in stainless steel AISI 304/441 of 12/10 mm.Submerged top and back border of 85 mm.Dimensions tank: 600x500xh325 mm.Soundproof exterior bottom.Outlet valve and tube, adjustable stainless steel legs.Removable structure.Reinforced lower shelf (optional).
%
Stainless steel tube structure AISI 304 18/10 20x20 mm.Sloping base and stainless steel AISI 304 covering.Capacity 200 plates.4 swivel castors with stubborn Ø 125, 2 with brake.Can be dismantled.
%
Base crossed with storage for plates and cutlery.Stainless steel posterns, roof with removable protections (condiments or dishes 190 mm) , anti-breath protection cristal "plexiglas", at each side, LED lighting.2 stainless steel tracks, 1 at each side (folding shelves, easy pass, standard doors, 0.8 m).Built-in compressor unit, climate class 4 (30°C & 55% RH)Evaporator "coil" drowned in the stainless steel tank.Ecological refrigerant R290 (CFC-free)Insulation made of expanded polyurethane,...
%
Blade length 2400 mm.Height cap. 365 mm.AISI 304 stainless steel waterproof construction.Equipped with meat pusher and portion device.Interlocked waste tray is removable from outside.Removable door and upper pulley for easier cleaning.Aluminum pulleys with sealed ball bearings.Single-phase motors comes with standard thermal protection.Easy unlocking of the upper pulley allows for easier cleaning and blade replacement.Removable PVC scrapers.IP 54 24 V on/off switch with safety microswitch.The...
%
Left drain surface. Manufactured in stainless steel AISI 304/441 of 12/10 mm.Submerged top and back border of 85 mm.Dimensions tank: 600x500xh325 mm.Soundproof exterior bottom.Outlet valve and tube, adjustable stainless steel legs.Removable structure.Reinforced lower shelf (optional).
%
Stainless steel tube structure AISI 304 18/10 Ø 25 mm.Top and shelf 1000x500 mm in stainless steel AISI 304 submerged and soundproof.Useful loading capacity 80 kg per shelf.4 swivel castors with stubborn Ø 125 mm, 2 with brake.Can be dismantled.
%
Base crossed with storage for plates and cutlery.Stainless steel posterns, roof with removable protections (condiments or dishes 190 mm) , anti-breath protection cristal "plexiglas", at each side, LED lighting.2 stainless steel tracks, 1 at each side (folding shelves, easy pass, standard doors, 0.8 m).Built-in compressor unit, climate class 4 (30°C & 55% RH)Evaporator "coil" drowned in the stainless steel tank.Ecological refrigerant R290 (CFC-free)Insulation made of expanded polyurethane,...
%
%
With shelf underneath.Right drain surface.Manufactured in stainless steel 18/10 AISI 304/441 of 12/10 mm.Submerged top and back border of 85 mm.Dimensions tank: 600x500xh325 mm.Soundproof exterior bottom.Outlet valve and tube, adjustable stainless steel legs.Welded structure.
%
Stainless steel tube structure AISI 304 18/10 Ø 25 mm.Top and shelf 800x500 mm in stainless steel AISI 304 submerged and soundproof.Useful loading capacity 80 kg per shelf.4 swivel castors with stubborn Ø 125 mm, 2 with brake.Can be dismantled.
%
- Refrigerated version: "coil" evaporator immersed under the stainless steel tank, expanded polyurethane insulation, CFC-free. - Drain for condensate discharge. - Ecological refrigerant R134A (CFC-free). - U.H./Danfoss compressor, for ambient temperature (+32°C). - Electronic thermostat.- Wooden construction. - Through base for the storage of plates and cutlery. - Brushed stainless steel pots, roof with removable retainers (condiments or 190 mm plates), "tempered" glass breath guard on each...