%
Ribbon saw in stainless steel of 1550 mm. designed for cutting meat and frozen fish.Maximum cutting height 170 mm.Engine 1hp, tension regulator of the ribbon.Frame made of anodised aluminium.Security microswitch, engine brake, low tension operators.Equipped with a push-button, calibration plate in stainless steel AISI 304.
%
2 independent heating sources selected by switch and regulated by thermostat (+20° +90°C) with indicator light.Ceramic resistance above the tray.Reinforced lower resistance under the tank.Pressed fully tilted for emptying without oil residue, curved pan totally removable drip.Drain by stainless steel tap with safety system.
%
Base crossed with storage for plates and cutlery.Stainless steel posterns, roof with removable protections (condiments or dishes 190 mm) , anti-breath protection cristal "plexiglas", at each side, LED lighting.2 stainless steel tracks, 1 at each side (folding shelves, easy pass, standard doors, 0.8m.).Built-in compressor group, climate class 4 (30 ° C & 55% HR).Evaporator "coil" drowned in the stainless steel tank.Drain for the condenser evacuation.Ecological refrigerant R290 (without...
%
Supplied as standard with 1 stainless steel plate and 1 grid 460x340 (433x333 mm grids or plates can also be supplied). Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable", removable inner glass for easy...
%
Ribbon saw in stainless steel of 1830 mm.Max. Cutting height : 210mmEngine 1hp, tensionregulator of the ribbon.Frame made of anodised aluminium.Security microswitch, engine brake, low tension operators.Equipped with a pusher,calibration plate in stainless steel AISI 304.
%
Base crossed with storage for plates and cutlery.Stainless steel posterns, roof with removable protections (condiments or dishes 190 mm) , anti-breath protection cristal "plexiglas", at each side, LED lighting.2 stainless steel tracks, 1 at each side (folding shelves, easy pass, standard doors, 0.8m).Built-in compressor group, climate class 4 (30 ° C & 55% HR).Evaporator "coil" drowned in the stainless steel tank.Drain for the condenser evacuation.Ecological refrigerant R290 (without...
%
Delivery with 1 plates in stainless steel and 1 grill 460x340 (Possibility of also receiving grids or plates of 433x333 mm)Grill salamander (0.7 kW). Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable",...
%
Blade length 1650 mm.Height cap. 250 mm.AISI 304 stainless steel waterproof construction.Equipped with meat pusher and portion device.Interlocked waste tray is removable from outside.Removable door and upper pulley for easier cleaning.Aluminum pulleys with sealed ball bearings.Single-phase motors comes with standard thermal protection.Easy unlocking of the upper pulley allows for easier cleaning and blade replacement.Removable PVC scrapers.IP 54 24 V on/off switch with safety microswitch.The...
%
Base crossed with storage for plates and cutlery.Stainless steel posterns, roof with removable protections (condiments or dishes 190 mm) , anti-breath protection cristal "plexiglas", at each side, LED lighting.2 stainless steel tracks, 1 at each side (folding shelves, easy pass, standard doors, 0.8m.)Built-in compressor group, climate class 4 (30 ° C & 55% HR).Evaporator "coil" drowned in the stainless steel tank.Drain for the condenser evacuation.Ecological refrigerant R290 (without...
%
Delivery with 2 plates in stainless steel and 1 grill EN 600x400 mm. Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable", removable inner glass for easy maintenance.
%
Blade length 2020 mm.Height cap. 330 mm.AISI 304 stainless steel waterproof construction.Equipped with meat pusher and portion device.Interlocked waste tray is removable from outside.Removable door and upper pulley for easier cleaning.Aluminum pulleys with sealed ball bearings.Single-phase motors comes with standard thermal protection.Easy unlocking of the upper pulley allows for easier cleaning and blade replacement.Removable PVC scrapers.IP 54 24 V on/off switch with safety microswitch.The...
%
Delivered with 1 grid 460x340 mm. 1 turbine "autoreverse". Chamber with rounded corners.Easily removable" gasket on counter door.Easily-removable base plate structure (70 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Micro-switch to stop fan when opening.Electrical heating: stainless steel armored heaters located behind the turbine deflectors.Control...
%
Base crossed with storage for plates and cutlery.Stainless steel posterns, roof with removable protections (condiments or dishes 190 mm) , anti-breath protection cristal "plexiglas", at each side, LED lighting.2 stainless steel tracks, 1 at each side (folding shelves, easy pass, standard doors, 0.8 m).Built-in compressor unit, climate class 4 (30°C & 55% RH)Evaporator "coil" drowned in the stainless steel tank.Ecological refrigerant R290 (CFC-free)Insulation made of expanded polyurethane,...
%
Blade length 2400 mm.Height cap. 365 mm.AISI 304 stainless steel waterproof construction.Equipped with meat pusher and portion device.Interlocked waste tray is removable from outside.Removable door and upper pulley for easier cleaning.Aluminum pulleys with sealed ball bearings.Single-phase motors comes with standard thermal protection.Easy unlocking of the upper pulley allows for easier cleaning and blade replacement.Removable PVC scrapers.IP 54 24 V on/off switch with safety microswitch.The...
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
Base crossed with storage for plates and cutlery.Stainless steel posterns, roof with removable protections (condiments or dishes 190 mm) , anti-breath protection cristal "plexiglas", at each side, LED lighting.2 stainless steel tracks, 1 at each side (folding shelves, easy pass, standard doors, 0.8 m).Built-in compressor unit, climate class 4 (30°C & 55% RH)Evaporator "coil" drowned in the stainless steel tank.Ecological refrigerant R290 (CFC-free)Insulation made of expanded polyurethane,...
%
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
- Refrigerated version: "coil" evaporator immersed under the stainless steel tank, expanded polyurethane insulation, CFC-free. - Drain for condensate discharge. - Ecological refrigerant R134A (CFC-free). - U.H./Danfoss compressor, for ambient temperature (+32°C). - Electronic thermostat.- Wooden construction. - Through base for the storage of plates and cutlery. - Brushed stainless steel pots, roof with removable retainers (condiments or 190 mm plates), "tempered" glass breath guard on each...
%
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
%
%
- Structure with slides for plates (5 levels) included (600x400 EN or 530x325 GN1/1)- Manufactured in stainless steel (AISI 304)