%
- Coffee storage bin capacity 2 kg.- Dosing from 5 to 12 grams.- Grinder Ø 60 mm.- Duration of continuous use 30 min.- Protection level IP 21.Note: acoustic level (80 dB).
%
"Thermopane" glass door, with stainless steel frame.Included: 3 grids GN 2/1 (530x650 mm).Inner door with warming elements and depression valve.4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Glass door (double...
%
Stainless steel base AISI 304 18/10.Electric heating, thermostat from 30° to 90°C.
%
- Gas model. - In option : Trolley 15 or 18x 450x650 mm (or) 15 or 18x 500x700 mm, burner (gas or fuel oil) as well as the trolley inside (not delivered with the oven).- Designed for high productivity, double quick to put inside and to take off.- Façade in chromium-nickel-steel AISI 304.- Steel heat exchanger "high productivity", very low energy consumption.- Turning chariot, hanging for the upper chariot.- Cooking chamber, designed in chromium-nickel-steel AISI 304.- Oven door with thermal...
%
Top in stainless steel of 1.5 mm thickness.Multiple spring system.Heating through resistance, adjustable thermostat going form 30°C to 120°C.Submerged control panel, spiral cable 1.5 m.4 swivel castors Ø 125.mm, 2 with brake.Handle and 4 angle shock absorbers, non marking.Manufactured in stainless steel AISI 304, double wall isolation.
%
- Gas model. - In option : Trolley 15 or 18x 450x650 mm (or) 15 or 18x 500x700 mm, burner (gas or fuel oil) as well as the trolley inside (not delivered with the oven).- Designed for high productivity, double quick to put inside and to take off.- Façade in chromium-nickel-steel AISI 304.- Steel heat exchanger "high productivity", very low energy consumption.- Turning chariot, hanging for the upper chariot.- Cooking chamber, designed in chromium-nickel-steel AISI 304.- Oven door with thermal...
%
- Air condenser.- Vertical turbine, ideal for restaurants, requires little maintenance and is very easy to use. - Easy installation due to its compact size. - Minimum mixing capacity 0.5 lit. and maximum 1 lit. - Noise level lower than 70 dB. - Cycle with time control or temperature control. - Vertical evaporator cylinders for a larger exchange surface. - Exclusive distribution device. - System self diagnosis. - Cycle time: 15/20 min. - Hourly production: 5 liters. NB: mainly for cold work.
%
2 compressor groups and 2 evaporators, independent.Included: 2 x 2 grids GN2/1 (530x650 mm).Freezer: inner door fitted with warming resistance, copper coil evaporator, embedded in the walls (3 sides), manual defrost and depression valve, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant gas R290 Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the...
%
Unit width 400 mm, small footprint.Cooling capacity 953 (W/f) for chamber volume 6,1 m³ / 6100 Lit (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve. Supplied with a cable for the connection of the door heater. "Overlapping" refrigeration units.Unit certified in climatic class 5 (40°C Temperature - 40% Humidity).All units are supplied as standard with a high pressure switch and KVL valve.Automatic hot gas defrost with self-evaporation and overflow.The...
%
Capacity 40 levels GN 2/1 (or 80x GN 1/1).Standard 10 pair of slides and 10 plasticized grids GN 2/1. Stainless steel austenitic structure (food).Opening door at 120 °, with a vertical lock with a key code.Hinges with stop at 100 °, closing with automatic recall.Built-in compressor unit (ambient T ° 32 ° C)Refrigerant gas R290Ventilated internal evaporator.Integrated control panel, digital display.Electronic controller with automatic defrost.Possibility of use GN 2/1 or GN 1/1, spaced 60...
%
Internal dimensions 660x420xh825Standard equipment: 1 grid EN 600x4003 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
An intermediate glass.Double LED lighting of the display (under the upper and lower glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work surface.LED...
%
LED lighting of the display (under the upper glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work surface.LED lighting of the exposure.Intermediate...
%
Two intermediate glass.Double LED lighting of the display (under the upper and lower glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel work surface.LED...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5600 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Structure support AISI 304 for gastronome tray, maximum depth 150mm.Refrigerated display vat available only on ventilated showcase.Bain-marie and dry heat display vat available only on neutral display case.NB: It is recommended not to put an intermediate shelf.
%
Three-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5800 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
%
Included: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
Wall-mounted" version with raised rear edgeIncluded: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic...
%
Included: 3 grids (405x460 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
Wall-mounted" version with raised rear edge.Included: 3 grids (405x460 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with...
%
Manufactured entirely in stainless steel.This machine has been produced for a pasta production with raw materials like farina type 00, adding eggs and/or water and even spinach for green pasta or tomatoes for red pasta.Basically, it allows to mould pasta (capacity of the basin: 2 kg farina), as well as automatic production of pasta (hard semolina) (production 6 kg/h).Knife for automatic cutting of short or long pasta.Adjustable velocity.Standard delivered with 4 matrixes.n° 7 (1,5 mm) for...
%