%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm, rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin.Manufactured in stainless steel AISI 304 on adjustable feet in PVC.Closed at service side with 2 sliding doors.
%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm, rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin.Manufactured in stainless steel AISI 304 on adjustable feet in PVC.Closed at service side with 2 sliding doors.
%
%
Low version, installation option under sinks and cupboards etc...."Double-walled" VersionLoad height 405 mmPlate height 380 mm From 60 till 24 baskets/hour, cycles 60'' - 120'' - 150" or continuousRotating wash and rinse arms (upper and lower), lower in stainless steelSelf-cleaning jetsTank (23 Lt., 2,1 kW) with rounded edges, "stamped" bottom"Stamped" double walled door, "removable" gasketRemovable control panelAutomatic filling of the tankCheck valveHot water rinse (2,5 Lt. water...
%
Low version, installation option under sinks and cupboards etc...."Double-walled" VersionWith anti-pollution device, AB type (Break Tank), including rinse pump (atmospheric boiler)Load height 405 mmPlate height 380 mm3 stages: washing, discharge, rinseDrain pump, standardRinse pump, standard (atmospheric boiler) Double-walled version completely in stainless steel AISI 304. - From 60 till 24 baskets/hour, cycles 60'' - 120'' - 150" or continuous - Rotating wash and rinse arms (upper and...
%
Delivery with 1 plates in stainless steel and 1 grill 460x340 (Possibility of also receiving grids or plates of 433x333 mm)Grill salamander (0.7 kW). Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable",...
%
Capacità 3 GN 1/1Top superiore 1,2 mm ed arrotondato verso il basso 50 mm.Tino GN-200 mm, angoli arrotondati, scarico e troppo pieno.Riempimento dell'acqua nel tino manuale.Riscaldamento elettrico per resistenze situate sotto al tino.Regolazione per termostato, t° di 30°C a 90°C.Protezione per termostato di sicurezza.Armadio inferiore aperto lato servizioRealizzazione in acciaio inossidabile AISI 304 salita su piedi regolabili.N.B.: consegnato senza bac gastronorm.
%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm,rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin. Manufactured in stainless steel AISI 304 on adjustable feet in PVC.
%
Production 60 pieces/hour (cooking time 1 minute).Enameled cast-iron plate.Armoured spiral shaped elements made of stainless steel, treated "incoloy".Thermostatic regulation from 0° t0 300°C, control warning light.Standard delivered with wooden scrapper.Stainless steel frame.Equipment is manufactured following the (CE) standards in force.
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
Schedule production: 150 liters. Production of whipped cream and mousses with high overrun.Keeps the cream in perfect conditions preventing phase of separation.Consistent refrigeration from the container to the dispensing head.Allows interruption of production at anytime.Removable tank made of stainless steel, maintains easy and perfect hygiene.Standard: Labyrinth stem for cream with fat between 35% and 40% (other stem models possible on request).
%
%
Schedule production: 300 liters continuous. Production of whipped cream and mousses with high overrun.Keeps the cream in perfect conditions preventing phase of separation.Consistent refrigeration from the container to the dispensing head.Allows interruption of production at anytime.Removable tank made of stainless steel, maintains easy and perfect hygiene.Standard: Labyrinth stem for cream with fat between 35% and 40% (other stem models possible on request).
%
Included: 3 grids GN 2/1 (530x650 mm).4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle, closing by "triple chamber" and magnetic seal (easy replacement,...
%
- Water condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
- Water condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
Production per hour: 20 Lit/h.Chassis in stainless steel and "aluminium alloy".Disk and filter basket in stainless steel and nylon, all the parts in contact with the food are removable. easy cleaning.Orifice 65 mm x 40 mm, pusher in PVC.Ventilated motor, 3000/6000 Turns/Minutes. Thermico.Waste collector basket (Ø180 mm, h= 270 mm).Switch On/Off, micro-switch security device.The equipment is manufactured following the (CE) standards in force
%
Realisation "double walled".Loading height for trays 380 mm (plates diam. 380 mm).LMD mixed washing, also dishes, cutleryStandard rinsing pump (atmospheric boiler)Made of double walls made of stainless steel AISI 304.Cycles 60'' - 120"-80" or continuous.Rotating washing and rinsing arms (upper and lower) (stainless steel lower).Self cleaning sprinklers.Tank (23Lit. 2,1Kw) with rounded edges, "deep-drawn" bottom."Integral" tank filter, made of "cast" stainless steel.Adjustable stainless steel...
%
Included: 10 trays GN 1/1-h100 mm in polycarbonate.Evaporator at copper coil (lateral), hidden by a perforated stainless steel deflector.Manual defrosting, with water collecting tray.Bottom fitted with draining tap.4 adjustable stainless steel feet.Refrigerant gas R290. Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom...
%
%
- Luminous poster on the front side, with switch.2 service plugs (230/1N) inside the cabinet.Sneeze guard front glass in "tempered" glass, with one little service shelf made of stainless steel.Strenghtened work surface, with two openings to pass the cables of the devices, two openings on the back side of the cabinet too.Strenghtened intermediary shelf.Sliding doors, built in handles, standard delivered with key locks.Put on 4 castors, 2 with brakes.Manufactured in stainless steel 18/10 AISI...
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Included: 20 pairs of slides (600x800 mm) by door.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel, inside and outside in AISI 304 (back in galvanized steel), monocoque frame.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal with "3 compartments" (easy replacement...