%
- Heating surface 910x525mm. - Lower storage cabinet, with 2 sliding doors.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- All around, electric element heating, to block the elements, high productivity and optimal distribution of the heating, regulation by switches (from 50°C till 250°C) - Adjustable flue, easy cleaning.- Insulation of the appliance...
%
- Frame version with wheels (with brakes).- Made of AISI 304 stainless steel.- Powerful, ventilated motor, drive by hermetic gear motor, under oil bath, double protection of liquids. - Ideal for hard mixes or salads (minimum load 40%).- Tank with double liquid protection, foldable (with lever), automatic locking and safety locking device.- Cover equipped with a safety microswitch.- 2 mixing arms (side by side), removable (without tools), easy maintenance.- Geared motor housed in the side...
%
Electronic regulation T° 20° to 95°, high precision (0,03 C°), 25 preset programs (that can be modified as one pleases) or manual mode.Water agitator with propeller, uniform T°.Delayed start option for each programme from 10 minutes to 24 hours (in 10 minute steps).Quick changeover of the display between selected T°, actual T°, preset time, remaining time as well as the display from C° to F°.Clamp for any container (max H.165 mm, 50 l max).Stainless steel handle.Safety device and agitator...
%
Cylinder Ø 200xh495 mm.Body, Cylinder and Lid made of AISI 304 stainless steel. The cylnder is removable.The machine can be completely disassembled without tolls for simple cleaning.The hydraulic system operates at 120 bars, oil flow control, oil level indicator.Cooled silent motor (2800 rpm) with immediate action.Stainless steel piston rod, with automatic retrun when the motor stops.IP 54 on/off switch.3 filling tubes and wheels included.Machine produced in accordance with the actual CE...
%
- Heating surface 910x525mm.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- All around, electric element heating, to block the elements, high productivity and optimal distribution of the heating, regulation by switches (from 50°C till 250°C) - Adjustable flue, easy cleaning.- Insulation of the appliance with a 10 mm "alu" plate.- Lower board with 2...
%
Table top model.Made of AISI 304 stainless steel.Powerful motor. The rotor works in oil-bath and it's equipped with a double sealing system.Safety microswitch on the cover.Removable AISI 304 stainless steel mixing arm (no tools required).Front outlet opening for shaft removal and product unload.IP 54 on/off switch with NVR (24 V) and reverse for a better mix.Machine produced in accordance with the actual CE standards.
%
%
Cylinder Ø 260xh460 mm.Body, Cylinder and Lid made of AISI 304 stainless steel. The cylnder is removable.The machine can be completely disassembled without tolls for simple cleaning.The hydraulic system operates at 120 bars, oil flow control, oil level indicator.Cooled silent motor (2800 rpm) with immediate action.Stainless steel piston rod, with automatic retrun when the motor stops.IP 54 on/off switch.3 filling tubes and wheels included.Machine produced in accordance with the actual CE...
%
- Heating surface 1150x525mm. - Lower storage cabinet, with 2 sliding doors.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- All around, electric element heating, to block the elements, high productivity and optimal distribution of the heating, regulation by switches (from 50°C till 250°C) - Adjustable flue, easy cleaning.- Insulation of the appliance...
%
- Version on base with wheels (with brakes).- Made of AISI 304 stainless steel.- Powerful, ventilated, hermetically sealed gearmotor drive, under oil bath, double liquid protection.- Lid fitted with safety micro-switch.- Mixing arms can be removed (no tools required), easy maintenance.- Bowl opening on the side, for discharge of mixture and mixing arm.- 24 V controls (IP 54), with rotation inversion (better homogenization).
%
%
Cylinder Ø 320xh460 mm.Body, Cylinder and Lid made of AISI 304 stainless steel. The cylnder is removable.The machine can be completely disassembled without tolls for simple cleaning.The hydraulic system operates at 120 bars, oil flow control, oil level indicator.Cooled silent motor (2800 rpm) with immediate action.Stainless steel piston rod, with automatic retrun when the motor stops.IP 54 on/off switch.3 filling tubes and wheels included.Machine produced in accordance with the actual CE...
%
General characteristics:Tank GN 1/1-h 200 mm. Tank capacity 27 L.Athermique handles (for easy transportation).Transparent cover in polycarbonate, series (less energetic consume).Made in stainless steel AISI 304.
%
- Heating surface 1150x525mm.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- All around, electric element heating, to block the elements, high productivity and optimal distribution of the heating, regulation by switches (from 50°C till 250°C) - Adjustable flue, easy cleaning.- Insulation of the appliance with a 10 mm "alu" plate.- Lower board with 2...
%
- Chassis-mounted version with wheels (with brakes).- Made of AISI 304 stainless steel.- Powerful, ventilated motor, hermetically sealed gear motor drive, under oil bath, double liquid protection. - Ideal for hard mixes or salads (minimum load 40%).- Bowl with double liquid protection, hinged (with lever), automatic locking and safety locking device.- Lid fitted with safety microswitch.- 2 mixing arms (side by side), removable (no tools required), easy maintenance.- Geared motor housed in...
%
Cylinder Ø 200xh380 mm.AISI 304 stainless steel body and cylinder.Sturdy cylinder with double welding on the bottom plate, nylon pistons with air exhaust valve.Tempered steel gears, sliding on 4 sealed bearings.Standard: 3 filling tubes and fixing clamp included.Machine produced in accordance with the actual CE standards.
%
General characteristics:Tank GN 2/1-h 200 mm.Tank capacity 50 Lit .Athermique handles (for easy transportation).Cover, transparent in polycarbonate (less energetic consume).Made in stainless steel AISI 304.
%
- Heating surface 910x525mm. - Lower storage cabinet, with 2 sliding doors.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- Heating by aligned slit-burners (7 kW), optimal distribution of the heating.- Regulation by gas valves, with a light and a thermoelectric sensor.- Evacuation of the burned gases on 3 sides.- Insulation of the appliance with a 10...
%
External chassis in stainless steel.Cylinder dia 200x480mm in stainless steel.Funnel set included.2 gears.
%
%
- Heating surface 910x525mm.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- Heating by aligned slit-burners (7 kW), optimal distribution of the heating.- Regulation by gas valves, with a light and a thermoelectric sensor.- Evacuation of the burned gases on 3 sides.- Insulation of the appliance with a 10 mm "alu" plate.- Adjustable flue, easy...
%
External chassis in stainless steel.Cylinder dia 160x320mm in stainless steel.Funnel set included.2 gears.
%
- Heating surface 1150x525mm. - Lower storage cabinet, with 2 sliding doors.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- Heating by aligned slit-burners (7 kW), optimal distribution of the heating.- Regulation by gas valves, with a light and a thermoelectric sensor.- Evacuation of the burned gases on 3 sides.- Insulation of the appliance with a 10...
%
- Heating surface 1150x525mm.- High temperature steel plate (special alloy), polished, thickness 20 mm.- In the front, channel for the fat absorption and collection, with shaft and drawer for residues, optimal cleaning.- Heating by aligned slit-burners (7 kW), optimal distribution of the heating.- Regulation by gas valves, with a light and a thermoelectric sensor.- Evacuation of the burned gases on 3 sides.- Insulation of the appliance with a 10 mm "alu" plate.- Adjustable flue, easy...