%
Autonomous working.Manufactured in aluminium and ABS, collecting tray in food PVC.Stainless steel bowl (3 Lit.)Engine (800 rpm) with reduction gearbox (not direct)Lid with safety microswitch device.Control device for the ice thickness.
%
"Wenge" finish.Swivel castors, diam. 100 mm.Total capacity 40 kg. Solid wood structure.Shelves in plywood with solid wood edges and handles.
Capacity bread / hour: 300.Slice thickness: from 9 to 14mm and 16mm.Roll size: 440X300X170mm.Power: 550W.Power supply: TRI.380V (MONO optional).
%
Turns/minute: 15000 rpm.On/Off switch, stainless steel screws.. ABS molded body, inner stainless steel and aluminium structure, polished aluminium hopper, 2 liters receiving receptacle en ABS molded.. Fitted with safety microswitch on hopper lever and receiving receptacle, fitted with thermal motor relay.. Sturdy belt-driven transmission, minimal power loss.. The equipment is manufactured following the (CE) standards in force.
Frame: white color (RAL 9003), other colors on request with added valueBread loading: from the rearCutting width: 450mmSlice thickness: 11 mm as standard (other possible thicknesses: 9 or 13 mm to be specified when ordering, with a lead time of 8 weeks)Maximum height of the loaves: 16 cm - Ball: ø 33 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start by operating the lever"Punch" emergency stop device on the frontPower supply: three-phase 380 volts +...
Refrigerated table 3 stainless steel doors.230V / 152W3 adjustable gridsFrom 2 to 8 degreeSmall legs in front and wheels behind.
Refrigerated table 2 stainless steel doors.230V / 370W2 adjustable gridsFrom 2 to 8 degreeSmall legs in front and wheels behind
%
Bread capacity / hour: 300.Slice thickness: from 9 to 14mm; 16mm; 12 + 14mm and 14 + 16.Size of the bread: 600X300X170.Power: 550W.Power supply: TRI.380V (MONO optional)
%
Internal dimensions 372x484xh165 mmOn stainless steel "telescopic" slides.NB: Only available with 1 drawer kit (group side!)
Bread capacity / hour: 300.Slice thickness: 9-> 14mm / 16mm.Max bread dimension: 440X300X170mm.Motor power: 550W.Voltage: 230 / 400V 3Ph 50Hz.
%
Included: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
CAPACITY: loaves / hour 250 SLICE THICKNESS: 9 -> 14 mm / 16 mm SUN. MAX. BREAD: 440 x 300 x 165 mmMOTOR POWER: 550WVOLTAGE: 400V 3Ph 50Hz / * 230V 1Ph 50Hz (opt.)
%
Frame: WHITE RAL N°9003, other colors on request with capital gainBread loading: from aboveCutting width: 450mmSlice thickness: 11 mm as standard (other thicknesses possible: 9 or 13 mm to be specified when ordering, with 8 week lead time)Maximum height of the loaves: 18 cm - Ball: ø 30 cmCompliant with European machine directive 2006/42/ECSemi-automatic system with start-up by actuation of the lever"Punch" emergency stop device on the sidePower supply: three-phase 380 volts + neutral + earth...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Wall-mounted" version with raised rear edgeIncluded: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Included: 3 grids (405x460 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Wall-mounted" version with raised rear edge.Included: 3 grids (405x460 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...