%
Variable speed (from 35 to 60 movements per minute)Production capacity 5 to 23 kg (40 Lt)Flour capacity 3 to 15 kgTimer supplied as standardTank Ø 425xh295 mmAnalog control panel with low voltage 24 V (IP55).Traction by gears made of nylon (high hardness), very quiet operation.All moving parts are mounted on spherical bearingsEmergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304 stainless steel.Protective plexiglass, with safety...
%
Production per hour: 100 liters. Continue production of whipped cream and mousses.Keeps the cream in perfect conditions preventing phase of separation.Consistent refrigeration from the container to the dispensing head.Allows interruption of production at anytime.Removable tank made of stainless steel, maintains easy and perfect hygiene.Standard: Labyrinth stem for cream with fat between 35% and 40% (other stem models possible on request).
%
- Air condenser.- Versatile pasto turbine cookers for cooking, tempering, pasteurizing and freezing all mixtures or pastes. - Multilingual display with 14 pre-programmed cycles and 10 programmable production cycles. - Different heat treatments are carried out in a single cylinder, avoiding any handling or transfer. - Possibility of slow, fast or intermittent agitation. - Automatic memory of the last cycle. - Mix per cycle: 15/30 litres. - Cycle time: 90/130 mi
%
2 speeds (40 to 60 movements per minute)Production capacity 5 to 40 kg (70 Lt)Flour capacity 3 to 25 kgTimer supplied as standardAdjustable right armTank Ø 530xh320 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
Schedule production: 150 liters. Production of whipped cream and mousses with high overrun.Keeps the cream in perfect conditions preventing phase of separation.Consistent refrigeration from the container to the dispensing head.Allows interruption of production at anytime.Removable tank made of stainless steel, maintains easy and perfect hygiene.Standard: Labyrinth stem for cream with fat between 35% and 40% (other stem models possible on request).
%
%
Variable speed (40 to 60 movements per minute)Production capacity 5 to 40 kg (70 Lt)Flour capacity 3 to 25 kgTimer supplied as standardAdjustable right armTank Ø 530xh320 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
Schedule production: 300 liters continuous. Production of whipped cream and mousses with high overrun.Keeps the cream in perfect conditions preventing phase of separation.Consistent refrigeration from the container to the dispensing head.Allows interruption of production at anytime.Removable tank made of stainless steel, maintains easy and perfect hygiene.Standard: Labyrinth stem for cream with fat between 35% and 40% (other stem models possible on request).
%
Standard equipment includes 1 GN 2/3 grid.1 "autoreverse" turbine. Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Joint on the inner door, easily removable.Stamped bottom collects the condensate to the waste unit. Plate holder structure, easily removable (70 mm).Heat diffusers easily removable.Evacuation pipe for the condensate.Motors with "autoreverse" turbines (2800 t/mn) guarantee a perfect heat diffusion.Micro-switch stops the fan when the door...
%
- Water condenser.- Versatile pasto turbine cookers for cooking, tempering, pasteurizing and freezing all mixtures or pastes. - Multilingual display with 14 pre-programmed cycles and 10 programmable production cycles. - Different heat treatments are carried out in a single cylinder, avoiding any handling or transfer. - Possibility of slow, fast or intermittent agitation. - Automatic memory of the last cycle. - Mix per cycle: 15/30 litres. - Cycle time: 90/130 min.
%
Variable speed (from 35 to 60 movements per minute)Production capacity 5 to 45 kg (65 Lt)Flour capacity 3 to 25 kgTimer supplied as standardTank Ø 500xh340 mmAnalog control panel with low voltage 24 V (IP55).Traction by gears made of nylon (high hardness), very quiet operation.All moving parts are mounted on spherical bearingsEmergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304 stainless steel.Protective plexiglass, with safety...
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
%
%
Variable speed (35 to 60 movements per minute)Production capacity 5 to 60 kg (92 Lt)Flour capacity 3 to 40 kgTimer supplied as standardAdjustable right armTank Ø 550xh390 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
%
- Water condenser.- Versatile pasto turbine cookers for cooking, tempering, pasteurizing and freezing all mixtures or pastes. - Multilingual display with 14 pre-programmed cycles and 10 programmable production cycles. - Different heat treatments are carried out in a single cylinder, avoiding any handling or transfer. - Possibility of slow, fast or intermittent agitation. - Automatic memory of the last cycle. - Mix per cycle: 30/60 litres. - Cycle time: 90/130 min.
%
2 speeds (Fork: 1st Speed 19 rpm and 2nd Speed 27 rpm) & (Tank: 1st Speed 6 rpm and 2nd Speed 10 rpm)Timer timerSpiral diameter 27 mmDiameter of the tank 580 mm height 230 mm (40 litres) = 35 kg of dough.Comes standard with wheels, 2 of which are equipped with brakes.Optional: scraper in tank, in stainless steel and polyethylene.Analog control panel with low voltage 24V.2-speed motor, gearbox drive (independent tank and fork), self-lubricating, pulley transmission, very quiet...
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
%
%
%
%
2 speeds (Fork: 1st Speed 19 rpm and 2nd Speed 29 rpm) & (Tank: 1st Speed 6 rpm and 2nd Speed 9 rpm)TimerScraper in tank, in stainless steel and polyethylene supplied as standard.Spiral diameter 31 mmDiameter of the tank 660 mm height 330 mm (70 litres) = 60 kg of dough.Comes standard with 2 fixed wheels (nylon) and 2 cylinders at the front.Analog control panel with low voltage 24V.2-speed motor, gearbox drive (independent tank and fork), self-lubricating, pulley transmission, very quiet...
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. (Adjustable) vent valve widely...